Green L Band Red/Blue Pass Micro-Optic WDM MWDMGLR/LB Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. This device offers flat and wide passband, low insertion loss, and high isolation, which make this device ideal for high-power Optical Amplification Systems and DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMGLR/LB Series Min Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Typical Max Unit Features Environmental Green Plan Compliance Type LR 1589.0 1603.0 nm Type LB 1570.0 1584.0 nm Type LR 1570.0 1584.0 nm Wide Operating Wavelength Range Type LB 1589.0 1603.0 nm Low Insertion Loss 0.8 0.5 dB Insertion Loss * Pass Channel @ λ1 Reflect Channel @ λ2 Isolation Reflect Channel @ λ1 Pass Channel @ λ2 12 20 Passband Ripple 0.30 High Channel Isolation Ultra Flat Wide Passband dB Highly Stable & Reliable dB Epoxy-free Optical Path Directivity 50 dB Return Loss 50 dB Polarization Dependent Loss 0.1 dB Applications Polarization Mode Dispersion 0.05 ps Maximum Power Handling 500 mW Fiberoptic Amplifiers Fiber Type Corning SMF-28 Operating Temperature Storage Temperature Package Dimensions ** 250 μm Bare Fiber 900 μm Loose Tube 0 to +70 °C -40 to +85 °C P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm System Monitoring Fiberoptic Instruments Laboratory R&D Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. R03.20081118 Green L Band Red/Blue Pass Micro-Optic WDM MWDMGLR/LB Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG L 0 0 0 0 Band Wavelength Fiber Length* L band = L Red pass = R Blue pass = B 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081118 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules