DIGITRON SEMICONDUCTORS MBR2535CTL 25A SCHOTTKY RECTIFIER MAXIMUM RATINGS Symbol MBR2535CTL Unit Peak repetitive reverse voltage Working peak reverse voltage DC blocking voltage Rating VRRM VRWM VR 35 30 30 V Average rectified forward current (Rated VR) IF(AV) 12.5 @ TC = 110°C A Peak repetitive forward current (Rated VR, square wave, 20 kHz) IFRM 25 @ TC = 95°C A Peak repetitive reverse surge current (2.0µs, 1.0 kHz) IRRM 1 A Non-repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60Hz) IFSM Operating junction temperature range Storage junction temperature range A 150 TJ -65 to +125 °C Tstg -65 to +150 °C Voltage rate of change (Rated VR) dv/dt 10000 V/µs Controlled avalanche energy Waval 20 mJ Maximum thermal resistance Junction to case RӨJC 2.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Maximum instantaneous forward voltage (IF = 25A, TC = 25°C) (IF = 12.5A, TC = 25°C) (IF = 12.5A, TC = 125°C) Maximum instantaneous reverse current (Rated dc voltage, TC = 25°C) (Rated dc voltage, TC = 125°C) Symbol MBR2535CTL Unit (1) VF 0.55 0.47 0.41 V (1) IR mA 5.0 500 Note 1: Pulse test: Pulse width = 300µs, duty cycle ≤ 2.0%. MECHANICAL CHARACTERISTICS Case TO-220AB Marking Alpha-numeric Pin out See below 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20121205 DIGITRON SEMICONDUCTORS MBR2535CTL 25A SCHOTTKY RECTIFIER Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20121205