Microprocessor Reset Circuits ADM1810 to ADM1813/ADM1815 to ADM1818 FEATURES VCC RST VCC TOLERANCE BIAS 150ms DELAY GND GENERAL DESCRIPTION ADM1811/ADM1816 5.5kΩ RST VCC TOLERANCE BIAS 150ms DELAY GND VCC The ADM181x range of voltage monitoring circuits is used in any application where an electronic system needs to be reset when a voltage increases above or below a predetermined value. Because of the reset delay time incorporated into the ADM181x series, these devices provide a safe startup for electronic systems. Before a system initializes, the power supply must stabilize. Using the ADM181x series ensures that there are typically 150 ms for the power supply to stabilize before the system resets and safe system initialization begins. TC REFERENCE VCC APPLICATIONS Microprocessor systems Computers Controllers Intelligent instruments Automotive systems ADM1810/ADM1815 TC REFERENCE ADM1812/ADM1817 RST VCC TOLERANCE BIAS 150ms DELAY GND TC REFERENCE ADM1813/ADM1818 VCC RESET MONITOR The ADM181x series of microprocessor reset circuits are available in low cost, space-saving SOT-23 and SC70 packages. VCC TOLERANCE BIAS GND 5.5kΩ RST 150ms DELAY TC REFERENCE 00064-001 Reliable low cost voltage monitor with reset output Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power supply voltages Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical Active high and low push-pull output choices: ADM1810, ADM1812, ADM1815, and ADM1817 Open-drain output choices: ADM1811, ADM1813, ADM1816, and ADM1818 Can be used with a manual push-button to generate a reset: ADM1813, ADM1818 Initialization of microprocessor systems with added safety Available in 3-lead SOT-23 and SC70 packages FUNCTIONAL BLOCK DIAGRAMS Figure 1. Rev. E Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©1999–2008 Analog Devices, Inc. All rights reserved. ADM1810 to ADM1813/ADM1815 to ADM1818 TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................6 Applications ....................................................................................... 1 Theory of Operation ...........................................................................7 General Description ......................................................................... 1 Timing Diagrams for All Devices ...............................................7 Functional Block Diagrams ............................................................. 1 ADM1813 and ADM1818..............................................................7 Revision History ............................................................................... 2 ADM1810, ADM1812, ADM1815, and ADM1817 .....................7 Specifications..................................................................................... 3 ADM1811 and ADM1816..............................................................7 Absolute Maximum Ratings............................................................ 4 Outline Dimensions ..........................................................................8 ESD Caution .................................................................................. 4 Ordering Guide .............................................................................9 Pin Configurations and Function Descriptions ........................... 5 REVISION HISTORY 8/08—Rev. D to Rev. E 2/03—Rev. A to Rev. B. Changes to Table 3 ............................................................................ 5 Updated Outline Dimensions ......................................................... 8 Changes to Ordering Guide ............................................................ 9 Edits to Features.................................................................................1 Deleted Table I ...................................................................................1 Edits to Specifications .......................................................................2 Edits to Absolute Maximum Ratings ..............................................3 Edits to Ordering Guide ...................................................................3 Added Typical Performance Characteristics .................................4 Edits to ADM1813 AND ADM1818 section .................................5 Edits to ADM1810, ADM1812, ADM1815, and ADM1817 Section .............................................................................5 Edits to ADM1811 and ADM1816 Section ...................................5 Updated Outline Dimensions ..........................................................6 3/02—Rev. 0 to Rev. A. Addition of Table ..............................................................................1 Edits to Ordering Guide ...................................................................3 Addition of New Text to ADM1813 and ADM1818 Section ......4 10/05—Rev. C to Rev. D Updated Format .................................................................. Universal Added Figure 3 .................................................................................. 5 Changes to Table 3 ............................................................................ 5 Updated Outline Dimensions ......................................................... 8 Editsto Ordering Guide ................................................................... 9 9/03—Rev. B to Rev. C. Added SC70 ......................................................................... Universal Edits to Specifications ...................................................................... 2 Edits to Ordering Guide .................................................................. 4 Updated Outline Dimensions ......................................................... 7 4/99—Rev.0: Initial Version Rev. E | Page 2 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 SPECIFICATIONS VCC = full operating range, TA = −40°C to +105°C, unless otherwise noted. Table 1. Parameter SUPPLY Voltage Min Typ Max Unit Comments 9 4 5.5 5.5 16 10 V V μA μA TA = 0°C to 105°C TA = −40°C to +105°C VCC = 5.5 V, VCC > VTH, no load VCC = 3.6 V, VCC > VTH, no load VCC ≥ VTH (max), reset not asserted (ADM1810/ADM1815) VCC ≤ VTH (min), reset asserted (ADM1812/ADM1817) VCC ≥ 2.7 V, reset asserted, VOUT = 0.4 V (ADM1810/ADM1811/ADM1813/ADM1815/ADM1816/ ADM1818) VCC ≥ 2.7 V, reset not asserted, VOUT = 0.4 V (ADM1812/ADM1817) ADM1810/ADM1812/ADM1815/ADM1817 @ 0 μA to 500 μA 1 1.2 Current OUTPUT CURRENT RST Output Source Current RST Output Source Current RST Output Sink Current 8 μA μA mA RST Output Sink Current 8 mA OUTPUT VOLTAGE VCC TRIP POINT ADM1810-5, ADM1811-5, ADM1812-5, ADM1813-5 ADM1810-10, ADM1811-10, ADM1812-10, ADM1813-10 ADM1815-5, ADM1816-5, ADM1817-5, ADM1818-5 ADM1815-10, ADM1816-10, ADM1817-10, ADM1818-10 ADM1815-20, ADM1816-20, ADM1817-20, ADM1818-20 ADM1815-R23, ADM1816-R23, ADM1817-R23, ADM1818-R23 ADM1815-R22, ADM1816-R22, ADM1817-R22, ADM1818-R22 INTERNAL PULL-UP RESISTOR ADM1811/ADM1816 ADM1813/ADM1818 OUTPUT CAPACITANCE RESET ACTIVE TIME VCC DETECT TO RESET Falling Rising PUSH-BUTTON DETECT TO RST PUSH-BUTTON RESET 350 350 VCC − 0.5 VCC − 0.1 4.50 4.62 4.75 V 4.25 4.35 4.49 V 2.98 3.06 3.15 V 2.80 2.88 2.97 V 2.47 2.55 2.64 V 2.25 2.31 2.37 V 2.12 2.18 2.25 V 3.5 3.1 5.5 5.5 100 150 7.5 7.5 10 250 kΩ kΩ pF ms 10 150 250 μs ms μs tR = 5 μs (ADM1813/ADM1818) 150 250 ms (ADM1813/ADM1818) 100 1 100 V Rev. E | Page 3 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 2. Parameter VCC Input Current Operating Temperature Range Storage Temperature Range θJA Thermal Impedance, SOT-23 θJA Thermal Impedance, SC70 Lead Temperature (Soldering, 10 sec) Vapor Phase (60 sec) Infrared (15 sec) Rating −0.3 V to +6.0 V 20 mA −40°C to +105°C −65°C to +150°C 270°C/W 146°C/W 300°C 215°C 220°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. E | Page 4 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VCC 1 RST/RST 1 3 GND TOP VIEW (Not to Scale) VCC 2 RST/RST 2 Figure 2. 3-Lead SOT-23 Pin Configuration 00064-014 ADM181x 3 GND TOP VIEW (Not to Scale) 00064-002 ADM181x Figure 3. 3-Lead SC70 Pin Configuration Table 3. Pin Function Descriptions Pin No. SOT-23 SC70 1 2 Mnemonic RST RST 2 3 1 3 VCC GND Function Active High Reset Output. RST remains high while VCC is below the reset threshold and remains high for 150 ms typical after VCC rises above the reset threshold. Applies to the ADM1812 and ADM1817 only. Active Low Reset Output. RST remains low while VCC is below the reset threshold and remains low for 150 ms typical after VCC rises above the reset threshold. Applies to the ADM1810, ADM1811, ADM1813, ADM1815, ADM1816, and ADM1818 only. Supply Voltage. The supply voltage being monitored. Ground. 0 V ground reference for all signals. Rev. E | Page 5 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 TYPICAL PERFORMANCE CHARACTERISTICS 10 1.011 1.009 NORMALIZED RESET THRESHOLD ICC @VCC = 5.5V 8 ICC @VCC = 3V 4 2 –20 0 20 30 50 70 85 TEMPERATURE (°C) 100 DEVIATION (RISE) 1.003 DEVIATION (FALL) 1.001 0.999 0.997 00064-003 0 –40 1.005 0.995 –40 120 Figure 4. Supply Current vs. Temperature 00064-006 ICC (μA) 6 1.007 –20 0 20 30 50 70 85 TEMPERATURE (°C) 100 120 Figure 7. Normalized Reset Threshold vs. Temperature 900 60 50 MAXIMUM TRANSIENT (μs) 700 600 500 VOD = 20mV 400 300 VOD = 125mV 200 30 20 VOD = 200mV 0 –40 –20 0 20 30 50 70 85 TEMPERATURE (°C) 100 0 10 120 Figure 5. Power-Down Reset Delay vs. Temperature 370 360 350 340 330 320 00064-005 310 290 –40 –20 0 20 30 50 70 85 TEMPERATURE (°C) 100 30 40 60 80 100 200 400 VTH – VCC (mV) 600 800 1000 Figure 8. Maximum Transient Duration Without Causing a Reset Pulse vs. Reset Comparator Overdrive 380 300 00064-007 100 POWER-UP RESET TIMEOUT (ms) 40 10 00064-004 POWER-DOWN RESET DELAY (μs) 800 120 Figure 6. Power-Up Reset Timeout vs. Temperature Rev. E | Page 6 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 THEORY OF OPERATION PUSH-BUTTON TIME TIMING DIAGRAMS FOR ALL DEVICES RESET TIMEOUT The following two timing diagrams are valid for ADM1810, ADM1811, ADM1812, ADM1813, ADM1815, ADM1816, ADM1817, and ADM1818. VOLTAGE INPUT LOW VCC Figure 12. Push-Button Reset Timing Diagram VCC TRIP POINT (MAX) VCC TRIP POINT The ADM1818 range has 2.88 V and 2.55 V (typical) trip point options that allow the user to monitor 3.3 V and 3 V supplies. For 5 V monitoring requirements, the ADM1813 range has 4.62 V and 4.35 V (typical) trip point options. VCC TRIP POINT (MIN) VCC TO RESET DELAY ADM1810, ADM1812, ADM1815, AND ADM1817 00064-008 RST 00064-011 VOLTAGE INPUT HIGH VOL The ADM1812 is a 5 V supply monitor with an active high pushpull output and trip point options of 4.62 V and 4.35 V typical. The ADM1810 is similar to the ADM1812, except that the ADM1810 has an active low push-pull output stage. The ADM1817 is suitable for monitoring 3.3 V, 3 V, and 2.5 V supplies, with an active high push-pull output and trip point options of 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical. The ADM1815 is similar to the ADM1817, except that the ADM1815 has an active low push-pull output stage. Figure 9. Power-Down Timing Diagram VCC TRIP POINT (MAX) VCC TRIP POINT VCC TRIP POINT (MIN) VCC RESET ACTIVE TIMEOUT 00064-009 The ADM1810/ADM1812/ADM1815/ADM1817 can connect directly to most microprocessor reset inputs without the need for external components. RST VCC Figure 10. Power-Up Timing Diagram ADM1810/ ADM1812/ ADM1815/ ADM1817 ADM1813 AND ADM1818 The ADM1813 and ADM1818 are low cost voltage monitoring devices featuring an open-drain output and optional push-button reset function. MICROPROCESSOR VCC RST/RST RESET 00064-012 GND VCC ADM1813/ ADM1818 VCC RST MICROPROCESSOR Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application RESET ADM1811 AND ADM1816 The ADM1811 is a 5 V supply monitor with an active low opendrain output and trip point options of 4.62 V and 4.35 V typical. The ADM1816 also has an active low open-drain output but is suitable for monitoring lower voltage supplies of 3.3 V, 3 V, and 2.5 V. 00064-010 GND Figure 11. ADM1813/ADM1818 Typical Application An optional push-button reset switch can be connected between RST and ground. Pressing this switch pulls the reset output low. If the push-button reset button pulls the RST output low for a period greater than 1 μs when the reset button releases the RST line to float high, then the RST line stays low for another 150 ms typical. VCC ADM1811/ ADM1816 MICROPROCESSOR VCC RST RESET 00064-013 GND Figure 14. ADM1811/ADM1816 Typical Application Rev. E | Page 7 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 OUTLINE DIMENSIONS 3.04 2.80 1.40 1.20 3 2.64 2.10 1 2 0.60 0.45 1.03 0.89 2.05 1.78 1.12 0.89 0.100 0.013 0.180 0.085 0.51 0.37 0.55 REF 092707-A SEATING PLANE COMPLIANT TO JEDEC STANDARDS TO-236-AB Figure 15. 3-Lead Small Outline Transistor Package [SOT-23] (RT-3) Dimensions shown in millimeters 2.20 2.00 1.80 1.35 1.25 1.15 3 1 2 2.40 2.10 1.80 PIN 1 0.65 BSC 0.10 MAX 0.40 0.25 0.10 COPLANARITY SEATING PLANE 0.40 0.10 0.26 0.10 0.30 0.20 0.10 ALL DIMENSIONS COMPLIANT WITH EIAJ SC70 Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-3) Dimensions shown in millimeters Rev. E | Page 8 of 16 111505-0 1.10 0.80 1.00 0.80 ADM1810 to ADM1813/ADM1815 to ADM1818 ORDERING GUIDE Model 1 ADM1810-5AKS-REEL ADM1810-5AKS-RL7 ADM1810-5AKSZ-REEL 2 ADM1810-5AKSZ-RL72 ADM1810-5ART-REEL ADM1810-5ART-REEL7 ADM1810-5ARTZ-REEL2 ADM1810-5ARTZ-RL72 ADM1810-10AKS-REEL ADM1810-10AKS-RL7 ADM1810-10AKSZ-RL2 ADM1810-10AKSZ-RL72 ADM1810-10ART-REEL ADM1810-10ART-RL7 ADM1810-10ARTZ-RL2 ADM1810-10ARTZ-RL72 ADM1811-5AKS-REEL ADM1811-5AKS-RL7 ADM1811-5AKSZ-REEL2 ADM1811-5AKSZ-RL72 ADM1811-5ART-REEL ADM1811-5ART-REEL7 ADM1811-5ARTZ-REEL2 ADM1811-5ARTZ-RL72 ADM1811-10AKS-REEL ADM1811-10AKS-RL7 ADM1811-10AKSZ-RL2 ADM1811-10AKSZ-RL72 ADM1811-10ART-REEL ADM1811-10ART-RL7 ADM1811-10ARTZ-RL2 ADM1811-10ARTZ-RL72 ADM1812-5AKS-REEL ADM1812-5AKS-RL7 ADM1812-5AKSZ-REEL2 ADM1812-5AKSZ-RL72 ADM1812-5ART-REEL ADM1812-5ART-REEL7 ADM1812-5ARTZ-REEL2 ADM1812-5ARTZ-RL72 ADM1812-10AKS-REEL ADM1812-10AKS-RL7 ADM1812-10AKSZ-RL2 ADM1812-10AKSZ-RL72 ADM1812-10ART-REEL ADM1812-10ART-RL7 ADM1812-10ARTZ-RL2 ADM1812-10ARTZ-RL72 Temperature Range −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C Trip Point 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V Rev. E | Page 9 of 16 Package Option KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) Branding MZV MZV M4Y M4Y MZV MZV M4Y M4Y MZT MZT M4Z M4Z MZT MZT M4Z M4Z M1V M1V M6Z M6Z M1V M1V M6Z M6Z M1T M1T M70 M70 M1T M1T M70 M70 MTV MTV M72 M72 MTV MTV M72 M72 MTT MTT M71 M71 MTT MTT M71 M71 ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1 ADM1813-5AKS-REEL ADM1813-5AKS-RL7 ADM1813-5AKSZ-REEL2 ADM1813-5AKSZ-RL72 ADM1813-5ART-RL ADM1813-5ART-RL7 ADM1813-5ARTZ-RL2 ADM1813-5ARTZ-RL72 ADM1813-10AKS-REEL ADM1813-10AKS-RL7 ADM1813-10AKSZ-RL2 ADM1813-10AKSZ-RL72 ADM1813-10ART-REEL ADM1813-10ART-RL7 ADM1813-10ARTZ-RL2 ADM1813-10ARTZ-RL72 ADM1815-5AKS-REEL ADM1815-5AKS-RL7 ADM1815-5AKSZ-REEL2 ADM1815-5AKSZ-RL72 ADM1815-5ART-REEL ADM1815-5ART-REEL7 ADM1815-5ARTZ-REEL2 ADM1815-5ARTZ-RL72 ADM1815-10AKS-REEL ADM1815-10AKS-RL7 ADM1815-10AKSZ-RL2 ADM1815-10AKSZ-RL72 ADM1815-10ART-REEL ADM1815-10ART-RL7 ADM1815-10ARTZ-RL2 ADM1815-10ARTZ-RL72 ADM1815-20AKS-REEL ADM1815-20AKS-RL7 ADM1815-20AKSZ-RL2 ADM1815-20AKSZ-RL72 ADM1815-20ART-RL ADM1815-20ART-RL7 ADM1815-20ARTZ-RL2 ADM1815-20ARTZ-RL72 ADM1815-R22AKS-RL ADM1815-R22AKS-RL7 ADM1815-R22AKSZ-RL2 ADM1815-R22AKSZ-R72 ADM1815-R22ART-RL ADM1815-R22ART-RL7 ADM1815-R22ARTZ-RL2 ADM1815-R22ARTZ-R72 ADM1815-R23AKS-RL ADM1815-R23AKS-RL7 ADM1815-R23AKSZ-RL2 ADM1815-R23AKSZ-R72 Temperature Range −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C Trip Point 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V Rev. E | Page 10 of 16 Package Option KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) Branding M3V M3V M6X M6X M3V M3V M6X M6X M3T M3T M6Y M6Y M3T M3T M6Y M6Y M5K M5K M73 M73 M5K M5K M73 M73 M5E M5E M4F M4F M5E M5E M4F M4F M5A M5A M76 M76 M5A M5A M76 M76 M5B M5B M74 M74 M5B M5B M74 M74 M5C M5C M75 M75 ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1 ADM1815-R23ART-RL ADM1815-R23ART-RL7 ADM1815-R23ARTZ-RL2 ADM1815-R23ARTZ-R72 ADM1816-5AKS-REEL ADM1816-5AKS-REEL7 ADM1816-5AKSZ-REEL2 ADM1816-5AKSZ-RL72 ADM1816-5ART-REEL ADM1816-5ART-REEL7 ADM1816-5ARTZ-REEL2 ADM1816-5ARTZ-RL72 ADM1816-10AKS-REEL ADM1816-10AKS-RL7 ADM1816-10AKSZ-RL2 ADM1816-10AKSZ-RL72 ADM1816-10ART-REEL ADM1816-10ART-RL7 ADM1816-10ARTZ-RL2 ADM1816-10ARTZ-RL72 ADM1816-20AKS-REEL ADM1816-20AKS-RL7 ADM1816-20AKSZ-RL2 ADM1816-20AKSZ-RL72 ADM1816-20ART-REEL ADM1816-20ART-RL7 ADM1816-20ARTZ-RL2 ADM1816-20ARTZ-RL72 ADM1816-R22AKS-RL ADM1816-R22AKS-RL7 ADM1816-R22AKSZ-RL2 ADM1816-R22AKSZ-R72 ADM1816-R22ART-RL ADM1816-R22ART-RL7 ADM1816-R22ARTZ-RL2 ADM1816-R22ARTZ-R72 ADM1816-R23AKS-RL ADM1816-R23AKS-RL7 ADM1816-R23AKSZ-RL2 ADM1816-R23AKSZ-R72 ADM1816-R23ART-RL ADM1816-R23ART-RL7 ADM1816-R23ARTZ-RL2 ADM1816-R23ARTZ-R72 ADM1817-5AKS-REEL ADM1817-5AKS-REEL7 ADM1817-5AKSZ-REEL2 ADM1817-5AKSZ-RL72 ADM1817-5ART-REEL ADM1817-5ART-REEL7 ADM1817-5ARTZ-REEL2 ADM1817-5ARTZ-RL72 Temperature Range −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C Trip Point 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V Rev. E | Page 11 of 16 Package Option RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) Branding M5C M5C M75 M75 M6K M6K M77 M77 M6K M6K M77 M77 M6E M6E M54 M54 M6E M6E M54 M54 M6A M6A M6H M6H M6A M6A M6H M6H M6B M6B M78 M78 M6B M6B M78 M78 M6C M6C M79 M79 M6C M6C M79 M79 M7K M7K M7F M7F M7K M7K M7F M7F ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1 ADM1817-10AKS-REEL ADM1817-10AKS-RL7 ADM1817-10AKSZ-RL2 ADM1817-10AKSZ-RL72 ADM1817-10ART-REEL ADM1817-10ART-RL7 ADM1817-10ARTZ-RL2 ADM1817-10ARTZ-RL72 ADM1817-20AKS-REEL ADM1817-20AKS-RL7 ADM1817-20AKSZ-RL2 ADM1817-20AKSZ-RL72 ADM1817-20ART-REEL ADM1817-20ART-RL7 ADM1817-20ARTZ-RL2 ADM1817-20ARTZ-RL72 ADM1817-R22AKS-RL ADM1817-R22AKS-RL7 ADM1817-R22AKSZ-RL2 ADM1817-R22AKSZ-R72 ADM1817-R22ART-RL ADM1817-R22ART-RL7 ADM1817-R22ARTZ-RL2 ADM1817-R22ARTZ-R72 ADM1817-R23AKS-RL ADM1817-R23AKS-RL7 ADM1817-R23AKSZ-RL2 ADM1817-R23AKSZ-R72 ADM1817-R23ART-RL ADM1817-R23ART-RL7 ADM1817-R23ARTZ-RL2 ADM1817-R23ARTZ-R72 ADM1818-5AKS-REEL ADM1818-5AKS-REEL7 ADM1818-5AKSZ-REEL2 ADM1818-5AKSZ-RL72 ADM1818-5ART-REEL ADM1818-5ART-REEL7 ADM1818-5ARTZ-REEL2 ADM1818-5ARTZ-RL72 ADM1818-10AKS-REEL ADM1818-10AKS-RL7 ADM1818-10AKSZ-RL2 ADM1818-10AKSZ-RL72 ADM1818-10ART-REEL ADM1818-10ART-RL7 ADM1818-10ARTZ-RL72 ADM1818-20AKS-REEL ADM1818-20AKS-RL7 ADM1818-20AKSZ-RL2 ADM1818-20AKSZ-RL72 ADM1818-20ART-REEL Temperature Range −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C Trip Point 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V Rev. E | Page 12 of 16 Package Option KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) Branding M7E M7E M7G M7G M7E M7E M7G M7G M7A M7A M7H M7H M7A M7A M7H M7H M7B M7B M7J M7J M7B M7B M7J M7J M7C M7C M7L M7L M7C M7C M7L M7L M8K M8K M4T M4T M8K M8K M4T M4T M8E M8E M7P M7P M8E M8E M7P M8A M8A M59 M59 M8A ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1 ADM1818-20ART-RL7 ADM1818-20ARTZ-RL2 ADM1818-20ARTZ-RL72 ADM1818-R22AKS-RL ADM1818-R22AKS-RL7 ADM1818-R22AKSZ-RL2 ADM1818-R22AKSZ-R72 ADM1818-R22ART-RL ADM1818-R22ART-RL7 ADM1818-R23AKS-RL ADM1818-R23AKS-RL7 ADM1818-R23AKSZ-RL2 ADM1818-R23AKSZ-R72 ADM1818-R23ART-RL ADM1818-R23ART-RL7 1 2 Temperature Range −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C −40°C to +105°C Trip Point 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V Available only in reels. Z = RoHS Compliant Part. Rev. E | Page 13 of 16 Package Option RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) Branding M8A M59 M59 M8B M8B M7M M7M M8B M8B M8C M8C M7N M7N M8C M8C ADM1810 to ADM1813/ADM1815 to ADM1818 NOTES Rev. E | Page 14 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 NOTES Rev. E | Page 15 of 16 ADM1810 to ADM1813/ADM1815 to ADM1818 NOTES ©1999–2008 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D00064-0-8/08(E) Rev. E | Page 16 of 16