Ordering number : EN7128B MCH3105/MCH3205 Bipolar Transistor http://onsemi.com (–)50V, (–)3A, Low VCE(sat), (PNP)NPN Single MCPH3 Applicaitons • DC / DC converters, relay drivers, lamp drivers, motor drivers, flash Features • • • • • Large current capacity Adoption of FBET, MBIT processes • High-speed switching Low collector-to-emitter saturation voltage Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) High allowable power dissipation Specifications ( ) : MCH3105 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Ratings Unit (--50)80 V (--50)80 V VCEO (--)50 V VEBO IC (--)6 V (--)3 A Collector Dissipation ICP IB PC Junction Temperature Tj Storage Temperature Tstg Base Current Conditions VCBO VCES (--)6 (--)600 When mounted on ceramic substrate (600mm2×0.8mm) A mA 0.8 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7019A-004 • Package : MCPH3 • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel 0.25 MCH3105-TL-E MCH3205-TL-E 0.15 2.0 Packing Type : TL Marking 1.6 2.1 CE LOT No. AE LOT No. 0 to 0.02 LOT No. LOT No. 3 0.25 TL 1 0.65 2 MCH3105 MCH3205 0.3 0.07 0.85 Electrical Connection 3 1 : Base 2 : Emitter 3 : Collector 1 MCPH3 1 2 MCH3105 Semiconductor Components Industries, LLC, 2013 September, 2013 3 2 MCH3205 80812 TKIM/D1504EA TSIM TB-00000346/13002 TSIM TA-3357 No.7128-1/7 MCH3105 / MCH3205 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)500mA Output Capacitance Cob VCE(sat)1 VCB=(--)10V, f=1MHz IC=(--)1A, IB=(--)50mA VCE(sat)2 VBE(sat) IC=(--)2A, IB=(--)100mA IC=(--)2A, IB=(--)100mA V(BR)CBO V(BR)CES IC=(--)10μA, IE=0A IC=(--)100μA, RBE=0Ω V(BR)CEO IC=(--)1mA, RBE=∞ IE=(--)10μA, IC=0A Emitter Cutoff Current DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage V(BR)EBO ton Turn-On Time Storage Time min typ 200 max Unit (--)1 μA (--)1 μA 560 (360)380 MHz (24)13 pF (--100)80 (--200)120 mV (--185)140 (--500)210 mV (--)0.88 (--)1.2 V (--50)80 V (--50)80 V (--)50 V (--)6 V (30)35 tstg tf Fall Time Ratings Conditions See specified Test Circuit. ns (230)300 ns (15)22 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% OUTPUT IB2 INPUT RB VR RL 50Ω + 470μF + 100μF VBE= --5V VCC=25V IC=10IB1= --10IB2=1A (For PNP, the polarity is reversed.) Ordering Information Package Shipping MCH3105-TL-E Device MCPH3 3,000pcs./reel MCH3205-TL-E MCPH3 3,000pcs./reel IC -- VCE MCH3105 Collector Current, IC -- A 0 --4 mA 5.0 0m --3 A --20 mA --1.6 --8m --10m A A --6mA --1.2 Pb Free IC -- VCE MCH3205 4.5 --4mA --0.8 --2mA --0.4 Collector Current, IC -- A --2.0 memo 100m 80mA A 4.0 60mA 3.5 40mA 3.0 2.5 20mA 2.0 10mA 1.5 5mA 1.0 0.5 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V --1.0 IT03963 IB=0 0 0 0.4 0.8 1.2 1.6 Collector-to-Emitter Voltage, VCE -- V 2.0 IT03964 No.7128-2/7 MCH3105 / MCH3205 IC -- VBE 3.0 3.0 MCH3105 VCE= --2V 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Base-to-Emitter Voltage, VBE -- V 25°C 100 7 5 3 2 7 5 2 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 5 3 2 100 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 5 7 2 0.1 3 5 5 3 2 100 7 5 3 2 3 5 7 0.1 2 3 5 7 1.0 Output Capacitance, Cob -- pF 5 MCH3205 f=1MHz 7 2 3 IT03970 Cob -- VCB 100 3 2 Collector Current, IC -- A MCH3105 f=1MHz 3 IT03968 MCH3205 VCE=10V IT03969 5 2 1.0 f T -- IC 7 2 0.01 5 7 7 Collector Current, IC -- A Cob -- VCB 100 3 1000 MCH3105 VCE= --10V 7 2 IT03967 f T -- IC 1000 2 --0.01 10 0.01 3 --25°C 25°C 3 3 Ta=75°C 100 2 2 1.0 IT03966 MCH3205 VCE=2V 5 3 10 --0.01 0.8 7 DC Current Gain, hFE --25°C 0.6 hFE -- IC 1000 Gain-Bandwidth Product, f T -- MHz DC Current Gain, hFE 3 0.4 Base-to-Emitter Voltage, VBE -- V Ta=75°C 2 0.2 IT03965 MCH3105 VCE= --2V 7 5 0 1.0 hFE -- IC 1000 Gain-Bandwidth Product, f T -- MHz 1.0 0.5 0.5 Output Capacitance, Cob -- pF 1.5 C 25°C --25°C 1.0 2.0 Ta=75° 1.5 --25°C C 25°C 2.0 Collector Current, IC -- A 2.5 Ta=75° Collector Current, IC -- A 2.5 IC -- VBE MCH3205 VCE=2V 5 3 2 10 7 5 3 10 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 IT03971 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT03972 No.7128-3/7 MCH3105 / MCH3205 VCE(sat) -- IC --1000 7 5 3 2 C 75° Ta= C C 25° 25° 3 2 -- --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --1000 7 5 3 2 °C =75 Ta °C 25°C --25 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Ta= --25°C 7 25°C 3 2 --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 7 5 ASO 1m DC 3 2 op s era 3 2 0.1 7 5 0m s s 0μ 1.0 7 5 m s 50 10 tio n MCH3105 / MCH3205 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V 25 C --25° 2 3 5 7 0.1 2 °C 3 5 7 1.0 2 3 5 IT03974 VCE(sat) -- IC MCH3205 IC / IB=50 5 3 2 100 7 C 75° Ta= C --25° 5 3 25 °C 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 IT03976 VBE(sat) -- IC MCH3205 IC / IB=50 3 2 1000 Ta= --25°C 7 75°C 5 25°C 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 IT03978 PC -- Ta 1.0 IC=3A 10 2 Collector Current, IC -- A ICP=6A s 0μ 10 3 2 7 Ta= 100 0.01 5 7 --10 IT03977 Collector Current, IC -- A Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 2 Collector Dissipation, PC -- W Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 3 75°C 5°C 3 5 MCH3105 IC / IB=50 5 5 Collector Current, IC -- A VBE(sat) -- IC --1000 7 10 0.01 5 7 --10 IT03975 Collector Current, IC -- A 5 100 7 3 2 3 2 2 1000 MCH3105 IC / IB=50 --100 7 5 3 Collector Current, IC -- A VCE(sat) -- IC --10000 7 5 5 10 0.01 5 7 --10 IT03973 Collector Current, IC -- A MCH3205 IC / IB=20 7 3 2 --100 7 5 VCE(sat) -- IC 1000 MCH3105 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --10000 7 5 0.8 M ou nt 0.6 ed on ac er am ic bo ar 0.4 d( 60 0m m2 ✕0 0.2 .8m m ) 0 3 5 7 IT03980 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03981 No.7128-4/7 MCH3105 / MCH3205 Taping Specification MCH3105-TL-E, MCH3205-TL-E No.7128-5/7 MCH3105 / MCH3205 Outline Drawing MCH3105-TL-E, MCH3205-TL-E Land Pattern Example Mass (g) Unit 0.007 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.7128-6/7 MCH3105 / MCH3205 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7128-7/7