RoHS Single Port RJ45 CONNECTOR ARA502-1122S 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Storage temperature range: -40ºC to +85ºC Electrical Specifications @ 25°C Part Number ARA502-1122S OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio (±2%) RX TX 1CT:1CT 1CT:1CT Cross Talk Hi-Pot (dB Min) 1.0 mA (V) 0.5-10MHz 30MHz 50MHz 100MHz Without Capacitance With Capacitance -50 -30 1500 2250 -40 -35 Electrical Specifications @ 25°C Insertion Loss Part (dB Max) Number 1-100MHz 100-125MHz(10/100/1000) 1-30MHz ARA502-1122S -1.2 -18 -1.0 30-50MHz -16 Return Loss (dB Min) @ Load 100 Ohm 60-80MHz 80-100MHz(10/100/1000) 60MHz -12 -10 -14 CMR (dB Min) 1-100 MHz -30 All specifications subject to change without notice. MECHANICAL 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 1503/02/2015 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR ARA502-1122S SCHEMATICS PCB LAYOUT MATERIALS 1. Shield 0.25mm THICKNESS BRASS C2680 H. PLATING NICKEL 20u’ Min 2. HousingStandard Material: PA66, Glass filled Polyester UL94V-0 Standard Color Black. 3. RJ Terminal- Plastic: FR52, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u"-60u" for all and Sn 100%, and 6u” Gold Plating. 4. Input Terminal: Plastic: PBT, Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze SUS430. Plating: Nickel 40u"-60u" for all and Sn 100%. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 1503/02/2015 www.alliedcomponents.com