Mean Well CLG-60-12 60w single output switching power supply Datasheet

CLG-60
60W Single Output Switching Power Supply
series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in active PFC function
IP67 design for indoor or outdoor installations
UL1310 Class 2 power unit
Cooling by free air convection
100% full load burn-in test
High reliability
Suitable for LED lighting and moving sign applications
3 years warranty
110
F
M
M
MODEL
DC VOLTAGE
( except for 48V )
IP67
CLG-60-15
CLG-60-20
CLG-60-24
CLG-60-27
CLG-60-36
15V
20V
24V
27V
36V
CLG-60-48
48V
10.5 ~ 15V
14 ~ 20V
16.8 ~ 24V
18.9 ~ 27V
25.2 ~ 36V
33.6 ~ 48V
RATED CURRENT
5A
4A
3A
2.5A
2.3A
1.7A
1.3A
CURRENT RANGE
0 ~ 5A
0 ~ 4A
0 ~ 3A
0 ~ 2.5A
0 ~ 2.3A
0 ~ 1.7A
0 ~ 1.3A
RATED POWER
60W
60W
60W
60W
62.1W
61W
62.5W
2.4Vp-p
1.8Vp-p
2.7Vp-p
2.7Vp-p
3.6Vp-p
4.6Vp-p
13.8 ~ 16.2V
18 ~ 22V
22 ~ 26V
25 ~ 30V
32.5 ~ 39V
43.6 ~ 51.8V
87%
87%
88%
11 ~ 13V
VOLTAGE ADJ. RANGE
Fixed can be modified between the range above
CURRENT ADJ. RANGE
Fixed can be modified between 3% ~ 25% rated output current
VOLTAGE TOLERANCE Note.3
10%
LINE REGULATION
4.0%
10%
LOAD REGULATION
1500ms, 100ms / 230VAC 3000ms, 100ms / 115VAC at full load
SETUP, RISE TIME
VOLTAGE RANGE
Note.5 90 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
PF>0.9/230VAC
EFFICIENCY(Typ.)
83%
AC CURRENT
INRUSH CURRENT(max.)
0.8A/115VAC
40A/230VAC
OVER VOLTAGE
PF>0.98/115VAC at full load
84.5%
86.5%
86.5%
0.4A/230VAC
130% (max)
95 ~ 110%
OVER CURRENT
SHORT CIRCUIT
127 ~ 370VDC
0.5mA / 240VAC
LEAKAGE CURRENT
PROTECTION
( for 48V only)
12V
RIPPLE & NOISE (max.) Note.2 2Vp-p
INPUT
LPS
CLG-60-12
CONSTANT CURRENT REGION Note.6 8.4 ~ 12V
OUTPUT
SELV
EQUIVALENT
SPECIFICATION
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Note.4 Hiccup mode, recovers automatically after fault condition is removed.
13.8 ~ 16V
17.5 ~ 21V
22.8 ~ 25V
28 ~ 32V
12V: 90
OVER TEMPERATURE
31 ~ 35V
41 ~ 46V
54 ~ 60V
Protection type : Shut down o/p voltage, re-power on to recover
10
15V ~ 48V: 85
(TSW1) detect on heatsink of power transistor
10
(TSW1) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
-30 ~ +70
(Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +80
0.03%/
, 10 ~ 95% RH
(0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL1310 Class 2, TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP67 approved
WITHSTAND VOLTAGE
I/P-O/P:4.25KVDC
SAFETY & ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
EMC
EMI CONDUCTION & RADIATION Compliance to EN55015, EN55022 (CISPR22) Class B
Compliance to EN61000-3-2 Class C (>50% load) ; EN61000-3-3
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A
495.7Khrs min. MIL-HDBK-217F (25
172*61.5*39mm (L*W*H)
0.86Kg; 16pcs/14.8Kg/0.54CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to OLP characteristics.
5. Derating may be needed under low input voltage. Please check the derating curve for more details.
6. Constant current operation region is within 70% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
File Name:CLG-60-SPEC 2008-08-18
CLG-60
60W Single Output Switching Power Supply
Mechanical Specification
Case No. 957A
series
Unit:mm
195.8
172
7.08
9.6
7.28
12
300 20
18AWG 3C
+V(Red)
-V(Black)
32
32
61.36
300 20
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
18AWG 2C
38.75
7.08
7.28
4.2 4PL
Block Diagram
fosc : 90KHz(115VAC)
120KHz(230VAC)
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
FG
+V
-V
DETECTION
CIRCUIT
O.L.P.
PWM & PFC
CONTROL
O.C.P.
O.V.P.
Derating Curve
Static Characteristics
Ta:25
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-30
-25
-5
0
15
30
50
AMBIENT TEMPERATURE ( )
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
264
INPUT VOLTAGE (V) 60Hz
File Name:CLG-60-SPEC 2008-08-18
Similar pages