GRM21BR60J107ME15# “#” indicates a package specification code. < List of part numbers with package codes > GRM21BR60J107ME15L , GRM21BR60J107ME15K Shape Notes Measure capacitance after heat treatment (150C/1hr + room temp./24hr) Volt. & temp. derating recommended product References Packaging Specifications Minimum quantity φ180mm Embossed taping 3000 φ330mm Embossed taping 10000 L size 2.0 ±0.2mm W size 1.25 ±0.2mm 1 piece 23mg T size 1.25 ±0.2mm φ180mm Reel 118g External terminal width e 0.2 to 0.7mm Distance between external terminals g 0.7mm min. Size code in inch(mm) 0805 (2012) Mass (typ.) Specifications Capacitance 100µF ±20% Rated voltage 6.3Vdc Temperature characteristics (complied standard) X5R(EIA) Capacitance change rate ±15.0% Temperature range of temperature characteristics -55 to 85℃ Operating temperature range -55 to 85℃ 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2015/08/20 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Frequency characteristics (ESR, Impedance) S parameter (Smith chart S11) DC bias characteristics AC voltage characteristics Capacitance - temperature characteristics Calorific property by ripple current 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2015/08/20