GS25E 20~25W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range No load power consumption<0.5W Pass energy star(CEC) level regulation Meet EISA 2007 (Energy Independence and Security Act) 2 pole EURO plug Class power (without earth pin) Full output 5~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: TUV / CB / CE Pass LPS for 9~48V output 2 years warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. GS25E05-P1J GS25E07-P1J GS25E09-P1J GS25E12-P1J GS25E15-P1J GS25E18-P1J GS25E24-P1J GS25E28-P1J GS25E48-P1J SAFETY MODEL NO. DC VOLTAGE OUTPUT GS25E05 Note.2 5V GS25E07 GS25E09 GS25E12 GS25E15 GS25E18 GS25E24 GS25E28 7.5V 9V 12V 15V 18V 24V 28V 48V 0.52A 4.0A 2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.89A CURRENT RANGE 0 ~ 4.0A 0 ~ 2.93A 0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A 0 ~ 1.38A 0 ~ 1.04A 0 ~ 0.89A 0 ~ 0.52A RATED POWER (max.) 20W 22W 25W 25W 25W 25W 25W 25W 25W 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p 80mVp-p 80mVp-p 80mVp-p VOLTAGE TOLERANCE Note.4 RIPPLE & NOISE (max.) Note.3 50mVp-p 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% FREQUENCY RANGE 74% AC CURRENT INRUSH CURRENT (max.) 0.7A / 100VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 500ms, 20ms, 15ms/115VAC at full load 47 ~ 63Hz EFFICIENCY (Typ.) LEAKAGE CURRENT(max.) 78% 79% CONNECTOR NOTE EMS IMMUNITY MTBF DIMENSION 81% 82% 82% 83% 83% 84% 45A / 230VAC 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60950-1 approved I/P-O/P:4242VDC SAFETY & I/P-O/P:100M Ohms / 500VDC / 25 ISOLATION RESISTANCE EMC Compliance to EN55022 class B EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 OTHERS GS25E48 RATED CURRENT SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC INPUT geprUfre Sicherheit / 70% RH Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A PACKING PLUG 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 210g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested CABLE Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS25E-SPEC 2008-05-08 GS25E 20~25W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm 38 UL1185 16AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for 7.5~48V 70 10mm POWER LED C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 Standard plug: P1J (option) 54 P1J OUTPUT CENTER + Static Characteristics Derating Curve 100 100 LOAD (%) LOAD (%) P/N 70 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:GS25E-SPEC 2008-05-08