CAPACITORS ULTRA LOW IMPEDANCE REDUCED SIZE DSHR Very low impedance -55° - 105°C Suited for power supply applications Smaller sizes than DSH R an 6.3 ~ 50Vdc 22 ~ 15000F -55° ~+105°C ±20% (M) 0.01CV, or 3µA, whichever is greater W.V. (Vdc) C ≤ 1,000 C = 2,200 C = 3,300 C = 4,700 C = 6,800 C = 10,000 C = 15,000 Z-40°C/Z+20°C Z-40°C/Z+20°C Capacitance Change SH X Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current After 2 minutes At 20°C ge SPECIFICATION by de d Low Temperature Stability (Impedance Ratio) Load Life Test at Rated W.V 105°C 1,000 Hrs. = 8ø & less 105°C 2,000 Hrs. - 10ø 105°C 3,000 Hrs. = 12.5ø & up D Maximum Tan∂ At 20°C & 120Hz Tan Less than 200% of specified maximum value Leakage Current se 6.3 10 16 25 35 50 0.28 0.24 0.2 0.16 0.14 0.12 0.3 0.26 0.22 0.18 0.16 0.14 0.32 0.28 0.24 0.2 0.18 0.34 0.3 0.26 0.22 0.38 0.34 0.3 0.56 0.42 0.56 3 3 2 2 2 2 6 5 4 4 3 3 Within ±25% of initial measured value Less than specified value pe r RANGE & CASE SIZE DØ x Lmm Cap. (µF) 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10,000 15,000 6.3 10 Su SECTION 1 Up to 3000 hrs life 5x11 6.3x11 6.3x11 8x11.5 10x16 10x20 12.5x20 12.5x25 16x25 16x35.5 6.3x11 6.3x11 8x11.5 10x12.5 10x20 12.5x20 12.5x25 16x25 16x31.5 16 5x11 6.3x11 8x11.5 8x12.5 10x16 12.5x20 12.5x25 16x25 16x31.5 ORDERING INFORMATION 25 35 6.3x11 8x11.5 8x12.5 10x12.5 10x20 12.5x25 16x25 16x31.5 5x11 5x11 6.3x11 8x12.5 10x12.5 10x16 12.5x20 16x25 16x35.5 50 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x25 16x31.5 58 www.dubilier.co.uk DSHR 330 10 /TR Series DSHR Capacitance µF Voltage Options Blank = Loose TA = Tape Ammo TR = Tape Reel TA, TR = 5mm pitch For others add pitch e.g. TA2MM = 2mm pitch CAPACITORS ULTRA LOW IMPEDANCE REDUCED SIZE DSHR MAXIMUM (mA AT 105˚C & 10Hz-200KHz) 0.30 0.24 0.16 0.086 0.047 0.042 0.031 0.026 0.022 25 0.50 0.24 0.16 0.15 0.066 0.042 0.040 0.026 0.022 35 0.30 0.16 0.15 0.086 0.047 0.040 0.026 0.022 0.72 0.50 0.24 0.15 0.086 0.066 0.042 0.026 0.022 W.V. (Vdc /Cap. (µF) 6.3 50 1.40 1.40 0.74 0.46 0.22 0.18 0.11 0.072 0.045 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 0.8 1.0 100≤C≤1000 0.7 0.9 1.0 1000≤C 0.9 0.95 1.0 ed se d 15 min 5 min Su pe r L+1 by 0.55 D 10K≤f 22≤C<100 OUTLINE DRAWING SH RIPPLE CURRENT CORRECTION FACTOR Frequency (Hz) 100≤f≤1K 1K≤f≤10K P Vinyl Sleeve d ø Dø ± 0.5 +0.5 Dimensions in mm Case Size (D) Lead Space (P) Lead Dia (d) 10 50 120 180 130 180 190 180 280 280 320 180 280 280 410 560 520 280 280 410 510 710 670 280 410 560 710 950 820 560 710 950 1150 1460 1200 950 1150 1460 1650 2000 1750 1150 1460 1650 2000 2200 1460 1780 2000 2200 1780 2000 2200 2000 2200 2200 ge 0.50 0.30 0.24 0.15 0.066 0.047 0.042 0.031 0.026 0.022 16 R an 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 10 X W.V. (Vdc /Cap. (µF) 6.3 5 6.3 8 10 12.5 16 18 2 2.5 3.5 5 7.5 0.5 0.6 0.8 59 www.dubilier.co.uk 16 25 35 SECTION 1 PERMISSIBLE RIPPLE CURRENT MAXIMUM E.S.R AT 20˚C & 100 KHz (Ω)