AZ8P 10 A MINIATURE POWER RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • ER ZETTL CH-24DE Dielectric strength 4000 Vrms Clearance and creepage distance >3.5 mm Tracking index CTI 250 Single coil latching Epoxy sealed 7 Amp switching 10 Amp version (1 Form A only) available UL, CUR file E43203 GENERAL DATA CONTACTS Arrangement SPDT (1 Form C) SPST (1 Form A) 10 A version only Ratings Form A Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 220 VDC* or 300 VAC Form C Max. switched power: 170 W or 1750 VA Max. switched current: 7A Max. switched voltage: 220 VDC* or 300 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory Rated Load Form A Form C 5 ms at nominal coil voltage Recommended coil pulse: 20 ms Reset Time (typical) 6 ms at reset voltage Recommended coil pulse: 20 ms Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 1000 megohms min. at 20°C, 500 VDC, 50% RH Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz, 10 g at 10–50 Hz Shock 10 g operating, 100 g damage Enclosure P.E.T. polyester, UL-94: V0 Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) 1.3 W 20°C (68°F) ambient Max. Immersion Time 30 seconds 138°C (248°F) at nominal coil voltage Weight 8 grams Max. 155°C (311°F) Class F Packing unit in pcs 25 per plastic tube / 400 per carton box Resistance < 100 milliohms initially COIL Power Temperature Rise Set Time (typical) 1 x 105 at 10 A, 250 VAC 1 x 105 at 5 A, 250 VAC 5,000V (at 1.2x50 µs) Silver nickel [1] or silver tin oxide [2] Max. Continuous Dissipation Minimum operations 2 x 107 Insulation Resistance 7 A at 250 VAC, Res., 50k cycles [1] 5 A at 250 VAC, Res., 100k cycles [1] At Pickup Voltage (typical) Life Expectancy Mechanical Electrical Form A Form C Surge Voltage Coil to contact 10 A at 250 VAC, Resistive [2] 10 A at 24 VDC, Resistive [2] Material Temperature AZ8P1-1 700 mW NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-01-12 AZ8P RELAY ORDERING DATA COIL SPECIFICATIONS BISTABLE (LATCHING): 1 COIL Nominal Coil VDC ORDER NUMBER* Set VDC Max. Continuous VDC Reset VDC Max. Reset VDC Coil Resistance Ohm ± 10% 3 2.2 3.0 -0.75 -1.35 8 AZ8P1–1CH–3DE 5 3.7 5.0 -1.25 -2.25 22 AZ8P1–1CH–5DE 6 4.5 6.0 -1.50 -2.70 33 AZ8P1–1CH–6DE 9 6.7 9.0 -2.25 -4.05 74 AZ8P1–1CH–9DE 12 9.0 12.0 -3.00 -5.40 119 AZ8P1–1CH–12DE 18 13.5 18.0 -4.50 -8.10 280 AZ8P1–1CH–18DE 24 18.0 24.0 -6.00 -10.80 475 AZ8P1–1CH–24DE 36 27.0 36.0 -9.00 -16.20 1,050 AZ8P1–1CH–36DE 48 36.0 48.0 -12.00 -21.60 1,750 AZ8P1–1CH–48DE 60 45.0 60.0 -15.00 -27.00 2,750 AZ8P1–1CH–60DE * “1CH” denotes silver nickel contacts. Substitute “1AE” in place of “1CH” for 1 Form A silver tin oxide contacts (10A version only). MECHANICAL DATA PC BOARD LAYOUT ventilation Viewed toward terminals WIRING DIAGRAMS Form A Form C Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-01-12