ETC1 HDD100-24S05-P Dc-dc converter 100w Datasheet

DC-DC CONVERTER
100W
HDD100 SERIES
HDD100 – 24 S 05
WATTAGE
05:
12:
15:
24:
24 : 18~36V IN
48 : 36~72V IN
5V
12V
15V
24V
OUT
OUT
OUT
OUT
MODEL LIST
MODEL NO.
INPUT
VOLTAGE
OUTPUT
WATTAGE
OUTPUT
VOLTAGE
OUTPUT
CURRENT
EFF.
(MIN.)
CASE
Single Output Models
HDD100 – 24S05-X
18~36 VDC
100 WATTS
+
5 VDC
20000 mA
80%
HH
HDD100 – 24S12-X
18~36 VDC
100 WATTS
+ 12 VDC
8300 mA
84%
HH
HDD100 – 24S15-X
18~36 VDC
100 WATTS
+ 15 VDC
6600 mA
84%
HH
HDD100 – 24S24-X
18~36 VDC
100 WATTS
+ 24 VDC
4000 mA
85%
HH
HDD100 – 48S05-X
36~72 VDC
100 WATTS
+ 5 VDC
20000 mA
83%
HH
HDD100 – 48S12-X
36~72 VDC
100 WATTS
+ 12 VDC
8300 mA
85%
HH
HDD100 – 48S15-X
36~72 VDC
100 WATTS
+ 15 VDC
6600 mA
85%
HH
HDD100 – 48S24-X
36~72 VDC
100 WATTS
+ 24 VDC
4000 mA
86%
HH
--SUFFIX “X=P” : PCB MOUNTING TYPE, HEATSINK WILL BE ADDED ON MODULE.
--SUFFIX “X=T” : CHASSIS MOUNTING TYPE:(TERMINAL BLOCK), NO HEATSINK. USE CHASSIS AS HEATSINK OR FAN FORCE
COOLING. INDICATE SUFFIX WHEN ORDER.
--SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICED.
FEATURES
* 100W DC/DC CONVERTER
* 2:1 INPUT RANGE, PI INPUT FILTER
* ISOLATION INPUT AND OUTPUT
* HIGH PERFORMANCE UP TO 86%
* SHORT CIRCUIT PROTECTION
* 2 YEARS WARRANTY
CHINFA ELECTRONICS IND., CO. LTD.
ISO 9001 Certified
www.chinfa.com
[email protected]
HDD100 SERIES
DC-DC CONVERTER
100W
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25℃ Unless Otherwise Noticed
GENERAL SPECIFICATION
* Switching frequency: .........................
* Isolation voltage: ..............................
* Isolation resistance: ..........................
* Operating ambient temperature: .........
* Storage temperature: ........................
* Max. Case temperature: .....................
* M.T.B.F.: ..........................................
* Cooling: ...........................................
* Transient recovery time: ....................
* Temperature coefficient: ....................
* Dimension: ......................................
80KHz (typ.)
1,500VDC
1G Ω(min.)
-25 to +71℃
-25 to +100℃
100℃
100,000Hrs at @ GF40, according to MIL-HDBK-217F
Ffree air convection
500µS, 25% load step change
±0.02% / ℃
88.9 x 140 x 43mm
INPUT SPECIFICATIONS
* Input voltage range / frequency: ........ 18 ~ 36VDC for 24V
36 ~ 72VDC for 48V
* Input filter: ....................................... Pi type
OUTPUT SPECIFICATIONS
* Output voltage accuracy: ...................
* Line regulation: ................................
* Load regulation: ...............................
* Ripple & noise: .................................
* Efficiency: ........................................
* Voltage trim range: ...........................
* Derating: .........................................
* Case material: ..................................
±1% at Vo_nom
±1% at Vo_nom
±2%) at Vo_nom for single output models
±1%mV (max.)
Up to 86%, see model list
±10% at Vo_nom
See table 1
Metal
CONTROL AND PROTECTION
* Remote on/off: ................................. ON : Open or +5.5VDC(Min.)
OFF : +1.8VDC(Max.)
* Output short circuit: .......................... Continuous
CHINFA ELECTRONICS IND., CO. LTD.
ISO 9001 Certified
www.chinfa.com
[email protected]
DC-DC CONVERTER
100W
HDD100 SERIES
MECHANISM & PIN CONFIGURATION
REMOTE ON / OFF CONTROL
TERMINAL 6 CONTROL
LOGIC COMPATIBILITY : ……..………….OPEN COLLECTOR TTL
CONTROL VOLTAGE. ON +5.5V MIN. OR OPEN CIRCUIT.
OFF ……+1.8V MAX.
CONVERTER SHUTDOWN IDLE CURRENT ………………10 mA
CONTROL COMMON …………………..……INPUT TERMINAL 2
EXTERNAL OUTPUT TRIMMING
12
13
13
Trim
Down
14
14
88.9 x 140 x 43mm
3.5 x 5.5 x 1.69inches
CASE SIZE
CASE MATERIAL
Metal
WEIGHT
550 g
Derating: [TABLE 1]
100
10K
Power out [%]
12
Trim
Up
PHYSICAL CHARACTERISTICS
NATURAL
CONVECTION
COOLING
0
-25
60
Ambient Temperture [℃]
PIN ASSIGMENT
PIN NO.
1
2&3
4&5
6
7
8
9
10
11
12
13
14
CASE: HH-P-100
CHINFA ELECTRONICS IND., CO. LTD.
ISO 9001 Certified
70
SINGLE
NO PIN
ViVi+
REMOTE ON/OFF CONTROL
N.C.
VoVoVo+
Vo+
SENSERTrim
SENSER+
CASE: HH-T
www.chinfa.com
[email protected]
100
Similar pages