3.5x2.8mm SURFACE MOUNT LED LAMP AAD3528PBC/G Features Description zSINGLE COLOR. The Blue source color devices are made with InGaN on zSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER SiC Light Emitting Diode. PROCESS. zAVAILABLE ON TAPE AND REEL. zIDEAL FOR BACKLIGHTING. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA3589 REV NO: V.1 DATE: SEP/05/2001 PAGE: 1 OF 4 Selection Guide Par t No . Dic e AAD3528PBC/G Iv (m c d ) @ 20 m A L en s Ty p e BLUE (InGaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 180 400 60 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Blue λD Dominate Wavelength ∆λ 1/2 Ty p . Max . Un it s Tes t Co n d it io n s 468 nm IF=20mA Blue 475 nm IF=20mA Spectral Line Halfwidth Blue 26 nm IF=20mA C Capacitance Blue 110 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.6 4.3 V IF=20mA IR Reverse Current All 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r B lu e Un it s Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA3589 REV NO: V.1 DATE: SEP/05/2001 PAGE: 2 OF 4 Blue AAD3528PBC/G AAD3528PBC/G SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process." SPEC NO: DSAA3589 REV NO: V.1 DATE: SEP/05/2001 PAGE: 3 OF 4 AAD3528PBC/G Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA3589 REV NO: V.1 DATE: SEP/05/2001 PAGE: 4 OF 4