J roaueti, Dnc. J. c/ TELEPHONE: (973) 376-2922 (212)227-6005 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. MUR1630CT Ultrafast Recovery Rectifier FEATURES • Ultrafast Recovery Time • LOW ron/varo vouage • Low Leakage Current 4 •» • 175°C Operating Junction Temperature • High Temperature Glass Passivated Junction /"*, wi I i. MECHANICAL CHARACTERISTICS • Case: Epoxy, Molded • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260 °C Max. for 10 Seconds i —o TQ-22QC package 1 2 :•• c- Mi APPLICATIONS • Designed for use in switching power supplies, inverters and as free wheeling diodes. A ABSOLUTE MAXIMUM RATINGS(Ta=25'C) K : 4 fc. l-r i —isoc WLOC*-. IT ' H9Q.D SYMBOL VRRM VRWM VR PARAMETER Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VALUE 300 UNIT V ) ' .H C I * mm Ip(AV) 8 16 A DIN A IFM Peak Repetitive Forward Current (Rated VR, Square Wave,20kHz) Per Diode Leg 16 A C D F IFSM Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60Hz) 100 A -65-175 *C H J K L 0 'C s u Junction Temperature G R Tstg Storage Temperature Range -65-175 *j— j _» J Average Rectified Forward Current Per Leg (Rated VR) Total Device Tj '• G [-- V MlN MAX 15.90 10 10 4.40 0.90 3.60 5.18 2.90 0.46 13.40 1.30 1.10 2.90 2.70 2.50 2.70 1.29 1.31 6.65 6.45 8.66 8.86 15.70 9 ' ifi 4.20 0.70 3.40 4.98 2.70 0.44 13.20 NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors Ultrafast Recovery Rectifier MUR1630CT THERMAL CHARACTERISTICS SYMBOL Rth j-c PARAMETER Thermal Resistance.Junction to Case MAX UNIT 2.0 °c/w ELECTRICAL CHARACTERISTICS(Ta=25"C) (Pulse Test: Pulse Width=300 u s.Duty Cycle<2%) SYMBOL PARAMETER CONDITIONS MAX UNIT 1.68 V VF Maximum Instantaneous Forward Voltage I F =8A IR Maximum Instantaneous Reverse Current VRRM= 300V 3 uA trr Maximum Reverse Recovery Time IF= 0.5A, IR= 1A, lrr= 0.25A 60 ns