FGN Data sheet
Sensing element／Gauge
■Features
Surface mount package
■Ordering Information
ＦＧＮ－６ ０７Ｐ Ｇ ＳＲ
Terminal leads configuration
Surface mount package
Model
Length of the pressure port
6：6mm
Pressure type
Rated Pressure
(PSI)
G：Gauge Pressure
Weight
(grams)
RoHS compliance
0.35
Measurable pressure
range(kPa)
-13.79 to 13.79
FGN-602PGSR
-34.47 to 34.47
FGN-605PGSR
-48.26 to 48.26
FGN-607PGSR
Part number
■Specifications
Model
602PG
605PG
607PG
Recommended operating conditions
Pressure type
Gauge pressure
Rated pressure
13.79
34.47
48.26
Measurable pressure range
-13.79 to 13.79
-34.47 to 34.47
-48.26 to 48.26
Temperature range
0 to 50
Pressure media
Non-corrosive gases only (No liquid)
Excitation current (Constant)
1.5
Absolute maximum rating
Maximum load pressure
Twice of rated pressure
Maximum excitation current
3.0
Operating temperature
0 to 80
Storage temperature
-20 to 100
Operating humidity
30 to 80 (Non dew condition)
Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25deg.C)
Output span voltage
40 to 130 (at 0kPa to rated pressure)
Offset voltage
+/-25 (at 0kPa)
Bridge resistance
4000 to 6000
Response time
2 (for the reference)
Accuracy
TSO*
+/-10
+/-8
TCS*
5.0
2.5
Linearity
+/-0.6
+/-0.3
Pressure hysteresis
+/-1.0
+/-0.7
*TSO : Temperature sensitivity of offset voltage(Temperature range from 0-50 deg.C)
*TCS : Temperature coefficient of output span voltage(Temperature range from 0-50 deg.C)
1
Unit
kPa
kPa
deg.C
mADC
mADC
deg.C
deg.C
%RH
mV
mV
Ω
msec.
%FS/0-50deg.C
%FS/0-50deg.C
%FS
%FS
FGN Data sheet
Sensing element／Gauge
P1= 0 kPa
P2= 1/2 x P3 (kPa)
P3= reted pressure (kPa)
T1= 0 deg.C
T2= 25 deg.C
T3= 50 deg.C
Offset voltage (mV)
Voff = V(P1,T)
Voff(0) = V(P1,T1)
Voff(25) = V(P1,T2)
Voff(50) = V(P1,T3)
Output voltage at full scale (mV)
Vfs = V(P3,T)
Vfs(0) = V(P3,T1)
Vfs(25) = V(P3,T2)
Vfs(50) = V(P3,T3)
Output span voltage (mV)
SV = Vfs - Voff
SV(0) = Vfs(0) - Voff(0)
SV(25) = Vfs(25) - Voff(25)
SV(50) = Vfs(50) - Voff(50)
Temperature sensitivity of offset voltage (%FS)
TSO = {LARGER ONE} / SV(25) x 100
LARGER ONE = larger absolute value which of {Voff(0)-Voff(25)} and {Voff(50)-Voff(25)}
Temperature coefficient of output span voltage (%FS)
TCS = {max[SV(0),SV(25),SV(50)] - min[SV(0),SV(25),SV(50)] } / SV(25) x 100
Linearity (%FS)
NL = {V(P2,T2) - [Voff(25)+Vfs(25)]/2 } / SV(25) x 100
Pressure hysteresis (%FS)
Phys = {Voff’(25) - Voff(25) } / SV(25) x 100
Voff’(25) : Output voltage against P1 after stressing by P3 pressure.
2
FGN Data sheet
Sensing element／Gauge
■Outline dimensions■
FGN
2-φ1.1
■Connection diagram■
3
FGN Data sheet
Sensing element／Gauge
■Output characteristics■
↑Output voltage（mV）
Output span voltage
Offset voltage
-Rated pressure
0kPa
Atomospheric
pressure
Note ;
Rated pressure
→Pressure（kPa）
Please read instruction “Notes” before using the sensor.
Fujikura reserves the right to change specifications without notice.
Please keep the sensors sealed using static shielding bags on storage.The pins of the sensor are plated by Ag.
If the sensors expose to an atmosphere, the pins will be black by sulfuration.
Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress
such as mounting, installation and etc. over longtime using.
4
FGN Data sheet
Sensing element／Gauge
Reflow Soldering process recommendation profile
Package
Surface
Temperature
(Degree C)
230
210
150
Room
Temp.
Time
a
a: Rump up rate
b: Pre-heating
c: Rump up rate
d: Heating
e: Rump down rate
Note ;
b
c
d
e
1 or 2 deg.C/sec.
150 to 180 deg.C,within 60 to120sec.
1 to 2 deg.C/sec.
max.230 deg.C,max.10sec. 210 deg.C,within 30sec.
1 or 2 deg.C/sec.
1 ) Temperature means Surface temperature of the sensor package.
2 ) Reflow process max. 2 times.
3 ) Do not wash the sensor.
4 ) Do not put the solder and flux on the sensor package.
If you have any questions regarding technical issues or specifications, please contact us.
Fujikura Ltd. Sensor Department
5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan
Phone +81-(0)3-5606-1072
E-mail : [email protected]
5