CD43__60 TM POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 7 6 3 2 "T" K 1 4 5 B J "U" THREAD "S" FASTON TAB L R D M P 4 1 5 7 6 2 ~ Q CD43__60 Dual SCR Isolated TM POW-R-BLOK Module 60 Amperes / Up to 1600 Volts N 3 - + Features: TElectrically Isolated Heatsinking TDBC Alumina (Al2O3) Insulator T Glass Passivated Chips T DBC Alumina (Al2O3) Baseplate T Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) CONNECTION DIAGRAM Benefits: Ordering Information: CD43 Outline Dimensions Dimension Inches Millimeters A 3.62 92 B 0.81 20.5 C 3.15 80 D 1.18 30 F 0.59 15 G 0.79 20 H 0.79 20 J 0.16 4 K 0.23 5.8 L 0.61 15.5 M 1.14 29 N 0.24 6.1 P 0.94 24 Q 1.18 30 R 0.71 18 S 0.11 x .03 2.8 x 0.8 T 0.25 6.3 U M5 M5 Select the complete eight digit module part number from the table below. Example: CD431660 is a 1600Volt, 60 Ampere Dual SCR Isolated TM POW-R-BLOK Module Type CD43 Voltage Volts (x100) Current Amperes (x 1) 08 12 16 60 TNo Additional Insulation Components Required TEasy Installation TNo Clamping Components Required T Reduce Engineering Time Applications: TBridge Circuits TAC & DC Motor Drives TBattery Supplies TPower Supplies TLarge IGBT Circuit Front Ends TLighting Control THeat & Temperature Control TWelders Note: Dimensions are for reference only Revision Date: 11/1/2001 CD43__60 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 TM POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180° Conduction, TC=95°C IT(RMS) 95 180° Conduction, TC=95°C (AC Switch) IT(RMS) 135 A 180° Conduction, TC=95°C IT(AV) 60 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1,470 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 1,740 A 60 Hz, No VRRM reapplied, Tj=25°C ITSM 1,940 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1,400 A 50 Hz, No VRRM reapplied, Tj=125°C ITSM 1,665 A 50 Hz, No VRRM reapplied, Tj=25°C ITSM 1,850 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1,120 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1,080 A 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 900 A ITSM 870 2 A 2 8.3 ms, 100% VRRM reapplied, Tj=125°C It 8,960 A sec 8.3 ms, No VRRM reapplied, Tj=125°C It 2 12,560 A sec 8.3 ms, No VRRM reapplied, Tj=25°C It 2 15,600 A sec 10 ms, 100% VRRM reapplied, Tj=125°C It 2 9,800 A sec 10 ms, No VRRM reapplied, Tj=125°C It 2 13,860 A sec It 2 17,110 A sec Tj=25°C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5µs, tp > 6µs di/dt 150 A/µs Peak Gate Power Dissipation Tp < 5 ms, Tj = 125°C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125°C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125°C IGFM 3 A Tp < 5 ms, Tj = 125°C VGRM 10 V Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +125 °C 25 3 44 5 83 in.-Lb. Nm in.-Lb. Nm g 3 oz. 2500 3500 V V 10 ms, No VRRM reapplied, Tj=25°C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Reverse Gate Voltage Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second Vrms Vrms 2 2 2 2 2 Revision Date: 11/1/2001 CD43__60 TM POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Symbol Test Conditions Min. IDRM Up to 1600V, TJ=125°C Max. Units 15 mA IRRM Up to 1600V, TJ=125°C 15 mA V TM / VFM ITM / IFM =235A 1.59 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.82 3.00 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125°C, I = πIT(AV) to ITSM 0.85 2.90 V mΩ Peak On-State Voltage VTM Coefficients, Full Range TJ = 125°C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt A= B= C= D= 0.8127 5.23E-03 2.90E-03 -9.17E-05 dV/dt Linear to 2/3 VDRM Tj=125°C, Gate Open Circuit 500 Turn-Off Time (Typical) t off 40 - 100 Gate Trigger Current IGT TJ = 25°C, IT= 2A Vr = 50V, -dI/dt=10 A/µs Re-Applied dV/dt = 200 V/µs, Linear to 900 V Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current V/µs (Typical) µs 270 mA 150 mA 80 mA Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load 4.0 Volts 2.5 Volts 1.7 Volts Tj=125°C, VD=VDRM 0.25 Volts IGDM Tj=125°C, VD=VDRM 6 mA Holding Current IH VD=6V, Resistive Load, Gate Open 200 mA Latching Current IL VD=6V, Resistive Load 400 mA Thermal Characteristics Characteristics Symbol Max. Units 0.165 0.330 °C/W °C/W Thermal Resistance, Junction to Case DC Operation RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZΘJ-C ZΘJ-C= K1 (1-exp(-t/τ1)) K1 = 2.68 E-3 τ1 = 3.10 E-5 + K2 (1-exp(-t/τ2)) K2 = 9.52 E-3 τ2 = 1.07 E-3 + K3 (1-exp(-t/τ3)) K3 = 1.26 E-1 τ3 = 2.02 E-2 + K4 (1-exp(-t/τ4)) Per Module K4 = 2.01 E-1 τ4 = 1.39 E-1 0.1 °C/W Thermal Resistance, Case to Sink Lubricated RΘC-S Revision Date: 11/1/2001 CD43__60 TM POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) 4 0.40 3.5 0.35 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts ( Tj = 125 °C ) 3 2.5 2 1.5 1 0.30 0.25 0.20 0.15 0.10 0.05 0.5 0.00 0 10 100 0.001 1000 0.01 0.1 100 (Sinusoidal Waveform) (Sinusoidal Waveform) 80 125 180° 90° 60 60° 50 30° 40 30 20 180 0 360 CONDUCTION ANGLE Max. Case Temperature - Tcase -°C 120° 70 Max. Power Dissipation Per SCR - Watts 10 Maximum Allowable Case Temperature Maximum On-State Power Dissipation 10 120 115 180 0 360 CONDUCTION ANGLE 110 105 100 30° 60° 180° 90° 120° 95 0 0 5 10 15 20 25 30 35 40 45 50 55 0 60 5 Average On-State Current - It(av) - Amperes 10 15 20 25 30 35 40 45 50 55 60 Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) (Rectangular Waveform) 120 125 360° 100 120 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per SCR - Watts 1 Time - t - Seconds Instantaneous On-State Current - Itm - Amperes 270° 180° 80 60° 60 90° 120° 30° 15° 40 20 180 0 360 115 180 0 360 CONDUCTION ANGLE 110 105 100 30° 60° 95 90° 120° 360° 180° 90 CONDUCTION ANGLE 270° 85 0 0 10 20 30 40 50 60 70 80 Average On-State Current - It(av) - Amperes 90 100 0 10 20 30 40 50 60 70 80 90 100 Average On-State Current - It(av) - Amperes Revision Date: 11/1/2001