BZX84-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar Zener diodes 3 • The Zener voltages are graded according to the international E24 standard. Standard Zener voltage tolerance is ± 5 %, indicated by the “C” in the ordering code. Replace “C” with “B” for ± 2 % tolerance. 2 1 20421 • AEC-Q101 qualified • ESD capability acc. to AEC-Q101: human body model: > 8 kV, machine model: > 800 V PRIMARY CHARACTERISTICS PARAMETER VALUE • Base P/N-E3 - RoHS-compliant, commercial grade UNIT • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified VZ range nom. 2.4 to 75 V Test current IZT 2; 5 mA VZ specification Pulse current Int. construction Single • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 (8 mm tape on 7" reel) 15 000 10 000 (8 mm tape on 13" reel) 10 000 BZX84C2V4-E3-08 to BZX84C75-E3-08 BZX84B2V4-E3-08 to BZX84B75-E3-08 BZX84C2V4-HE3-08 to BZX84C75-HE3-08 BZX84-series BZX84B2V4-HE3-08 to BZX84B75-HE3-08 BZX84C2V4-E3-18 to BZX84C75-E3-18 BZX84B2V4-E3-18 to BZX84B75-E3-18 BZX84C2V4-HE3-18 to BZX84C75-HE3-18 BZX84B2V4-HE3-18 to BZX84B75-HE3-18 PACKAGE PACKAGE NAME SOT-23 WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation Tamb = 25 °C, device on fiberglass substrate, acc. layout on page 7 Ptot 300 mW Thermal resistance junction to ambient air Tamb = 25 °C, device on fiberglass substrate, acc. layout on page 7 RthJA 420 K/W Tj 150 °C Storage temperature range Tstg - 65 to + 150 °C Operating temperature range Top - 55 to + 150 °C Junction temperature Rev. 2.0, 28-Feb-13 Document Number: 85763 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE f = 1 kHz TEMPERATURE COEFFICIENT IR at VR ZZ at IZT1 ZZK at IZT2 VZ at IZT1 10-4/°C IZT2 mA μA V MIN. NOM. MAX. MAX. MAX. MIN. MAX. BZX84C2V4 Z11 2.2 2.4 2.6 5 1 50 1 100 275 -9 -4 BZX84C2V7 Z12 2.5 2.7 2.9 5 1 20 1 100 600 -9 -4 BZX84C3V0 Z13 2.8 3.0 3.2 5 1 10 1 95 600 -9 -3 BZX84C3V3 Z14 3.1 3.3 3.5 5 1 5 1 95 600 -8 -3 BZX84C3V6 Z15 3.4 3.6 3.8 5 1 5 1 90 600 -8 -3 BZX84C3V9 Z16 3.7 3.9 4.1 5 1 3 1 90 600 -7 -3 BZX84C4V3 Z17 4.0 4.3 4.6 5 1 3 1 90 600 -6 -1 BZX84C4V7 Z1 4.4 4.7 5.0 5 1 3 2 80 500 -5 2 BZX84C5V1 Z2 4.8 5.1 5.4 5 1 2 2 60 480 -3 4 BZX84C5V6 Z3 5.2 5.6 6.0 5 1 1 2 40 400 -2 6 BZX84C6V2 Z4 5.8 6.2 6.6 5 1 3 4 10 150 -1 7 BZX84C6V8 Z5 6.4 6.8 7.2 5 1 2 4 15 80 2 7 BZX84C7V5 Z6 7.0 7.5 7.9 5 1 1 5 15 80 3 7 BZX84C8V2 Z7 7.7 8.2 8.7 5 1 0.7 5 15 80 4 7 BZX84C9V1 Z8 8.5 9.1 9.6 5 1 0.5 6 15 100 5 8 BZX84C10 Z9 9.4 10 10.6 5 1 0.2 7 20 150 5 8 BZX84C11 Y1 10.4 11 11.6 5 1 0.1 8 20 150 5 9 BZX84C12 Y2 11.4 12 12.7 5 1 0.1 8 25 150 6 9 BZX84C13 Y3 12.4 13 14.1 5 1 0.1 8 30 170 7 9 BZX84C15 Y4 13.8 15 15.6 5 1 0.05 10.5 30 200 7 9 BZX84C16 Y5 15.3 16 17.1 5 1 0.05 11.2 40 200 8 9.5 BZX84C18 Y6 16.8 18 19.1 5 1 0.05 12.6 45 225 8 9.5 BZX84C20 Y7 18.8 20 21.2 5 1 0.05 14.0 55 225 8 10 BZX84C22 Y8 20.8 22 23.3 5 1 0.05 15.4 55 250 8 10 BZX84C24 Y9 22.8 24 25.6 5 1 0.05 16.8 70 250 8 10 BZX84C27 Y10 25.1 27 28.9 2 0.5 0.05 18.9 80 300 8 10 BZX84C30 Y11 28 30 32 2 0.5 0.05 21.0 80 300 8 10 BZX84C33 Y12 31 33 35 2 0.5 0.05 23.1 80 325 8 10 BZX84C36 Y13 34 36 38 2 0.5 0.05 25.2 90 350 8 10 BZX84C39 Y14 37 39 41 2 0.5 0.05 27.3 130 350 10 12 BZX84C43 Y15 40 43 46 2 0.5 0.05 30.1 150 375 10 12 BZX84C47 Y16 44 47 50 2 0.5 0.05 32.9 170 375 10 12 BZX84C51 Y17 48 51 54 2 0.5 0.05 35.7 180 400 10 12 BZX84C56 Y18 52 56 60 2 0.5 0.05 39.2 200 425 9 11 BZX84C62 Y19 58 62 66 2 0.5 0.05 43.4 215 450 9 12 BZX84C68 Y20 64 68 72 2 0.5 0.05 47.6 240 475 10 12 BZX84C75 Y21 70 75 79 2 0.5 0.05 52.5 255 500 10 12 Rev. 2.0, 28-Feb-13 Document Number: 85763 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE f = 1 kHz TEMPERATURE COEFFICIENT IR at VR ZZ at IZT1 ZZK at IZT2 VZ at IZT1 10-4/°C IZT2 mA μA V MIN. NOM. MAX. MAX. MAX. MIN. MAX. BZX84B2V4 Z50 2.35 2.4 2.45 5 1 50 1 100 275 -9 -4 BZX84B2V7 Z51 2.65 2.7 2.75 5 1 20 1 100 600 -9 -4 BZX84B3V0 Z52 2.94 3.0 3.06 5 1 10 1 95 600 -9 -3 BZX84B3V3 Z53 3.23 3.3 3.37 5 1 5 1 95 600 -8 -3 BZX84B3V6 Z54 3.53 3.6 3.67 5 1 5 1 90 600 -8 -3 BZX84B3V9 Z55 3.82 3.9 3.98 5 1 3 1 90 600 -7 -3 BZX84B4V3 Z56 4.21 4.3 4.39 5 1 3 1 90 600 -6 -1 BZX84B4V7 Z57 4.61 4.7 4.79 5 1 3 2 80 500 -5 2 BZX84B5V1 Z58 5.0 5.1 5.2 5 1 2 2 60 480 -3 4 BZX84B5V6 Z59 5.49 5.6 5.71 5 1 1 2 40 400 -2 6 BZX84B6V2 Z60 6.08 6.2 6.32 5 1 3 4 10 150 -1 7 BZX84B6V8 Z61 6.66 6.8 6.94 5 1 2 4 15 80 2 7 BZX84B7V5 Z62 7.35 7.5 7.65 5 1 1 5 15 80 3 7 BZX84B8V2 Z63 8.04 8.2 8.36 5 1 0.7 5 15 80 4 7 BZX84B9V1 Z64 8.92 9.1 9.28 5 1 0.5 6 15 100 5 8 BZX84B10 Z65 9.8 10 10.2 5 1 0.2 7 20 150 5 8 BZX84B11 Z66 10.8 11 11.2 5 1 0.1 8 20 150 5 9 BZX84B12 Z67 11.8 12 12.2 5 1 0.1 8 25 150 6 9 BZX84B13 Z68 12.7 13 13.3 5 1 0.1 8 30 170 7 9 BZX84B15 Z69 14.7 15 15.3 5 1 0.05 10.5 30 200 7 9 BZX84B16 Z70 15.7 16 16.3 5 1 0.05 11.2 40 200 8 9.5 BZX84B18 Z71 17.6 18 18.4 5 1 0.05 12.6 45 225 8 9.5 BZX84B20 Z72 19.6 20 20.4 5 1 0.05 14 55 225 8 10 BZX84B22 Z73 21.6 22 22.4 5 1 0.05 15.4 55 250 8 10 BZX84B24 Z74 23.5 24 24.5 5 1 0.05 16.8 70 250 8 10 BZX84B27 Z75 26.5 27 27.5 2 0.5 0.05 18.9 80 300 8 10 BZX84B30 Z76 29.4 30 30.6 2 0.5 0.05 21 80 300 8 10 BZX84B33 Z77 32.3 33 33.7 2 0.5 0.05 23.1 80 325 8 10 BZX84B36 Z78 35.3 36 36.7 2 0.5 0.05 25.2 90 350 8 10 BZX84B39 Z79 38.2 39 39.8 2 0.5 0.05 27.3 130 350 10 12 BZX84B43 Z80 42.1 43 43.9 2 0.5 0.05 30.1 150 375 10 12 BZX84B47 Z81 46.1 47 47.9 2 0.5 0.05 32.9 170 375 10 12 BZX84B51 Z82 50 51 52 2 0.5 0.05 35.7 180 400 10 12 BZX84B56 Z83 54.9 56 57.1 2 0.5 0.05 39.2 200 425 9 11 BZX84B62 Z84 60.8 62 63.2 2 0.5 0.05 43.4 215 450 9 12 BZX84B68 Z85 66.6 68 69.4 2 0.5 0.05 47.6 240 475 10 12 BZX84B75 Z86 73.5 75 76.5 2 0.5 0.05 52.5 255 500 10 12 Rev. 2.0, 28-Feb-13 Document Number: 85763 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) mA 103 Ω 100 TJ = 25 °C 102 IF 5 4 10 3 rzj TJ = 100 °C 1 10-1 33 2 27 22 10 TJ = 25 °C 10-2 18 15 5 4 10-3 12 3 10 2 10-4 10-5 0 6.8/8.2 6.2 1 0.2 0.4 0.6 0.8 1V VF 18114 0.1 2 1 5 2 5 18119 Fig. 1 - Forward Characteristics 10 IZ 2 5 100 mA Fig. 4 - Dynamic Resistance vs. Zener Current Ω 103 mW 500 Tj = 25 °C 7 5 4 400 Rzj 47 + 51 43 39 36 3 Ptot 2 300 102 7 200 5 4 3 100 2 10 0.1 0 0 100 200 °C Tamb 18115 Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature 3 4 5 2 3 4 5 IZ Ω 103 TJ = 25 °C 5 4 3 2 1 10 mA Fig. 5 - Dynamic Resistance vs. Zener Current Ω 1000 rzj 2 18120 Rzth Rzth = RthA x VZ x 5 4 3 2 Δ VZ ΔTj 102 100 5 4 3 5 4 3 2 2 10 2.7 3.6 4.7 5.1 5 4 3 2 5.6 1 0.1 18117 2 5 1 2 5 10 2 5 100 mA IZ Fig. 3 - Dynamic Resistance vs. Zener Current Rev. 2.0, 28-Feb-13 10 5 4 3 negative 2 positive 1 1 18121 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 6 - Thermal Differential Resistance vs. Zener Voltage Document Number: 85763 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors Ω 100 mV/°C 100 IZ = 5 mA 7 5 4 Rzj Δ VZ ΔTj 3 2 80 60 10 7 40 5 4 3 20 2 Tj = 25 °C IZ = 5 mA 1 1 2 3 10 4 5 2 3 4 5 18122 0 0 100 V VZ 20 60 40 Fig. 7 - Dynamic Resistance vs. Zener Voltage 80 100 V VZ 18125 Fig. 10 - Temperature Dependence of Zener Voltage vs. Zener Voltage mV/°C 25 V 9 20 7 8 Δ VZ ΔTj 5 mA IZ = 1 mA 20 mA 15 Δ VZ 51 6 5 43 4 10 36 3 5 2 1 0 0 -5 1 2 3 4 5 10 2 100 V 3 4 5 0 VZ 18123 25 0.7 VZ at IZ = 5 mA 0.6 8 0.4 7 0.3 0.2 6.2 5.9 0.1 5.6 0 1 0.8 0.6 0.4 0.2 0 5.1 -1 3.6 20 40 60 80 4.7 100 120 140 C Tj Fig. 9 - Change of Zener Voltage vs. Junction Temperature Rev. 2.0, 28-Feb-13 140 °C 1.2 Δ VZ 0 80 100 120 Tj ΔVZ = Rzth x IZ 1.4 0.5 18124 60 V 1.6 15 10 - 0.2 40 Fig. 11 - Change of Zener Voltage vs. Junction Temperature V 0.8 20 18126 Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage Δ VZ IZ = 2 mA -1 - 0.2 - 0.4 18127 1 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 12 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage Document Number: 85763 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors mA 30 V 5 10 12 ΔVZ = Rzth x IZ Tj = 25 °C 4 lZ Δ VZ 3 15 20 18 IZ = 5 mA 22 2 27 Test 10 current IZ 5 mA 1 33 36 IZ = 2 mA 0 0 0 20 40 60 0 100 V 80 Tj = 25 °C 40 lZ 8.2 8 lZ 30 6 20 4 Test current IZ 5 mA 10 40 V Tj = 25 °C 6.8 3.3 4.7 30 VZ mA 10 3.9 5.6 2.7 20 Fig. 15 - Breakdown Characteristics Fig. 13 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage mA 50 10 18112 VZ 18128 Test current IZ 5 mA 39 51 43 47 2 0 0 0 18111 1 2 3 4 5 6 7 8 9 10 V VZ Fig. 14 - Breakdown Characteristics Rev. 2.0, 28-Feb-13 0 18113 10 20 30 40 50 60 70 80 90 100 V VZ Fig. 16 - Breakdown Characteristics Document Number: 85763 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZX84-Series www.vishay.com Vishay Semiconductors LAYOUT FOR RthJA TEST Thickness: fiberglass 0.059" (1.5 mm) Copper leads 0.012" (0.3 mm) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 2.0, 28-Feb-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 85763 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000