APPLIED POWER CONVERSION Division of TECHNOLOGY DYNAMICS INC. NTDM-6HS SERIES 1500W-18,000W N+1 REDUNDANT HOT SWAP POWER SYSTEMS 16.25” x 19” x 17.5” APPLICATIONS The NTDM-6HS Series of Hot Swap Rack Power Supply systems offer (N+1) redundant or high power paralleled outputs of 6 modules per enclosure. This series is especially suitable for critical telecom and wireless systems or where bulk power is required. Modules may be removed while system is active for ease of replacement resulting in no down time. STANDARD FEATURES • MTBF > 150.000 Hours • LED Indicators (Each Module): Output Power Good; Input Power Good • LCD Meters • Tightly Regulated • Equipped with Isolation Diodes for Redundancy/Parallel Operation • Circuit Breaker Input • OV/OL/OT Protection Main Output • Floating Connectors for Hot Swap Insertion • Remote Sensing Post Isolation Diodes • Sturdy Fold Down Handle • Circular Input Connector MS-3102 AVAILABLE OPTIONS • Power Factor Correction • Militarized Version: MIL-STD-810 • Low Voltage Battery Disconnect (LVBD) for Battery Back-Up Operation • Terminal Block Covers • 3 Phase Input • 400 Hz Operation • IEEE Communications Port • Militarized Version: MIL-STD-461 SPECIFICATIONS ELECTRICAL: Input: (1500W) Module 85-132 - 175-265VAC, 47-63 Hz (2000-3000W) Module 220VAC 1Phase or 115/208 3Phase Regulation: Line ± .3% Load ± 2% Ripple: 1% Peak to Peak, Not to Exceed 200mV Efficiency: 80% Typical Hold Up Time: 20ms Min. In Rush Current: 60A max ½ Cycle/Module Protections: OV,OL & OT MECHANICAL & ENVIRONMENTAL Operational Temperature: 0˚C to + 50˚C Standard -40˚C to + 60˚C Optional Storage Temperature: 0˚C to + 85˚C Cooling: Internal DC Fan Weight: Modules (15 lbs) Each, Rack (35 lbs) Size: 17.5”(H) x 19” Std. Rack (W) x 16.25” (L) AS 9100 Design Excellence since 1976! Certificate No: US008267-1 MODEL SELECTION 1500 WATT MODULES 2000 WATT MODULES 3000 WATT MODULES System Model 6 Modules 125 NTDM-6HS-12-750 100 NTDM-6HS-15-600 62 NTDM-6HS-24-372 84A NTDM-6HS-24-504 24V@104A NTDM-6HS-24-624 24V@125A NTDM-6HS-24-750 54 NTDM-6HS-28-324 72A NTDM-6HS-28-432 28V@89A NTDM-6HS-28-534 28V@107A NTDM-6HS-28-642 31 NTDM-6HS-48-186 42A NTDM-6HS-48-252 48V@52A NTDM-6HS-48-312 48V@62A NTDM-6HS-48-372 14 NTDM-6HS-110-84 18A NTDM-6HS-110-108 110V@22A NTDM-6HS-110-132 110V@27A NTDM-6HS-110-162 9000W PARALLEL/7500 REDUNDANT Max. Volts/Amps Per Module 2500 WATT MODULES Max. Volts/Amps Per Module System Model 6 Modules Max. Volts/Amps Per Module System Model 6 Modules Max. Volts/Amps Per Module CONSULT FACTORY CONSULT FACTORY 12.000W PARALLEL/10.000 REDUNDANT System Model 6 Modules CONSULT FACTORY 18.000W PARALLEL/15.000 REDUNDANT 15.000W PARALLEL/12.500 REDUNDANT Note: Model information assumes a fully populated rack (6 modules). SFX. Options Designations -TBC Terminal Block Covers -MIL Ruggedized/Militarized -LVBD Battery Back-Up -PFC Power Factor Correction -3PH 3 Phase Input -IEEE IEEE 488 Port -4HZ 400 Hz Operation -EMI Additional EMI Filtering Low Voltage Battery Disconnect The LVBD module adds a new dimension to battery backup power supplies. The power supply simultaneously charges the battery and powers the load. If the AC power fails, the battery continues to support the load. However, when the battery voltage drops below a predetermined level, the LVBD module disconnects the battery from the load, thereby protecting the battery from the damaging effects of complete discharge. MECHANICAL OUTLINE 43.18mm 1.70" 37.08mm 1.46" VOLTMETER READOUT SELECT B MODULE OUTPUT TM ECHNOLOGY DYNAMICS POWER CONVERSION PRODUCTS 6 PSU REDUNDANT POWER SYSTEM B MADE IN USA 3 4 VOLTMETER 6 7 OUTPUT GOOD INDICATORS AMMETER 5 2 1 POWER PS1 PS2 PS3 PS4 PS5 PS6 ON SYSTEM OUTPUT OUTPUT VOLTAGE MODEL: TDI-10451 OUTPUT CURRENT LED VOLTMETER SELECTOR SWITCH FRONT PANEL AC INPUT SYSTEM OUTPUT (POS.) SYSTEM OUTPUT (NEG.) GPIB INPUT ADDRESS GPIB ADDRESS TECHNOLOGY DYNAMICS, INC. BERGENFIELD, NJ 07621 USA MADE IN USA GPIB CONNECTOR OPTION METAL PLATE THREADED STUD 5/16-18 TYPICAL REAR PANEL INPUT CONNECTOR CA3102R28A16P MATES WITH CA3106R28A16S 460.30mm/18.122" 427.58mm/16.834" 88.65mm 3.490" VOLTMETER READOUT SELECT B MODULE OUTPUT TM ECHNOLOGY DYNAMICS POWER CONVERSION PRODUCTS B 3 6 PSU REDUNDANT POWER SYSTEM 7 TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA 53.34mm 2.10" SIDE VIEW 5 6 MADE IN USA 412.75mm/16.25" 4 2 1 OUTPUT GOOD INDICATORS POWER PS1 PS2 PS3 PS4 PS5 PS6 ON SYSTEM OUTPUT OUTPUT VOLTAGE OUTPUT CURRENT MODEL: TDI-10451 TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA 101.60mm WARNING BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT INPUT GOOD OUTPUT GOOD WARNING BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT INPUT GOOD ADJUSTMENTS O.L. ADJ VOLT ADJ OUTPUT GOOD ADJUSTMENTS O.V. ADJ O.L. ADJ VOLT ADJ O.V. ADJ 443.48mm TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA 165.10mm 443.48mm 17.46" WARNING BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT INPUT GOOD OUTPUT GOOD WARNING BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT INPUT GOOD ADJUSTMENTS O.L. ADJ VOLT ADJ OUTPUT GOOD ADJUSTMENTS O.V. ADJ TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA O.L. ADJ VOLT ADJ O.V. ADJ TECHNOLOGY DYNAMICS INC. 100 SCHOOL ST. BERGENFIELD, NJ 07621 USA SYSTEM OUTPUT (NEG.) 101.60mm AC INPUT SYSTEM OUTPUT (POS.) SYSTEM OUTPUT (NEG.) GPIB INPUT ADDRESS TECHNOLOGY DYNAMICS, INC. BERGENFIELD, NJ 07621 USA MADE IN USA WARNING 427.58mm/16.834" 482.60mm/19.000" 27.51mm 1.083" REAR VIEW BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT OUTPUT GOOD INPUT GOOD WARNING BREAKER MUST BE OFF WHEN PSU IS PLUGGED IN OR OUT INPUT GOOD ADJUSTMENTS 37.59mm O.L. ADJ VOLT ADJ OUTPUT GOOD ADJUSTMENTS O.V. ADJ O.L. ADJ VOLT ADJ O.V. ADJ 421.23mm/16.584" 482.60mm/19.000" FRONT VIEW Rev. A SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TECHNOLOGY DYNAMICS INC. 100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702 www.technologydynamicsinc.com