AZ AZ770 SPDT SUBMINIATURE POWER RELAY FEATURES • • • • • • • Small footprint 5 kV dielectric strength, 10 kV surge Class B insulation standard 8 mm creepage and clearance Epoxy sealed version available 5 Amp switching High temperature 105 C and high current 10A version avilable ( UL Pending ) • UL, CUR file E44211, VDE 40006815 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at 5 A 240 VAC Res. Max. switched power: 150 W (SPST-NO) standard 1250 VA (SPST-NO) standard 90 W (SPDT) 750 VA (SPDT) Max. switched current: 5 A AC SPST-NO standard 5 A DC SPST-NO standard 3 A AC/DC SPST-NO sensitive 3 A AC/DC SPDT Max. switched voltage: 150* VDC or 380 VAC Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Surge Voltage Coil to contact 10,000V (at 1.2x50 µ s) *Note: If switching voltage is greater than 30 VDC, special Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 90°C (194°F), standard -40°C (-40°F) to 105°C (221°F), sensitive -40°C (-40°F) to 130°C (266°F) precautions must be taken. Please contact the factory. Rated Load UL, CUR Form A (N.O.) 5 A at 250 VAC, Res., 100k cycles 5 A at 30 VDC, Res., 100k cycles 1/8 HP, 125 / 250 VAC, 100k cycles 3 A at 250 VAC, 0.4 PF., 100k cycles C300 Pilot Duty, 125 / 250 VAC, 100k cycles TV-2, 120 VAC Form C 3 A at 250 VAC, Res. 100k cycles 3 A at 30 VDC, Res, 100k cycles VDE Form A and Form C 5 A at 250 VAC, 100k cycles Material Silver nickel, gold plating available Resistance <100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 253 mW standard 113 mW sensitive Max. Continuous Dissipation 1.25 W at 20°C (68°F) ambient Temperature Rise 41°C (74°F) at nominal coil voltage, standard 22°C (40°F) at nominal coil voltage, sensitive Temperature Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Storage Vibration 0.062" DA at 10–55 Hz Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4.6 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. 130°C (266°F) 10/31/08W AZ AZ770 RELAY ORDERING DATA STANDARD RELAYS – TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 ORDER NUMBER* Max. Continuous VDC 3.9 Coil Resistance 20 ± 10% Form A (SPST) Form C (SPDT) AZ770–1A–3D AZ770–1C–3D 5 3.75 6.5 55 ± 10% AZ770–1A–5D AZ770–1C–5D 6 4.5 7.8 80 ± 10% AZ770–1A–6D AZ770–1C–6D 9 6.75 11.7 180 ± 10% AZ770–1A–9D AZ770–1C–9D 12 9.0 15.6 320 ± 10% AZ770–1A–12D AZ770–1C–12D 18 13.5 23.4 720 ± 10% AZ770–1A–18D AZ770–1C–18D 24 18.0 31.2 1,280 ± 10% AZ770–1A–24D AZ770–1C–24D 48 36.0 62.4 5120 ± 15% AZ770–1A–48D AZ770–1C–48D SENSITIVE RELAYS – TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 ORDER NUMBER* Max. Continuous VDC 5.1 Coil Resistance 45 ± 10% Form A (SPST) AZ770–1A–3DS 5 3.75 8.5 125 ± 10% AZ770–1A–5DS 6 4.5 10.2 180 ± 10% AZ770–1A–6DS 9 6.75 15.3 400 ± 10% AZ770–1A–9DS 12 9.0 20.4 720 ± 10% AZ770–1A–12DS 18 13.5 30.6 1600 ± 10% AZ770–1A–18DS 24 18.0 40.8 2800 ± 10% AZ770–1A–24DS *Add suffix “E” for epoxy sealed version. Add suffix “K” for Type 2 footprint. Add suffix “G” for gold plated contacts. Add “H” after AZ770 for high temperature version ( sensitive only ). Add “T” after AZ770 for high current version ( sensitive only). MECHANICAL DATA .703 Max [17.85] .407 Max [10.35] PCB layout .494 Max [12.55] .60 [15.24] 5-.05 [Ø1.3] .157 [4] .016 [0.4] 2-.012 [0.3] D .02 [0.5] .50 [12.7] 5-.05 [Ø1.3] .25 [6.35] .30 [7.6] .30 [7.6] * .03 [0.8] Type 1 * .157 [4] .06 [1.5] Type 1 Type 2 VIEWED TOWARD TERMINALS .703 Max [17.85] .407 Max [10.35] .1 [2.54] *Not used on Form A version Wiring diagram 3 3 .494 Max [12.55] 2 .157 [4] 3-.012 [0.3] 4 .03 [0.8] Type 2 4 5 2 * * Type 1 .016 [0.4] D .02 [0.5] 5 Type 2 VIEWED TOWARD TERMINALS *Not used on Form A version Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 10/31/08W