STMicroelectronics L7885CV Positive voltage regulator Datasheet

L7800
SERIES
POSITIVE VOLTAGE REGULATORS
■
■
■
■
■
OUTPUT CURRENT TO 1.5A
OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9;
10; 12; 15; 18; 24V
THERMAL OVERLOAD PROTECTION
SHORT CIRCUIT PROTECTION
OUTPUT TRANSITION SOA PROTECTION
DESCRIPTION
The L7800 series of three-terminal positive
regulators is available in TO-220, TO-220FP,
TO-220FM, TO-3 and D2PAK packages and
several fixed output voltages, making it useful in a
wide range of applications. These regulators can
provide local on-card regulation, eliminating the
distribution problems associated with single point
regulation. Each type employs internal current
limiting, thermal shut-down and safe area
protection, making it essentially indestructible. If
adequate heat sinking is provided, they can
deliver over 1A output current. Although designed
primarily as fixed voltage regulators, these
devices can be used with external components to
obtain adjustable voltage and currents.
TO-220
D2PAK
TO-220FP
TO-220FM
TO-3
Figure 1: Schematic Diagram
November 2004
Rev. 12
1/34
L7800 SERIES
Table 1: Absolute Maximum Ratings
Symbol
VI
Parameter
DC Input Voltage
Value
for VO= 5 to 18V
35
for VO= 20, 24V
40
Unit
V
Output Current
Internally Limited
Ptot
Power Dissipation
Internally Limited
Tstg
Storage Temperature Range
-65 to 150
°C
Top
Operating Junction Temperature for L7800
Range
for L7800C
-55 to 150
0 to 150
°C
IO
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is
not implied.
Table 2: Thermal Data
Symbol
Parameter
Rthj-case Thermal Resistance Junction-case Max
Thermal Resistance Junction-ambient
Rthj-amb
Max
Figure 2: Schematic Diagram
2/34
D2PAK
TO-220
3
5
5
62.5
50
60
TO-220FP TO-220FM
TO-3
Unit
5
4
°C/W
60
35
°C/W
L7800 SERIES
Figure 3: Connection Diagram (top view)
TO-220 (Any Type)
TO-220FP/TO-220FM
D2PAK (Any Type)
TO-3
Table 3: Order Codes
TYPE
L7805
L7805C
L7852C
L7806
L7806C
L7808
L7808C
L7885C
L7809C
L7810C
L7812
L7812C
L7815
L7815C
L7818
L7818C
L7820
L7820C
L7824
L7824C
TO-220
(A Type)
TO-220
(C Type)
L7805CV
L7852CV
TO-220
(E Type)
D2PAK
(A Type) (*)
D2PAK
(C Type)
(T & R)
TO-220FP
TO-220FM
L7805C-V L7805CV1 L7805CD2T L7805C-D2TR
L7852CD2T
L7805CP
L7852CP
L7805CF
L7852CF
L7806CV
L7806C-V
L7806CD2T
L7806CP
L7806CF
L7808CV
L7885CV
L7809CV
L7810CV
L7808C-V
L7808CD2T
L7885CD2T
L7809CD2T
L7810CD2T
L7808CP
L7885CP
L7809CP
L7810CP
L7808CF
L7885CF
L7809CF
L7812CV
L7812C-V
L7812CD2T
L7812CP
L7812CF
L7815CV
L7815C-V
L7815CD2T
L7815CP
L7815CF
L7818CV
L7818CD2T
L7818CP
L7818CF
L7820CV
L7820CD2T
L7820CP
L7820CF
L7824CV
L7824CD2T
L7824CP
L7824CF
L7809C-V
TO-3
L7805T
L7805CT
L7852CT
L7806T
L7806CT
L7808T
L7808CT
L7885CT
L7809CT
L7812T
L7812CT
L7815T
L7815CT
L7818T
L7818CT
L7820T
L7820CT
L7824T
L7824CT
(*) Available in Tape & Reel with the suffix "-TR".
3/34
L7800 SERIES
Figure 4: Application Circuits
TEST CIRCUITS
Figure 5: DC Parameter
Figure 6: Load Regulation
4/34
L7800 SERIES
Figure 7: Ripple Rejection
Table 4: Electrical Characteristics Of L7805 (refer to the test circuits, TJ = -55 to 150°C, VI = 10V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 8 to 20 V
∆VO(*)
Line Regulation
VI = 7 to 25 V
TJ = 25°C
VI = 8 to 12 V
TJ = 25°C
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
25
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
PO ≤ 15W
4.8
5
5.2
V
4.65
5
5.35
V
3
50
mV
1
25
VI = 8 to 25 V
∆VO/∆T Output Voltage Drift
eN
SVR
B =10Hz to 100KHz
VI = 8 to 18 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
6
mA
0.5
mA
0.6
Supply Voltage Rejection
mV
0.8
IO = 5 mA
Output Noise Voltage
Unit
TJ = 25°C
f = 120Hz
mV/°C
40
68
TJ = 25°C
dB
2
2.5
17
TJ = 25°C
1.3
µV/VO
V
mΩ
0.75
1.2
A
2.2
3.3
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
5/34
L7800 SERIES
Table 5: Electrical Characteristics Of L7806 (refer to the test circuits, TJ = -55 to 150°C, VI = 11V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 9 to 21 V
∆VO(*)
Line Regulation
VI = 8 to 25 V
VI = 9 to 13 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
5.75
6
6.25
V
5.65
6
6.35
V
TJ = 25°C
60
mV
TJ = 25°C
30
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
30
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 9 to 25 V
0.8
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
0.7
Output Noise Voltage
B =10Hz to 100KHz
Supply Voltage Rejection
VI = 9 to 19 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
TJ = 25°C
f = 120Hz
mV/°C
40
65
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
19
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 6: Electrical Characteristics Of L7808 (refer to the test circuits, TJ = -55 to 150°C, VI = 14V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 11.5 to 23 V
∆VO(*)
Line Regulation
VI = 10.5 to 25 V
VI = 11 to 17 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
7.7
8
8.3
V
7.6
8
8.4
V
TJ = 25°C
80
mV
TJ = 25°C
40
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
40
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 11.5 to 25 V
0.8
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
1
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 11.5 to 21.5 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
62
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
16
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
6/34
L7800 SERIES
Table 7: Electrical Characteristics Of L7812 (refer to the test circuits, TJ = -55 to 150°C, VI = 19V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 15.5 to 27 V
∆VO(*)
Line Regulation
VI = 14.5 to 30 V
VI = 16 to 22 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
11.5
12
12.5
V
11.4
12
12.6
V
TJ = 25°C
120
mV
TJ = 25°C
60
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
60
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 15 to 30 V
0.8
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
1.5
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 15 to 25 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
61
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
18
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 8: Electrical Characteristics Of L7815 (refer to the test circuits, TJ = -55 to 150°C, VI = 23V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 18.5 to 30 V
∆VO(*)
Line Regulation
VI = 17.5 to 30 V
VI = 20 to 26 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
14.4
15
15.6
V
14.25
15
15.75
V
TJ = 25°C
150
mV
TJ = 25°C
75
IO = 5 mA to 1.5 A
TJ = 25°C
150
IO = 250 to 750 mA
TJ = 25°C
75
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 18.5 to 30 V
0.8
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
1.8
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 18.5 to 28.5 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
60
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
19
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
7/34
L7800 SERIES
Table 9: Electrical Characteristics Of L7818 (refer to the test circuits, TJ = -55 to 150°C, VI = 26V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 22 to 33 V
∆VO(*)
Line Regulation
VI = 21 to 33 V
VI = 24 to 30 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
17.3
18
18.7
V
17.1
18
18.9
V
TJ = 25°C
180
mV
TJ = 25°C
90
IO = 5 mA to 1.5 A
TJ = 25°C
180
IO = 250 to 750 mA
TJ = 25°C
90
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 22 to 33 V
0.8
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
2.3
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 22 to 32 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
59
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
22
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 10: Electrical Characteristics Of L7820 (refer to the test circuits, TJ = -55 to 150°C, VI = 28V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
19.2
20
20.8
V
19
20
21
V
mV
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 24 to 35 V
∆VO(*)
Line Regulation
VI = 22.5 to 35 V
TJ = 25°C
200
VI = 26 to 32 V
TJ = 25°C
100
IO = 5 mA to 1.5 A
TJ = 25°C
200
IO = 250 to 750 mA
TJ = 25°C
100
∆VO(*)
Id
∆Id
Load Regulation
SVR
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 24 to 35 V
0.8
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15W
Unit
IO = 5 mA
2.5
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 24 to 35 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
58
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
24
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
8/34
L7800 SERIES
Table 11: Electrical Characteristics Of L7824 (refer to the test circuits, TJ = -55 to 150°C, VI = 33V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 28 to 38 V
∆VO(*)
Line Regulation
VI = 27 to 38 V
VI = 30 to 36 V
IO = 5 mA to 1.5 A
TJ = 25°C
240
IO = 250 to 750 mA
TJ = 25°C
120
∆VO(*)
Id
∆Id
Load Regulation
SVR
23
24
25
V
22.8
24
25.2
V
TJ = 25°C
240
mV
TJ = 25°C
120
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
6
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 28 to 38 V
0.8
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
3
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 28 to 38 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV/°C
40
56
µV/VO
dB
TJ = 25°C
2
2.5
TJ = 25°C
0.75
1.2
A
2.2
3.3
A
28
1.3
V
mΩ
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 12: Electrical Characteristics Of L7805C (refer to the test circuits, TJ = 0 to 125°C, VI = 10V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 7 to 20 V
∆VO(*)
Line Regulation
VI = 7 to 25 V
VI = 8 to 12 V
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
50
∆VO(*)
Id
∆Id
Load Regulation
SVR
4.8
5
5.2
V
4.75
5
5.25
V
TJ = 25°C
3
100
mV
TJ = 25°C
1
50
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 7 to 25 V
0.8
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
Supply Voltage Rejection
VI = 8 to 18 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
TJ = 25°C
f = 120Hz
-1.1
mV/°C
40
µV/VO
62
dB
TJ = 25°C
2
V
17
mΩ
TJ = 25°C
0.75
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
9/34
L7800 SERIES
Table 13: Electrical Characteristics Of L7852C (refer to the test circuits, TJ = 0 to 125°C, VI = 10V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 8 to 20 V
∆VO(*)
Line Regulation
VI = 7 to 25 V
VI = 8 to 12 V
IO = 5 mA to 1.5 A
TJ = 25°C
105
IO = 250 to 750 mA
TJ = 25°C
52
∆VO(*)
Id
∆Id
Load Regulation
SVR
5.0
5.2
5.4
V
4.95
5.2
5.45
V
TJ = 25°C
3
105
mV
TJ = 25°C
1
52
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 7 to 25 V
1.3
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
Supply Voltage Rejection
VI = 8 to 18 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
TJ = 25°C
f = 120Hz
-1
mV/°C
42
µV/VO
61
dB
TJ = 25°C
2
V
17
mΩ
TJ = 25°C
0.75
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 14: Electrical Characteristics Of L7806C (refer to the test circuits, TJ = 0 to 125°C, VI = 11V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
5.75
6
6.25
V
5.7
6
6.3
V
120
mV
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 8 to 21 V
∆VO(*)
Line Regulation
VI = 8 to 25 V
VI = 9 to 13 V
TJ = 25°C
60
∆VO(*)
Load Regulation
IO = 5 mA to 1.5 A
TJ = 25°C
120
IO = 250 to 750 mA
TJ = 25°C
60
Id
∆Id
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
PO ≤ 15W
TJ = 25°C
VI = 8 to 25 V
∆VO/∆T Output Voltage Drift
eN
SVR
B =10Hz to 100KHz
Supply Voltage Rejection
VI = 9 to 19 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
TJ = 25°C
TJ = 25°C
8
mA
0.5
mA
1.3
IO = 5 mA
Output Noise Voltage
mV
TJ = 25°C
f = 120Hz
-0.8
mV/°C
45
µV/VO
59
dB
2
V
19
mΩ
0.55
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
10/34
L7800 SERIES
Table 15: Electrical Characteristics Of L7808C (refer to the test circuits, TJ = 0 to 125°C, VI = 14V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 10.5 to 25 V
∆VO(*)
Line Regulation
VI = 10.5 to 25 V
VI = 11 to 17 V
∆VO(*)
Id
∆Id
Load Regulation
SVR
Typ.
Max.
Unit
7.7
8
8.3
V
7.6
8
8.4
V
TJ = 25°C
160
mV
TJ = 25°C
80
IO = 5 mA to 1.5 A
TJ = 25°C
160
IO = 250 to 750 mA
TJ = 25°C
80
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 10.5 to 25 V
1
∆VO/∆T Output Voltage Drift
eN
Min.
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 11.5 to 21.5 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
-0.8
mV/°C
52
µV/VO
56
dB
TJ = 25°C
2
V
16
mΩ
TJ = 25°C
0.45
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 16: Electrical Characteristics Of L7885C (refer to the test circuits, TJ = 0 to 125°C, VI = 14.5V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 11 to 26 V
∆VO(*)
Line Regulation
VI = 11 to 27 V
VI = 11.5 to 17.5 V
IO = 5 mA to 1.5 A
TJ = 25°C
160
IO = 250 to 750 mA
TJ = 25°C
80
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
8.2
8.5
8.8
V
8.1
8.5
8.9
V
TJ = 25°C
160
mV
TJ = 25°C
80
PO ≤ 15W
VI = 11 to 27 V
∆VO/∆T Output Voltage Drift
eN
SVR
IO = 5 mA
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 12 to 22 V
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV
8
mA
0.5
mA
1
Output Noise Voltage
Vd
Unit
-0.8
mV/°C
55
µV/VO
56
dB
TJ = 25°C
2
V
16
mΩ
TJ = 25°C
0.45
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
11/34
L7800 SERIES
Table 17: Electrical Characteristics Of L7809C (refer to the test circuits, TJ = 0 to 125°C, VI = 15V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 11.5 to 26 V
∆VO(*)
Line Regulation
VI = 11.5 to 26 V
VI = 12 to 18 V
IO = 5 mA to 1.5 A
TJ = 25°C
180
IO = 250 to 750 mA
TJ = 25°C
90
∆VO(*)
Id
∆Id
Load Regulation
SVR
8.64
9
9.36
V
8.55
9
9.45
V
TJ = 25°C
180
mV
TJ = 25°C
90
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 11.5 to 26 V
1
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 12 to 23 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
-1
mV/°C
70
µV/VO
55
dB
TJ = 25°C
2
V
17
mΩ
TJ = 25°C
0.40
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 18: Electrical Characteristics Of L7810C (refer to the test circuits, TJ = 0 to 125°C, VI = 16V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 12.5 to 26 V
∆VO(*)
Line Regulation
VI = 12.5 to 26 V
VI = 13.5 to 19 V
IO = 5 mA to 1.5 A
TJ = 25°C
200
IO = 250 to 750 mA
TJ = 25°C
100
∆VO(*)
Id
∆Id
Load Regulation
SVR
9.6
10
10.4
V
9.5
10
10.5
V
TJ = 25°C
200
mV
TJ = 25°C
100
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 12.5 to 26 V
1
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 13 to 23 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
-1
mV/°C
70
µV/VO
55
dB
TJ = 25°C
2
V
17
mΩ
TJ = 25°C
0.40
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
12/34
L7800 SERIES
Table 19: Electrical Characteristics Of L7812C (refer to the test circuits, TJ = 0 to 125°C, VI = 19V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 14.5 to 27 V
∆VO(*)
Line Regulation
VI = 14.5 to 30 V
VI = 16 to 22 V
IO = 5 mA to 1.5 A
TJ = 25°C
240
IO = 250 to 750 mA
TJ = 25°C
120
∆VO(*)
Id
∆Id
Load Regulation
SVR
11.5
12
12.5
V
11.4
12
12.6
V
TJ = 25°C
240
mV
TJ = 25°C
120
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 14.5 to 30 V
1
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 15 to 25 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
-1
mV/°C
75
µV/VO
55
dB
TJ = 25°C
2
V
18
mΩ
TJ = 25°C
0.35
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 20: Electrical Characteristics Of L7815C (refer to the test circuits, TJ = 0 to 125°C, VI = 23V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 17.5 to 30 V
∆VO(*)
Line Regulation
VI = 17.5 to 30 V
VI = 20 to 26 V
IO = 5 mA to 1.5 A
TJ = 25°C
300
IO = 250 to 750 mA
TJ = 25°C
150
∆VO(*)
Id
∆Id
Load Regulation
SVR
14.5
15
15.6
V
14.25
15
15.75
V
TJ = 25°C
300
mV
TJ = 25°C
150
PO ≤ 15W
mV
Quiescent Current
TJ = 25°C
8
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = 17.5 to 30 V
1
∆VO/∆T Output Voltage Drift
eN
Unit
IO = 5 mA
Output Noise Voltage
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 18.5 to 28.5 V
Vd
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
-1
mV/°C
90
µV/VO
54
dB
TJ = 25°C
2
V
19
mΩ
TJ = 25°C
0.23
A
2.2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
13/34
L7800 SERIES
Table 21: Electrical Characteristics Of L7818C (refer to the test circuits, TJ = 0 to 125°C, VI = 26V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 21 to 33 V
∆VO(*)
Line Regulation
VI = 21 to 33 V
VI = 24 to 30 V
IO = 5 mA to 1.5 A
TJ = 25°C
360
IO = 250 to 750 mA
TJ = 25°C
180
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
17.3
18
18.7
V
17.1
18
18.9
V
TJ = 25°C
360
mV
TJ = 25°C
180
PO ≤ 15W
VI = 21 to 33 V
∆VO/∆T Output Voltage Drift
eN
SVR
IO = 5 mA
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 22 to 32 V
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV
8
mA
0.5
mA
1
Output Noise Voltage
Vd
Unit
-1
mV/°C
110
µV/VO
53
dB
TJ = 25°C
2
V
22
mΩ
TJ = 25°C
0.20
A
2.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Table 22: Electrical Characteristics Of L7820C (refer to the test circuits, TJ = 0 to 125°C, VI = 28V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
19.2
20
20.8
V
19
20
21
V
mV
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 23 to 35 V
∆VO(*)
Line Regulation
VI = 22.5 to 35 V
TJ = 25°C
400
VI = 26 to 32 V
TJ = 25°C
200
IO = 5 mA to 1.5 A
TJ = 25°C
400
IO = 250 to 750 mA
TJ = 25°C
200
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
PO ≤ 15W
VI = 23 to 35 V
∆VO/∆T Output Voltage Drift
eN
SVR
IO = 5 mA
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 24 to 35 V
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV
8
mA
0.5
mA
1
Output Noise Voltage
Vd
Unit
-1
mV/°C
150
µV/VO
52
dB
TJ = 25°C
2
V
24
mΩ
TJ = 25°C
0.18
A
2.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
14/34
L7800 SERIES
Table 23: Electrical Characteristics Of L7824C (refer to the test circuits, TJ = 0 to 125°C, VI = 33V,
IO = 500 mA, CI = 0.33 µF, CO = 0.1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = 5 mA to 1 A
VI = 27 to 38 V
∆VO(*)
Line Regulation
VI = 27 to 38 V
VI = 30 to 36 V
IO = 5 mA to 1.5 A
TJ = 25°C
480
IO = 250 to 750 mA
TJ = 25°C
240
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
23
24
25
V
22.8
24
25.2
V
TJ = 25°C
480
mV
TJ = 25°C
240
PO ≤ 15W
VI = 27 to 38 V
∆VO/∆T Output Voltage Drift
eN
SVR
IO = 5 mA
B =10Hz to 100KHz
TJ = 25°C
f = 120Hz
Supply Voltage Rejection
VI = 28 to 38 V
Dropout Voltage
IO = 1 A
RO
Output Resistance
f = 1 KHz
Isc
Short Circuit Current
VI = 35 V
Iscp
Short Circuit Peak Current
TJ = 25°C
mV
8
mA
0.5
mA
1
Output Noise Voltage
Vd
Unit
-1.5
mV/°C
170
µV/VO
50
dB
TJ = 25°C
2
V
28
mΩ
TJ = 25°C
0.15
A
2.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Figure 8: Dropout Voltage vs Junction
Temperature
Figure 9: Peak Output Current vs Input/output
Differential Voltage
15/34
L7800 SERIES
Figure 10: Supply Voltage Rejection vs
Frequency
Figure 13: Quiescent Current vs Junction
Temperature
Figure 11: Output Voltage vs Junction
Temperature
Figure 14: Load Transient Response
Figure 12: Output Impedance vs Frequency
Figure 15: Line Transient Response
16/34
L7800 SERIES
Figure 16: Quiescent Current vs Input Voltage
Figure 17: Fixed Output Regulator
NOTE:
1. To specify an output voltage, substitute voltage value for "XX".
2. Although no output capacitor is need for stability, it does improve transient response.
3. Required if regulator is locate an appreciable distance from power supply filter.
Figure 18: Current Regulator
Vxx
IO = 
+ Id
R1
17/34
L7800 SERIES
Figure 19: Circuit for Increasing Output Voltage
IR1 ≥ 5 Id
R2
VO = VXX (1+  ) + Id R2
R1
Figure 20: Adjustable Output Regulator (7 to 30V)
Figure 21: 0.5 to 10V Regulator
R4
VO = V xx 
R1
18/34
L7800 SERIES
Figure 22: High Current Voltage Regulator
VBEQ1
R1 = 
IQ1
IREQ - 
βQ1
VBEQ1
IO = IREG + Q1 (IREG )
R1
Figure 23: High Output Current with Short Circuit Protection
VBEQ2
RSC = 
ISC
Figure 24: Tracking Voltage Regulator
19/34
L7800 SERIES
Figure 25: Split Power Supply (± 15V - 1 A)
* Against potential latch-up problems.
Figure 26: Negative Output Voltage Circuit
Figure 27: Switching Regulator
20/34
L7800 SERIES
Figure 28: High Input Voltage Circuit
VIN = VI - (VZ + VBE)
Figure 29: High Input Voltage Circuit
Figure 30: High Output Voltage Regulator
Figure 31: High Input and Output Voltage
VO = VXX + VZ1
21/34
L7800 SERIES
Figure 32: Reducing Power Dissipation with Dropping Resistor
VI(min) - VXX - VDROP(max)
R = 
IO(max) + Id(max)
Figure 33: Remote Shutdown
Figure 34: Power AM Modulator (unity voltage gain, IO ≤ 0.5)
NOTE: The circuit performs well up to 100 KHz.
22/34
L7800 SERIES
Figure 35: Adjustable Output Voltage with Temperature Compensation
R2
VO = VXX (1+ )
+ V BE
R
1
NOTE: Q2 is connected as a diode in order to compensate the variation of the Q1 VBE with the temperature. C allows a slow rise time of the VO.
Figure 36: Light Controllers (VOmin = VXX + VBE)
VO falls when the light goes up
VO rises when the light goes up
Figure 37: Protection against Input Short-Circuit with High Capacitance Loads
Application with high capacitance loads and an output voltage greater than 6 volts need an external diode (see fig. 33) to protect the device
against input short circuit. In this case the input voltage falls rapidly while the output voltage decrease slowly. The capacitance discharges by
means of the Base-Emitter junction of the series pass transistor in the regulator. If the energy is sufficiently high, the transistor may be destroyed. The external diode by-passes the current from the IC to ground.
23/34
L7800 SERIES
TO-3 MECHANICAL DATA
mm.
DIM.
MIN.
A
inch
TYP
MAX.
MIN.
TYP.
11.85
B
0.96
MAX.
0.466
1.05
1.10
0.037
0.041
0.043
C
1.70
0.066
D
8.7
0.342
E
20.0
0.787
G
10.9
0.429
N
16.9
0.665
P
26.2
R
3.88
1.031
4.09
U
0.152
39.5
V
1.555
30.10
1.185
A
P
D
C
O
N
B
V
E
G
U
0.161
R
P003C/C
24/34
L7800 SERIES
TO-220 (A TYPE) MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
A
4.40
4.60
0.173
TYP.
MAX.
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.067
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.600
0.620
E
10.0
10.40
0.393
0.409
e
2.4
2.7
0.094
0.106
e1
4.95
5.15
0.194
0.203
F
1.23
1.32
0.048
0.051
H1
6.2
6.6
0.244
0.260
J1
2.40
2.72
0.094
0.107
L
13.0
14.0
0.511
0.551
L1
3.5
3.93
0.137
0.154
L20
16.4
L30
0.645
28.9
1.138
φP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
0015988/N
25/34
L7800 SERIES
TO-220 (C TYPE) MECHANICAL DATA
DIM.
mm.
MIN.
MAX.
MIN.
A
4.30
4.70
0.169
0.185
b
0.70
0.90
0.028
0.035
b1
1.42
1.62
0.056
0.064
c
0.45
0.60
0.018
D
E
TYP
inch
15.70
9.80
TYP.
0.024
0.618
10.20
0.386
0.402
e
2.54
0.100
e1
5.08
0.200
F
1.25
H1
MAX.
1.39
0.049
6.5
0.055
0.256
J1
2.20
2.60
0.087
0.202
L
12.88
13.28
0.507
0.523
L1
L20
3
15.70
L30
0.118
16.1
0.618
28.9
0.634
1.138
φP
3.50
3.70
0.138
0.146
Q
2.70
2.90
0.106
0.114
0015988/N
26/34
L7800 SERIES
TO-220 (E TYPE) MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
A
4.47
4.67
0.176
TYP.
0.184
b
0.70
0.91
0.028
0.036
b1
1.17
1.37
0.046
0.054
c
0.31
0.53
0.012
0.021
D
14.60
15.70
0.575
0.618
E
9.96
10.36
0.392
0.408
e
2.54
0.100
e1
5.08
0.200
MAX.
F
1.17
1.37
0.046
0.054
H1
6.1
6.8
0.240
0.268
J1
2.52
2.82
0.099
0.111
L
12.70
13.80
0.500
0.543
L1
3.20
3.96
0.126
0.156
L20
15.21
16.77
0.599
0.660
φP
3.73
3.94
0.147
0.155
Q
2.59
2.89
0.102
0.114
7655923/A
27/34
L7800 SERIES
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.50
0.045
0.059
F2
1.15
1.50
0.045
0.059
G
4.95
5.2
0.194
0.204
G1
2.4
2.7
0.094
0.106
H
10.0
10.40
0.393
L2
L3
16
0.409
0.630
28.6
30.6
1.126
1.204
L4
9.8
10.6
0.385
0.417
L5
2.9
3.6
0.114
0.142
L6
15.9
16.4
0.626
0.645
L7
9
9.3
0.354
0.366
DIA.
3
3.2
0.118
0.126
7012510A-H
28/34
L7800 SERIES
TO-220FM MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.50
4.90
0.177
0.193
B
2.34
2.74
0.092
0.108
D
2.56
2.96
0.101
0.117
E
0.45
0.60
0.018
F
0.70
0.90
0.028
0.50
F1
0.020
0.035
1.47
G
0.058
5.08
G1
2.34
H
9.96
L2
2.54
0.024
0.200
2.74
0.092
10.36
0.392
15.8
0.100
0.108
0.408
0.622
L4
9.45
10.05
0.372
0.396
L6
15.67
16.07
0.617
0.633
L7
8.99
9.39
0.354
0.370
L8
DIA.
3.30
3.08
0.130
3.28
0.121
0.129
7012510C-H
29/34
L7800 SERIES
D2PAK (A TYPE) MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
0.03
0.23
0.001
0.009
b
0.7
0.93
0.027
0.036
b2
1.14
1.7
0.044
0.067
c
0.45
0.6
0.017
0.023
c2
1.23
1.36
0.048
0.053
D
8.95
8
9.35
0.352
0.368
E
10
10.4
E1
8.5
D1
e
0.315
0.393
0.409
0.335
2.54
0.100
e1
4.88
5.28
0.192
0.208
H
15
15.85
0.590
0.624
J1
2.49
2.69
0.098
0.106
L
2.29
2.79
0.090
0.110
L1
1.27
1.4
0.050
0.055
L2
1.3
1.75
0.051
0.069
8°
0°
R
V2
0.4
0°
0.016
8°
0079457/J
30/34
L7800 SERIES
D2PAK (C TYPE) MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.3
4.7
0.169
0.185
A1
0
0.20
0.000
0.008
0.035
b
0.70
0.90
0.028
b2
1.17
1.37
0.046
c
0.45
0.50
0.6
0.018
0.020
0.024
c2
1.25
1.30
1.40
0.049
0.051
0.055
9.2
9.4
0.354
0.362
0.370
D
9.0
D1
7.5
E
9.8
E1
7.5
0.054
0.295
10.2
0.386
0.402
0.295
e
2.54
e1
5.08
0.200
H
15
J1
2.20
2.60
0.087
0.102
L
1.79
2.79
0.070
0.110
L1
1.0
1.4
0.039
0.055
L2
1.2
1.6
0.047
0.063
3°
0°
R
V2
15.30
0.100
15.60
0.591
0.3
0°
0.602
0.614
0.012
3°
0079457/J
31/34
L7800 SERIES
Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MIN.
TYP.
180
13.0
13.2
MAX.
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
32/34
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
10.50
10.6
10.70
0.413
0.417
0.421
Bo
15.70
15.80
15.90
0.618
0.622
0.626
Ko
4.80
4.90
5.00
0.189
0.193
0.197
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
11.9
12.0
12.1
0.468
0.472
0.476
L7800 SERIES
Table 24: Revision History
Date
Revision
09-Nov-2004
12
Description of Changes
Add New Part Number.
33/34
L7800 SERIES
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
34/34
Similar pages