STAMPED & FORMED CONTACTS IC SOCKETS Open frame style Very competitively priced Flame retardant Low profile Dual wipe stamped contacts Available on 0.3" & 0.6" pitch SPECIFICATION Material Electrical Insulator: Contacts: Plating: Contact Resistance: Contact Rating: Capacitance: (Adjacent contacts max.) Insulation Resistance: Thermoplastic polyester, UL rated 94V-0 Phosphor bronze Tin/lead Mechanical Vibration: Passed MIL-STD-1334, Method 2005.1, Condition III, 15 G's Shock: Passed MIL-STD-1334, Method 2004.1, Condition G, 100 G's Durability: Passed MIL-STD-1334, Method 2016 Normal Force: 170 Grams (6.0 oz.) with .009" x .015" (0,23 x 0,38) IC lead typ. Contact Retention: 340 Grams (12.0 oz.) minimum Solderability: Passed MIL-STD-202, Method 208 Insertion Force: 169 Grams (6.0 oz) average with a .013"x.020" (0,33 x 0,51) dia. polished steel pin Withdrawal Force: 43 Grams (1.5 oz.) average with a .009" x .015" (0,23 x 0,38) dia. polished steel pin Dielectric Withstanding Voltage: 10 mΩ 2A 5 pF per MIL-STD-202, Method 305 5,000 MΩ @ 500 VDC per MILSTD-1344, Method 3003.1 1,000 Volts rms per MIL-STD-1344, Method 3001 Environmental Humidity: Thermal Shock: Temperature Cycling: Operation Temperature: Salt Spray: Passed MIL-STD-1344, Method 1002.2 Passed MIL-STD-1344, Method 1003.1 Passed MIL-STD-1344, Method 1003.1 Tin -55°C to +105°C Passed MIL-STD-1344, Method 1001.1 OUTLINE DRAWING D .035 (0.89) A 6 8 14 16 18 20 24 24 28 28 32 32 40 42 .300 .400 .700 .800 .900 1.00 1.20 1.20 1.40 1.40 1.60 1.60 2.00 2.10 Polarization Notch B P.C.B. Hole Layout Tolerance ±.002(0.05) .210 (5.33) Max .125 (3.18) Min .015 (0.38) Max .100(2.54) B C Max D .023 (0.58) DBC IC Series IC 32 06=6way 08=8way 14=14way 16=16way 18=18way 20=20way 24=24way *24=24way 28=28way *28=28way 32=32way *32=32way *40=40way *42=42way .400 .600±.005 .300±.005 .600±.005 .300±.005 .600±.005 .600±.005 .600±.005 .700 .400 .700 .400 .700 .700 .700 D .200 .300 .600 .700 .800 .900 1.10 1.50 1.30 1.30 1.50 1.50 1.50 2.00 PCB Thickness Range: Standard .062" and .092" (1,57 and 2,34) PCB Hole Size Range: .035" ± .003" (0,89 ± 0,08) standard tail IC Pin Dimension Range: .008" x .015" (0,20 x 0,38) through .013" x .020" (0,33 x 0,51), .100" 92,54) min. A No. of Ways C .300±.005 Application Dimensions: ORDERING INFORMATION Dubilier Connectors B SC 6 Type of Contact Pitch SC=Stamped & Formed Blank=0.3”Pitch *6=0.6” Pitch 313 www.dubilier.co.uk SECTION 14 .100 (2,54) TYP. No. of Contacts