TaNFilm® Precision Flat Pack Networks 8900 Series • Precision absolute and ratio tolerances available • Qualified to MIL-R-83401 /03, /10 and /15 • Qualified to characteristics M, K and H • Custom schematics readily available • Absolute TCR to ±15ppm/°C TaNFilm® resistor networks are designed for use in applications requiring a high degree of reliability, stability, tight tolerance and TCR tracking, and low noise. The sputtering process for resistor formation has been perfected to allow a continuous feed production line under high vacuum conditions, thus, insuring uniformity of properties between networks. Laser trimming makes tight ratios easily achievable. The gold plated copper leads are solid phase welded to a large area of gold conductor pads on the ceramic substrate assuring the most reliable termination and long term stability. The Tantalum Nitride resistor material is passivated for environmental protection insuring excellent performance far superior to military requirements. Our TaNFilm® process enables us to manufacture networks containing different resistance values and still maintain tight tolerances and tracking characteristics. The nature of our photo-etch process makes it readily adaptable to meet each individual customer’s needs. Custom circuit designs and special mechanical configurations can be easily achieved with a modest set up charge while maintaining our high standards of precision and reliability. Electrical Data Schematic A Resistance Range (Ω) Absolute Tolerance Optional Ratio Tolerance Absolute TCR (ppm/°C) Tracking TCR (ppm/°C) 10 - 49.9 F, G, J F, G ±50; ±100; ±300 ±20 50.0 - 199 F, G, J D, F, G ±25; ±50; ±100; ±300 ±10 200 - 999 B, D, F, G, J A, B, D, F, G ±25; ±50; ±100; ±300 ±5 1.0K - 100K B, D, F, G, J T, Q, A, B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5 101K - 200K B, D, F, G, J A, B, D, F, G ±25; ±50; ±100; ±300 ±5 50 - 149 B, D, F, G, J B, D, F, G ±300; ±100 ±50 150 - 499 B, D, F, G, J B, D, F, G ±300; ±100; ±50 ±20 500 - 999 B, D, F, G, J B, D, F, G ±25; ±50; ±100; ±300 ±5 1.0K - 150K B, D, F, G, J B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5 B Element Power (mW) 50 25 General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc 8900 Series Issue April 2009 Sheet 1 of 4 TaNFilm® Precision Flat Pack Networks MIL-PRF-83401 Qualification Data Specification Size MIL-PRF-83401/03 MIL-PRF-83401/15 Schematic 14-Pin MIL-PRF-83401/10 Resistance Range (Ω) Absolute Tolerance (%) Characteristic 20 - 121K F, G, J K, M 100 - 100K B, D, F, G, J H, K, M 100 - 100K B, D, F, G, J H, K, M A, B 16-Pin A, B Package Specification Data (MIL and Commercial) Package Power Voltage Rating Power Derating Schematic 14-pin Temperature Range Substrate Lead Finish Noise -65°C to +125°C 99.6% Alumina Gold Plate (60/40 Sn/Pb available) <-30dB 16-pin A 350 400 B 325 375 _____ 100% from 0°C to 70°C derated linearly to 0% at 125°C √ PxR not to exceed 50V Schematics 14 13 12 11 10 9 14 8 13 12 11 10 9 8 R1 14 13 12 11 10 9 8 14 13 12 11 10 9 8 1 2 3 4 5 6 7 R1 R1 1 2 3 4 5 6 7 R1 1 2 Model 8989 RZ 030, RZ 150 Schematic A 3 4 5 6 Model 8987 RZ 030, RZ 150 Schematic B 7 1 2 3 4 5 Model 8999 RZ 100 Schematic A 6 7 Model 8998 RZ 100 Schematic B © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 8900 Series Issue April 2009 Sheet 2 of 4 TaNFilm® Precision Flat Pack Networks Physical Data 0.075″ Max L 0.825″ Max 0.305″ Max included miniscus # of leads Dimension L 14 0.375″ ± .010″ 16 0.390″ ± .020″ 0.250″ ± .010″ 0.030″ max miniscus typ 0.300″ ± .050″ 0.005″ ± .001″ 0.050″ ± .005″ 0.250″ ± .010″ 0.017″ ± .002″ Environmental Data TaNFilm® Test Data (ΔR%) MIL-PRF-83401 Limits (ΔR%) Test per MIL-PRF-83401 M K H V Max Typical Thermal Shock and Power Conditioning 0.7 0.7 0.5 0.25 0.1 0.02 Low Temperature Operation 0.5 0.25 0.1 0.1 0.1 0.01 Short Term Overload 0.5 0.25 0.1 0.1 0.05 0.01 Terminal Strength 0.25 0.25 0.25 0.1 0.1 0.01 Resistance to Solder Heat 0.25 0.25 0.1 0.2 0.1 0.02 Moisture Resistance 0.5 0.5 0.4 0.25 0.1 0.03 Shock 0.25 0.25 0.25 0.25 0.1 0.03 Vibration 0.25 0.25 0.25 0.1 0.1 0.03 Life 2.0 0.5 0.5 0.1 0.1 0.03 High Temperature Exposure 1.0 0.5 0.2 0.1 0.1 0.03 Low Temperature Storage 0.5 0.25 0.1 0.1 0.1 0.02 25°C Double Load 2.0 0.5 0.5 0.1 0.05 0.03 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 8900 Series Issue April 2009 Sheet 3 of 4 TaNFilm® Precision Flat Pack Networks MIL Screened Ordering Data (MIL-PRF-83401) Commercial Ordering Data Prefix FP 8999 03 1001 B F Prefix Model Specification Sheet 8987 = 14-pin Flat Pack, schematic B, gold terminations 8987SD = 14-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations 8989 = 14-pin Flat Pack, schematic A, gold terminations 8989SD = 14-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations 03 = 14-pin Flat Pack 10 = 16-pin Flat Pack 15 = 14-pin HI REL Flat Pack 8998 = 16-pin Flat Pack, schematic B, gold terminations 8998SD = 16-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations 8999 = 16-pin Flat Pack, schematic A, gold terminations 8999SD = 16-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations M83401 03 K 1001 F A Characteristic M, K, H Resistance Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Resistance Absolute Tolerance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1% Schematic Absolute Tolerance A = Isolated; B = Bussed Schematic J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1% Standard lead termination is gold plate. Contact factory for optional 60/40 Sn/Pb solder dip finish. Optional Ratio Tolerance to R1 F = ±1.0%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05%; Q = ±0.02%; T = ±0.01% Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 8900 Series Issue April 2009 Sheet 3 of 4