30 MICALD Micromodul™ connectors, pitch 1.27 mm Micromodul™ solder-in connector, insulation displacement technology (IDT), solder contacts dual row parallel State: Active Approvals: EN EC 1 of 3 EN EC 01/2018 30 MICALD Environmental conditions Temperature range -40 °C/+120 °C 1 1 upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card Materials Insulating body Contact spring PBT, V-0 according to UL94 CuSn, tin-plated Connectable conductors for IDT area Construction Section min. Section max. Insulation diameter Approved cables flat cable 1.27 mm AWG 28 (0,080 mm²) AWG 26 (0,140 mm²) 1,0 mm at www.lumberg.com � Electrical data (at Tamb 20 °C) Contact resistance Rated current Rated voltage ≤ 10 mΩ 1,2 A 32 V AC (250 V AC ohne Berücksichtigung der Kriech- und Luftstrecken nach IEC 60664/DIN EN 60664) IIIa (IEC)/3 (UL) (CTI ≥ 175) 0,54 mm 0,54 mm > 1 GΩ Material group Creepage distance Clearance Insulation resistance *a *b *c *d marking: number of poles terminated connector flat cable printed circuit board layout, solder side view 2 of 3 Associated products Harnessing equipment � HZ-M30 � VARICON 1000 � KHP30 � PP30 01/2018 30 MICALD Designation Pole Number PU (Pieces) MDQ (Pieces) Dimensions A (mm) B (mm) MICALD 04 4 250 1000 7.59 3.81 MICALD 06 6 250 1000 10.13 6.35 MICALD 08 8 250 1000 12.67 8.89 MICALD 10 10 250 1000 15.21 11.43 MICALD 12 12 250 1000 17.75 13.97 MICALD 14 14 250 1000 20.29 16.51 MICALD 16 16 250 500 22.83 19.05 MICALD 18 18 250 500 25.37 21.59 MICALD 20 20 250 500 27.91 24.13 MICALD 26 26 250 500 35.53 31.75 Packaging: in bulk, in a cardboard box – in bar stock carriers upon request 3 of 3 01/2018