Online data sheet DT500-A523 Dx500 LONG RANGE DISTANCE SENSORS DT500-A523 | Dx500 LONG RANGE DISTANCE SENSORS A B C D E F Ordering information Type Part no. DT500-A523 1040472 Other models and accessories www.sick.com/Dx500 Detailed technical data Performance Measuring range 0.2 m ... 70 m, 90 % remission 1) 2) 0.2 m ... 30 m, 6 % remission 1) 2) H I J K L M N O P Q R S T Resolution ≤ 0.1 mm Repeatability 1 mm 3) 4) Accuracy ± 3 mm 3) Output time 150 ms ... 6,000 ms Light source Laser, red 5) Laser class 2 (EN 60825/21 CFR 1.040) Typ. light spot size (distance) 10 mm (at 7 m) 45 mm (at 30 m) 100 mm (at 70 m) 1) 2) 3) 4) 5) In ambient light, max. 1 klx of constant light. Unique up to 150 m. 6 % ... 90 % remission. Statistical error 1 σ. Average service life of 50,000 h at TA = +25 °C. Interfaces Laser-off input > 12 V Data interface CAN (Layer 2) CAN address 11 bit, setup via display Resolution CAN 0.1 mm Mechanics/electronics Supply voltage Vs DC 10 V ... 30 V, reverse polarity protected UV ≥ DC 24 V for devices with heating Ripple 5 Vpp 1) Power consumption Typ. 3 W Initialization time 500 ms Connection type Male connector, M12, 8-pin Weight 1,000 g 1) 2 May not fall short of or exceed VS tolerances. DISTANCE SENSORS | SICK Online data sheet | 2016-05-02 22:08:07 Subject to change without notice DT500-A523 | Dx500 LONG RANGE DISTANCE SENSORS Ambient data Enclosure rating IP 65 Protection class II 1) Electromagnetic compatibility (EMC) EN 61000-6-2, EN 55011 EN 60947-5-7: 2003-9 Ambient temperature Operation: –10 °C ... +45 °C Operation with cooling case: –10 °C ... +75 °C Storage: –25 °C ... +75 °C Temperature drift Typ. 0.05 mm/K Mechanical load Shock: EN 600 68-2-27 / –2-29 Sine: EN 600 68-2-6 Noise: EN 600 68-2-64 1) Reference voltage DC 32 V. 2 69 (2.72) (0.08) Dimensional drawing (Dimensions in mm (inch)) approx. 20 153 (6.02) (0.79) 33 (1.30) 2 3 48 (1.89) 21 (0.83) 28 (1.10) 1 4 146 (5.75) 26 (1.02) 105 (4.13) 15 110 (4.33) 104 (4.09) 90 (3.54) Q2 49 (1.93) ① ② ③ ④ ⑤ 35 (1.38) M12 Q1 90 (3.54) (0.59) 5 Ø9 (0.35) Optical axis, sender Optical axis, receiver Male connector M12, 5-pin Zero level Fixing hole Connection type DT500-Axx3 CAN (Layer 2) Connector M12, 8-pin 2016-05-02 22:08:07 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 DT500-A523 | Dx500 LONG RANGE DISTANCE SENSORS A B C D E F Connection diagram wht 1 brn 2 grn 3 yel 4 gra 5 pnk 6 blu 7 red 8 L+ CAN Low out CAN High out CAN Low in CAN High in M nc 2 ① Multifunctional input (MF) ② Not assigned Adjustment possible on H I J K L M N O P Q R S T MF 1 6 7 ENTER 8 ESC ⑥ Operating indicator ⑦ Indicator panel, 7-segment display ⑧ Control panel 4 DISTANCE SENSORS | SICK Online data sheet | 2016-05-02 22:08:07 Subject to change without notice DT500-A523 | Dx500 LONG RANGE DISTANCE SENSORS Functional principle Additional information Extern Teach ET via MF 1 Teach-in MF active 0 mA 100 ms 4 mA 200 ms 20 mA 300 ms Laser off > 450 ms Model Current measurement value is used 1 Multi functional input. Error performance or no object in measurement range Measurement not possible Measurement value output display Analog interface CAN Bus Serial interface 0.000 0/3.5 mA 00000 00000 CRLF Measurement value output display Analog interface CAN Bus Serial interface 99.99 20.5 mA 99999 99999 CRLF Function MF input Function MF input Teach in 0 mA 60 ms < MF < 150 ms Teach in 4 mA 150 ms < MF < 250 ms Teach in 20 mA 250 ms < MF < 350 ms Laser off – 450 ms < MF < ∞ Recommended accessories Other models and accessories www.sick.com/Dx500 Brief description Type Part no. BEF-DSDT 2031377 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: PVC, unshielded, 2 m DOL-1205-G02M 6008899 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: PVC, unshielded, 5 m DOL-1205-G05M 6009868 Terminal and alignment brackets Alignment unit for DS/DT500, stainless steel (1.4541), incl. mounting material, mounting hardware included Plug connectors and cables 2016-05-02 22:08:07 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 DT500-A523 | Dx500 LONG RANGE DISTANCE SENSORS A B C D E F H I J K L M N O P Q R S T Brief description Head A: female connector, M12, 5-pin, straight Head B: cable Cable: PVC, unshielded, 10 m 6 DISTANCE SENSORS | SICK Type Part no. DOL-1205-G10M 6010544 Online data sheet | 2016-05-02 22:08:07 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com