AOSMD AOWF8N50 500v, 8a n-channel mosfet Datasheet

AOWF8N50
500V, 8A N-Channel MOSFET
General Description
Product Summary
The AOWF8N50 has been fabricated using an advanced
high voltage MOSFET process that is designed to deliver
high levels of performance and robustness in popular ACDC applications.
By providing low RDS(on), Ciss and Crss along with
guaranteed avalanche capability this part can be adopted
quickly into new and existing offline power supply
designs.
VDS
ID (at VGS=10V)
600V@150℃
8A
RDS(ON) (at VGS=10V)
< 0.85Ω
100% UIS Tested
100% Rg Tested
TO-262F
Top View
Bottom View
D
G
D
S
S
D
G
G
S
AOWF8N50
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
TC=25°C
Continuous Drain
Current
Pulsed Drain Current
TC=100°C
C
ID
AOWF8N50
500
Units
V
±30
V
8*
6*
A
IDM
30
Avalanche Current C
IAR
3.2
A
Repetitive avalanche energy C
EAR
154
mJ
307
5
27.8
mJ
V/ns
W
0.22
-55 to 150
W/ oC
°C
300
°C
AOWF8N50
65
4.5
Units
°C/W
°C/W
Single plused avalanche energy G
EAS
Peak diode recovery dv/dt
dv/dt
TC=25°C
PD
Power Dissipation B Derate above 25oC
Junction and Storage Temperature Range
TJ, TSTG
Maximum lead temperature for soldering
TL
purpose, 1/8" from case for 5 seconds
Thermal Characteristics
Parameter
Symbol
Maximum Junction-to-Ambient A,D
RθJA
Maximum Junction-to-Case
RθJC
* Drain current limited by maximum junction temperature.
Rev0: Dec 2011
www.aosmd.com
Page 1 of 5
AOWF8N50
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min
ID=250µA, VGS=0V, TJ=25°C
500
Typ
Max
Units
STATIC PARAMETERS
BVDSS
Drain-Source Breakdown Voltage
BVDSS
/∆TJ
Zero Gate Voltage Drain Current
IDSS
Zero Gate Voltage Drain Current
ID=250µA, VGS=0V, TJ=150°C
600
ID=250µA, VGS=0V
V
V/ oC
0.56
VDS=500V, VGS=0V
1
VDS=400V, TJ=125°C
10
IGSS
Gate-Body leakage current
VDS=0V, VGS=±30V
VGS(th)
Gate Threshold Voltage
VDS=5V ID=250µA
RDS(ON)
Static Drain-Source On-Resistance
VGS=10V, ID=4A
gFS
Forward Transconductance
VDS=40V, ID=4A
VSD
Diode Forward Voltage
IS=1A,VGS=0V
±100
3.4
µA
4
4.5
nΑ
V
0.63
0.85
Ω
1
V
10
S
0.73
IS
Maximum Body-Diode Continuous Current
8
A
ISM
Maximum Body-Diode Pulsed Current
30
A
DYNAMIC PARAMETERS
Input Capacitance
Ciss
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
VGS=0V, VDS=25V, f=1MHz
VGS=0V, VDS=0V, f=1MHz
SWITCHING PARAMETERS
Qg
Total Gate Charge
Qgs
Gate Source Charge
Qgd
Gate Drain Charge
VGS=10V, VDS=400V, ID=8A
694
868
1042
pF
65
93
121
pF
4.5
7.8
11
pF
2
4
6
Ω
18
23.6
28
nC
4
5.2
6.2
nC
5.2
10.6
16
nC
tD(on)
Turn-On DelayTime
tr
Turn-On Rise Time
tD(off)
Turn-Off DelayTime
tf
trr
Turn-Off Fall Time
Body Diode Reverse Recovery Time
IF=8A,dI/dt=100A/µs,VDS=100V
160
206
247
Qrr
Body Diode Reverse Recovery Charge IF=8A,dI/dt=100A/µs,VDS=100V
1.7
2.1
2.6
VGS=10V, VDS=250V, ID=8A,
RG=25Ω
19.5
ns
47
ns
51.5
ns
38.5
ns
ns
µC
A. The value of R θJA is measured with the device in a still air environment with T A =25°C.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial
TJ =25°C.
D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. L=60mH, IAS=3.2A, VDD=150V, RG=25Ω, Starting TJ=25°C
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev0: Dec 2011
www.aosmd.com
Page 2 of 5
AOWF8N50
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
16
100
10V
14
12
10
10
6V
ID(A)
ID (A)
-55°C
VDS=40V
6.5V
8
125°C
6
1
VGS=5.5V
4
25°C
2
0
0.1
0
5
10
15
20
25
30
2
4
VDS (Volts)
Fig 1: On-Region Characteristics
8
10
3
Normalized On-Resistance
1.6
1.4
1.2
RDS(ON) (Ω
Ω)
6
VGS(Volts)
Figure 2: Transfer Characteristics
1.0
0.8
VGS=10V
2.5
VGS=10V
ID=4A
2
1.5
1
0.5
0.6
0
0.4
-100
0
2
4
6
8
10 12 14 16 18
ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage
-50
0
50
100
150
200
Temperature (°C)
Figure 4: On-Resistance vs. Junction Temperature
1.0E+02
1.2
40
1.0E+00
IS (A)
BVDSS (Normalized)
1.0E+01
1.1
1
125°C
1.0E-01
25°C
1.0E-02
1.0E-03
0.9
1.0E-04
0.8
1.0E-05
-100
-50
0
50
100
150
200
TJ (°C)
Figure 5:Break Down vs. Junction Temparature
Rev0: Dec 2011
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 5
AOWF8N50
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10000
15
VDS=400V
ID=8A
12
Ciss
Capacitance (pF)
VGS (Volts)
1000
9
6
Coss
100
10
3
Crss
1
0
0
5
10
15
20
25
30
Qg (nC)
Figure 7: Gate-Charge Characteristics
0.1
35
10
100
8
10
1
10
VDS (Volts)
Figure 8: Capacitance Characteristics
100
ID (Amps)
Current rating ID(A)
10µs
6
4
RDS(ON)
limited
100µs
1ms
1
10ms
0.1s
DC
0.1
1s
TJ(Max)=150°C
TC=25°C
2
0.01
0
1
0
25
50
75
100
125
TCASE (°C)
Figure 9: Current De-rating (Note B)
10
100
1000
VDS (Volts)
150
Figure 10: Maximum Forward Biased Safe
Operating Area for AOWF8N50 (Note F)
Zθ JC Normalized Transient
Thermal Resistance
10
1
D=Ton/T
TJ,PK=TC+PDM.ZθJC.RθJC
RθJC=4.5°C/W
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
0.1
PD
0.01
Ton
T
Single Pulse
0.001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance for AOWF8N50 (Note F)
Rev0: Dec 2011
www.aosmd.com
Page 4 of 5
AOWF8N50
Gate Charge Test Circuit & Waveform
Vgs
Qg
10V
+
+
VDC
-
VDC
DUT
Qgs
Vds
Qgd
-
Vgs
Ig
Charge
Res istive Switching Test Circuit & Waveforms
RL
Vds
Vds
DUT
Vgs
+
VDC
90%
Vdd
-
Rg
10%
Vgs
Vgs
t d(on)
tr
t d(off)
t on
tf
t off
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
L
EAR= 1/2 LI
Vds
2
AR
BVDSS
Vds
Id
+
Vgs
Vgs
VDC
-
Rg
Vdd
I AR
Id
DUT
Vgs
Vgs
Diode Recovery Tes t Circuit & Waveforms
Qrr = - Idt
Vds +
DUT
Vgs
Vds -
Isd
Vgs
Ig
Rev0: Dec 2011
L
Isd
+ Vdd
trr
dI/dt
IRM
Vdd
VDC
-
IF
Vds
www.aosmd.com
Page 5 of 5
Similar pages