Honeywell HOA0973 Transmissive optoschmitt sensor Datasheet

HOA096X/097X
Transmissive Optoschmitt Sensor
FEATURES
• Direct TTL interface
• Accurate position sensing
• Four mounting configurations
• Buffer or inverting logic available
• Choice of detector aperture
• 0.125 in.(3.18 mm) slot width
DESCRIPTION
The HOA096X/097X series consists of an infrared
emitting diode facing an Optoschmitt detector encased
in a black thermoplastic housing. Detector switching
takes place whenever an opaque object passes through
the slot between emitter and detector. The
photodetector consists of a photodiode, amplifier,
voltage regulator, Schmitt trigger and an NPN output
transistor with 10 kì (nominal) pull-up resistor. The
user can choose from available options: (1) detector
aperture size, (2) mounting tab configuration, and (3)
housing material.
The HOA096X series utilizes an IR transmissive
polysulfone housing which features smooth optical
faces without external aperture openings; this feature is
desirable when aperture blockage from airborne
contaminants is a possibility. The HOA097X series
employs an opaque polysulfone housing with aperture
openings for use in applications where maximum
rejection of ambient light is important and in situations in
which maximum position resolution is desired. The
HOA096X/097X series employs plastic molded
components. For additional component information see
SEP8506 and SDP8600.
Housing material is polysulfone. Housings are soluble in
chlorinated hydrocarbons and ketones. Recommended
cleaning agents are methanol and isopropanol.
INFRA-26.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance
3 plc decimals
±0.010(0.25)
2 plc decimals
±0.020(0.51)
Package T
DIM_066a.cdr
Packages N/P/L
PACKAGE N
PACKAGE P
.495(12.57)
.475(12.07)
.737(18.72)
.717(18.21)
.435(11.05)
.415(10.54)
.435(11.05)
.415(10.54)
PACKAGE L
.435(11.05)
.415(10.54)
Device Polarity:
Buffer - Output is LO when optical path is blocked.
Inverter - Output is HI when optical path is blocked.
To specify the complete product characteristics, see
PART NUMBER GUIDE.
.737(18.72)
.717(18.21)
DIM_41b.ds4
356
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
HOA096X/097X
Transmissive Optoschmitt Sensor
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDITIONS
IR EMITTER
DETECTOR
COUPLED CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
SCHEMATIC
(25¡C Free-Air Temperature unless otherwise noted)
Operating Temperature Range
Storage Temperature Range
Soldering Temperature (5 sec)
IR EMITTER
Power Dissipation
Reverse Voltage
Continuous Forward Current
DETECTOR
Supply Voltage
Output Sink Current
Duration of Output
Short to VÙÙ or Ground
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
-40¡C to 70¡C
-40¡C to 85¡C
240¡C
100 mW [À]
3V
50 mA
12 V [Á]
18 mA
1.0 sec.
h
357
HOA096X/097X
Transmissive Optoschmitt Sensor
SCHEMATIC
SWITCHING WAVEFORM FOR BUFFERS
SCH_029.cdr
SWITCHING WAVEFORM FOR
INVERTERS
cir_013.cdr
Fig. 1
IRED Forward Bias Characteristics
gra_073.ds4
Forward current - mA
cir_011.cdr
100
90
80
70
60
50
40
30
20
10
0
Pulsed
condition
TA = 80°C
TA = 25°C
TA = -40°C
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Forward voltage - V
Fig. 2
IRED Trigger Current vs Temperature
gra_098.ds4
•Normalized trigger current
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-75
-50
-25
0
25
50
75
100 125
Ambient temperature - °C
All Performance Curves Show Typical Values
358
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
HOA096X/097X
Transmissive Optoschmitt Sensor
PART NUMBER GUIDE
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
359
Similar pages