Cirrus CS49330 Part matrix vs. code matrix for avr/outboard decoder-based application Datasheet

CS4932X/CS49330
Part Matrix vs. Code Matrix for AVR/Outboard Decoder-based Applications
1. CS4932X/CS49330: AVR/OUTBOARD
DECODER SUBFAMILY
2. AVR/OUTBOARD DECODER-BASED
STANDARD RELEASE APPLICATION
CODES
For AVR codes, all compressed inputs are expected
to be packed according to IEC61937 while PCM is 2.1
Application Code Logo, Name,
delivered according to IEC60958 in I2S or LeftDescription, and Notes
Justified digital audio format. DTS CDs are one
•
exception as they deliver compressed data
according to IEC60958.
AAC - Multichannel MPEG-2 AAC (LC,
ADTS) decoder with 5.1 channel output.
Data delivery is:
I2S or Left-Justified Compressed Digital audio
•
according to the IEC61937 specification or
PCM according to the IEC60958 specification
and is typically delivered from a S/PDIF
receiver.
Expected CLKIN = 12.288 MHz (Oscillator Value)
DSPCLK = Refer to AN163 (Application Code
Dependent)
Standard Hardware Configuration: OUTPUTA1
(DSP is Slave to MCLK, DSP Masters SCLK and
LRCLK)
Refer to AN163 and its appendices for how to
control AVR/Outboard Decoder-based Standard
Release Application Codes that run on the
CS4932X Family and/or the CS49330.
•
AAS_PROL2 - Stereo MPEG-2 AAC (LC,
ADTS) with Dolby Pro Logic II decoder
offering up to a 5.1 channel output.
[
®
ACEQ - Dolby Digital™ with Dolby Pro Logic
decoder and PCM input support. This code
features a 5 Channel, 5 Band Graphic Equalizer.
®
•
AC3 - Dolby Digital™ with Dolby Pro Logic
decoder and PCM input support. This code
features +/-12dB Tone Control.
®
The designer/manufacture should be aware that
Note: Tone Control is implemented as individual bass
obtaining and/or evaluation of any/all application
and treble control on the Left, Right, and Center
output channels.
codes requires signing of a Crystal Ware Software
Licensing Agreement (CWSEA). Additionally, a • AC3_CES - Dolby Digital™ with Dolby Pro
Crystal Ware Licensing Agreement (CWLA) must
Logic decoder and PCM input support. This
be signed before any/all application codes may be
code features Crystal Extra Surround™ which
used in any production-level design. Please contact
enables a 6.1 or 7.1 channel output.
your Cirrus Logic Sales Representative or FAE in
®
order to obtain the necessary contracts, application
codes and application notes.
P.O. Box 17847, Austin, Texas 78760
(512) 445 7222 FAX: (512) 445 7581
http://www.cirrus.com
Copyright  Cirrus Logic, Inc. 2001
(All Rights Reserved)
MAY ‘01
DS339AM3
1
CS4932X/CS49330
•
AC3_PROL2 - Dolby Digital with Dolby Pro
Logic II™ decoder and PCM input support.
]
•
®
AC3_PL2_CES - Dolby Digital with Dolby
Pro Logic II decoder and PCM input support.
This code features Crystal Extra Surround™
which enables a 6.1 or 7.1 channel output.
]
®
•
AC3_PL2_REEQ - Dolby Digital with Dolby
Pro Logic II decoder and PCM input support.
This code features user-programmable 2nd
Order IIR Biquads which are capable of
offering Re-EQ™ functionality. Re-EQ
coefficients are NOT supplied by Cirrus Logic,
Inc. Use of Re-EQ technology requires a
license from the THX Division of Lucasfilm,
Ltd.
]
®
Note: The three 2nd order IIR Biquads are available on
the Left, Right, and Center output channels only.
Contacting Cirrus Logic Support
For a complete listing of Direct Sales, Distributor, and Sales Representative contacts, visit the Cirrus Logic web site at:
http://www.cirrus.com/corporate/contacts/
Dolby Digital, AC-3, Dolby Pro Logic, Dolby Pro Logic II, Dolby Surround, Surround EX, Virtual Dolby Digital and the “AAC” logo are trademarks and the
“Dolby Digital” logo, “Dolby Digital with Pro Logic II” logo, “Dolby” and the double-”D” symbol are registered trademarks of Dolby Laboratories Licensing
Corporation. DTS, DTS Digital Surround, DTS-ES Extended Surround, DTS Neo:6, and DTS Virtual 5.1 are trademarks and the “DTS”, “DTS-ES”, “DTS
Virtual 5.1” logos are registered trademarks of the Digital Theater Systems Corporation. The “MPEG Logo” is a registered trademark of Philips Electronics
N.V. Home THX Cinema and THX are registered trademarks of Lucasfilm Ltd. Surround EX is a jointly developed technology of THX and Dolby Labs,
Inc. AAC (Advanced Audio Coding) is an “MPEG-2-standard-based” digital audio compression algorithm (offering up 5.1 discrete decoded channels for
this implementation) collaboratively developed by AT&T, the Fraunhofer Institute, Dolby Laboratories, and the Sony Corporation. In regards to the MP3
capable functionality of the CS49300 Family DSP (via downloading of mp3_493xxx_vv.ld and mp3e_493xxx_vv.ld application codes) the following
statements are applicable: “Supply of this product conveys a license for personal, private and non-commercial use. MPEG Layer-3 audio decoding
technology licensed from Fraunhofer IIS and THOMSON Multimedia.” MLP and Meridian Lossless Packing are registered trademarks of Meridian Audio
Ltd. Harman VMAx is a registered trademark of Harman International. The Logic 7 logo and Logic 7 are registered trademarks of Lexicon. SRS
CircleSurround, and SRS TruSurround are trademarks of SRS Labs, Inc. The HDCD logo, HDCD, High Definition Compatible Digital and Pacific
Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD technology
provided under license from Pacific Microsonics, Inc. This product’s software is covered by one or more of the following in theUnited States: 5,479,168;
5,638,074; 5,640,161; 5,872,531; 5,808,574; 5,838,274; 5,854,600; 5,864,311; and in Australia: 669114; with other patents pending. Intel is a registered
trademark of Intel Corporation. Motorola is a registered trademark of Motorola, Inc. I2C is a registered trademark of Philips Semiconductor. Purchase of
I2C Components of Cirrus Logic, Inc., or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use those
components in a standard I2C system. “Crystal Extra Surround” is a trademark and “Crystal” and “Cirrus Logic” are registered trademarks of Cirrus Logic, Inc. All
other names are trademarks, registered trademarks, or service marks of their respective companies. Cirrus Logic, Inc. does not dictate how Crystal Extra
Surround functionality is to be used in an end-system, nor does it assume any responsibility for it’s use. Use of any application code that contains Crystal
Extra Surround functionality implies that the designer, and the company he/she works for, assumes all liability and Cirrus Logic , Inc. will in no way be
held responsible for it’s misuse. Use of the Crystal Extra Surround code does NOT give the end system the right to use ANY of th e following terms or
their associated logos: “THX®”, “THX Surround EX™”, “Surround EX™”, “Dolby Digital Surround EX™”, or “DTS-ES™ Extended Surround”.
Preliminary product information describes products which are in production, but for which full characterization data is not yetavailable. Advance product information
describes products which are in development and subject to development changes. Cirrus Logic, Inc. has made best efforts to ensure that the information contained
in this document is accurate and reliable. However, the information is subject to change without notice and is provided “AS IS” without warranty of any kind (express
or implied). No responsibility is assumed by Cirrus Logic, Inc. for the use of this information, nor for infringements of patents or other rights of third parties. This
document is the property of Cirrus Logic, Inc. and implies no license under patents, copyrights, trademarks, or trade secrets. No part of this publication may be
copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photographic, or otherwise) without the prior
written consent of Cirrus Logic, Inc. Items from any Cirrus Logic website or disk may be printed for use by the user. However, no part of the printout or electronic
files may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photographic, or otherwise) without
the prior written consent of Cirrus Logic, Inc. The names of products of Cirrus Logic, Inc. or other vendors and suppliers appearing in this document may be
trademarks or service marks of their respective owners which may be registered in some jurisdictions. A list of Cirrus Logic, In c. trademarks and service marks can
be found at http://www.cirrus.com.
2
DS339AM3
CS4932X/CS49330
•
AC3D - Virtual Dolby Digital™ (Dolby
Digital/Dolby Pro Logic decoder with PCM
input support + Dolby Virtualizer Module).
Offers ability to have virtualized 5.1 channel
output using only 2 speakers. The virtualizer
can be disabled, offering a full 5.1 channel
output if desired.
•
CAR - Crystal Automotive DSP software is a
multi-channel PCM post processor capable of
accepting up to 8 PCM audio input channels.
Audio is processed in 8 blocks using
configurable audio processing modules. Each
block can be configured with one of the
modules or bypassed. The individual blocks are
highly configurable to allow each to act as a:
Fader, Dynamic Range Compressor (DRC),
Filter, Mixer, or Trim. Fs of PCM input must be
48kHz, 44.1kHz or 32kHz.
•
CS - SRS CircleSurround-5.1 is a PCM
Enhancement algorithm which accepts a 2
channel input and outputs up to 5.1 discrete
channels. This code also offers +/- 12dB of
Tone Control. Fs of PCM input must be 48kHz,
44.1kHz or 32kHz.
®
•
AC3I - Internal Boot Assist (IBA) program for
loading Dolby Digital/Dolby Pro Logic
decoder (with PCM input support) code from
internal ROM. Included in the cost of the
CS493253-CL or CS493263-CL.
®
Note: Please refer to AN163 for more detail regarding
the differences between IBA and Full Download
codes.
•
AC3R - Virtual Dolby Digital using SRS
TruSurround™ (Dolby Digital and Dolby Pro
Logic decoder with PCM input support + SRS
TruSurround Digital 5.1 Channel Virtualizer
Module). Offers ability to have virtualized 5.1
channel output using only 2 speakers. The
virtualizer can be disabled, offering a full 5.1
channel output if desired.
®
•
AC3X - Virtual Dolby Digital using VMAx™
Virtual Theater (Dolby Digital/Dolby Pro
Logic decoder with PCM input support +
VMAx Virtualizer Module). Offers ability to
have virtualized 5.1 channel output using only
2 speakers. The virtualizer can be disabled,
offering a full 5.1 channel output if desired.
®
®
Note: Tone Control is implemented as individual bass
and treble control on the Left, Right, and Center
output channels.
• CS2 - SRS CircleSurround II with Focus™ is
the next generation PCM Enhancement
algorithm from SRS Labs which accepts a 2
channel input and outputs up to 6.1 discrete
channels. This code also offers +/- 12dB of
Tone Control. Fs of PCM input must be 48kHz,
44.1kHz or 32kHz.
Note: Tone Control is implemented as individual bass
and treble control on the Left, Right, and Center
output channels.
• DTEQ - DTS Digital Surround™ decoder with
Dolby Pro Logic decoder (for when input is 2
channel DTS). This code features a 5 Channel,
5 Band Graphic Equalizer.
®
DS339AM3
3
CS4932X/CS49330
•
DTS - DTS Digital Surround™ decoder with
Dolby Pro Logic decoder. This code features
+/-12dB Tone Control.
•
®
®
Note: Tone Control is implemented as individual bass
and treble control on the Left, Right, and Center
output channels.
• DTS_6DOT1 - DTS-ES Extended Surround™
Note: Please refer to AN163 for more detail regarding
the differences between IBA and Full Download
codes.
• DTSR - DTS Virtual 5.1™ using SRS
Discrete 6.1 and Matrix 6.1 decoder.
•
DTSI - Internal Boot Assist (IBA) program for
loading DTS Digital Surround code from
internal ROM
TruSurround (DTS Digital Surround decoder +
SRS TruSurround Digital 5.1 Channel
Virtualizer Module). Offers ability to have
virtualized 5.1 channel output using only 2
speakers. The virtualizer can be disabled,
offering a full 5.1 channel output if desired.
DTS_CES - DTS Digital Surround™ decoder
with Dolby Pro Logic decoder. This code
features Crystal Extra Surround™ which
enables a 6.1 or 7.1 channel output.
®
®
•
Surround™
DTS_PL2 - DTS Digital
with Dolby Pro Logic II decoder.
®
•
•
DPP - Crystal Digital Post-Processor 5.1
Channel Post-Processor features Tone Control,
Parametric EQ, and dual-precision bass
management. This code accepts a 5.1 channel
input to the CS493302-CL from the output of a
CS4932x Family DSP.
[
decoder
®
DTS_PL2_REEQ - DTS Digital Surround™
decoder with Dolby Pro Logic II decoder. This
code features user-programmable 2nd Order
IIR Biquads which are capable of offering ReEQ™ functionality. Re-EQ coefficients are
NOT supplied by Cirrus Logic, Inc. Use of ReEQ technology requires a license from the THX
Division of Lucasfilm, Ltd.
®
4
DVDA_BASS_MGR - DVD Audio Bass
Manager application code is capable
performing advanced bass management for 2
channel 192kHz PCM audio data or 6 channel
96kHz PCM audio data. This code is designed
for an AVR that is “SACD Multichannel or
DVD Audio Ready” via high performance
(192kHz) A/Ds.
DTS_NEO6 - DTS Neo:6™ PCM Processing
Enhancement which accepts a 2 channel input
and outputs up to 6.1 discrete channels in either
a Music or Cinema mode. Fs of PCM input
must be 48kHz, 44.1kHz or 32kHz.
Neo:6
•
•
[
®
Note: Tone Control includes basic bass and treble
control for each full bandwidth channel. The
parametric EQ can not be changed after
kickstart. Delays are all channel.
•
DPP8 - Crystal Digital Post-Processor 7.1
Channel Post-Processor features Tone Control,
Parametric EQ, and dual-precision bass
management. This code accepts a 7.1 channel
input to the CS493302-CL from the output of a
CS4932x Family DSP.
DS339AM3
CS4932X/CS49330
Note: Tone Control includes basic bass and treble
control for each full bandwidth channel. The
parametric EQ can not be changed after
kickstart. Delays are all channel.
•
EFF - (a.k.a. C.O.S. - Crystal Original Sound)
Reverberative and delay effects code for stereo
to multichannel effects processing and +/-12dB
Tone Control. This code allows for designers to
generate such DSP modes as: Concert Hall,
Theater, Jazz Club, etc.
Note: Tone Control is implemented as individual bass
and treble control on the Left, Right, and Center
output channels. There is an output mixer for
each channel allowing for multiple speaker
configuration settings. However, conventional
downmixing is not applicable in the effects code.
•
EFF_REEQ - Crystal Original Sound with +/12dB Tone Control in addition to userprogrammable 2nd Order IIR Biquads which
are capable of offering Re-EQ™ functionality.
Re-EQ coefficients are NOT supplied by Cirrus
Logic, Inc. Use of Re-EQ technology requires a
license from the THX Division of Lucasfilm,
Ltd.
•
Note: Autodetection for HDCD is a two step process,
please see AN163D for details.The HDCD code
is capable of accepting and autodetection HDCD
and non-HDCD encoded PCM stereo inputs with
an Fs from 32 kHz to 96 kHz. HDCD processing
is only available for input streams 48kHz and
lower. The HDCD is also capable of upsampling
32 kHz to 64 kHz, 44.1 kHz to 88.2 kHz, and
48kHz to 96kHz.
• LG7 - Logic 5™ (previously called “Logic 7”)
is a PCM Enhancement algorithm created by
Lexicon, a Harman International Companym
which accepts a 2 channel input and outputs up
to 5.1 discrete channels. Fs of PCM input must
be 48kHz, 44.1kHz or 32kHz..
•
Note: Tone Control is implemented as individual bass
and treble control on the Left, Right, and Center
output channels. Re-EQ is implemented on only
the L, C, and R channels. There is an output
mixer for each channel allowing for multiple
speaker configuration settings. However,
conventional downmixing is not applicable in the
effects code.
•
EFFI - Internal Boot Assist (IBA) program for
loading Crystal Original Surround code
Note: There is an output mixer for each channel
allowing for multiple speaker configuration
settings. However, conventional downmixing is
not applicable in the effects code. Please refer to
AN163 for more detail regarding the differences
between IBA and Full Download codes.
DS339AM3
HDC - Pacific Microsonics HDCD™ PCM
Enhancement offers upsampling and resolution
enhancement.
LG7_7DOT1 - Logic 7™ is the next generation
PCM Enhancement algorithm from Lexicon, a
Harman International Company, which accepts
a 2 channel input and outputs up to 7.1 discrete
channels. Fs of PCM input must be 96kHz,
88.2kHz, 64kHz, 48kHz, 44.1kHz or 32kHz..
®
•
MPEQ - MPEG Multichannel with Dolby Pro
Logic decoder. This code features a 5 Channel,
5 Band Parametric Equalizer
®
Note: The MPEQ code ONLY supports the following
MPEG streams: MPEG-2, Layer 2 (with and
without extension). MPEG-2 Low Sampling
Frequencies are currently not supported. Please
refer to AN163 for more details on stream
support.
5
CS4932X/CS49330
•
MPG - MPEG Multichannel with Dolby Pro
Logic decoder. This code features +/-12dB
Tone Control.
•
MPGR - MPEG + SRS TruSurround (MPEG
Multichannel decoder + SRS TruSurround
Virtualizer Module)
®
®
Note: The MPG code ONLY supports the following
MPEG streams: MPEG-2, Layer 2 (with and
without extension). MPEG-2 Low Sampling
Frequencies are currently not supported. Please
refer to AN163 for more details on stream
support. Tone Control is implemented as
individual bass and treble control on the Left,
Right, and Center output channels.
•
MPG_CES - MPEG Multichannel with Dolby
Pro Logic decoder. This code features Crystal
Extra Surround™ which enables a 6.1 or 7.1
channel output.
®
Note: The MPG_CES code ONLY supports the
following MPEG streams: MPEG-2, Layer 2 (with
and without extension). MPEG-2 Low Sampling
Frequencies are currently not supported. Please
refer to AN163 for more details on stream
support.
•
Note: The MPG code ONLY supports the following
MPEG streams: MPEG-2, Layer 2 (with and
without extension). MPEG-2 Low Sampling
Frequencies currently not supported. Please
refer to AN163 for more details on stream
support.
•
MP3 - MPEG-1, Layer 3 (MP3) Decoder
Note: Due to the fact that the Pc value of 0x5 in the
IEC61937 specifcation pertains to more than one
type of MPEG stream type, autodetection of
IEC61937-packed MP3 data is a two step
process. Please refer to AN163 for details.
Please refer to the legal section for more
information about the use of this application
code.
•
PDF - Dolby Pro Logic Double Sampling
Frequency Decoder (Fs = 64 kHz, 88.2 kHz,
96 kHz) and PCM Upsampler.
MPG_PL2 - MPEG Multichannel with Dolby
Pro Logic II decoder.
®
[
®
Note: The MPG_PL2 code ONLY supports the
following MPEG streams: MPEG-2, Layer 2 (with
and without extension). MPEG-2 Low Sampling
Frequencies are currently not supported. Please
refer to AN163 for more details on stream
support.
®
Note: The PDF code is capable of accepting 32 kHz to
96 kHz PCM stereo input and can perform a Pro
Logic decode. The PDF code can also upsample
32 kHz to 64 kHz, 44.1 kHz to 88.2 kHz, and
48kHz to 96kHz in addition to perform a Dolby
Pro Logic decode of the upsampled PCM.
•
PL2_2FS - Dolby Pro Logic II Double
Sampling Frequency Decoder (Fs = 64 kHz,
88.2 kHz, 96 kHz) and PCM Upsampler.
[
®
Note: The PL2_2FS code is capable of accepting
32 kHz to 96 kHz PCM stereo input and can
perform a Pro Logic II decode. The PL2_2FS
code can also upsample 32 kHz to 64 kHz, 44.1
kHz to 88.2 kHz, and 48kHz to 96kHz in addition
to perform a Dolby Pro Logic II decode of the
upsampled PCM.
6
DS339AM3
CS4932X/CS49330
•
THX - Home THX Cinema™ 5.1 Channel PostProcessor offers: Re-Eq™, Timbre Matching™,
Adaptive Decorrelation™ THX Bass Peak
Limiter™, Loudspeaker Position Time
Synchronization™ (all-channel delays), in
addition to tone control and parametric
equalization.
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel (Sb). The parametric EQ
can not be changed after kickstart. Delays are all
channel. Please refer to AN163H for more
information about the Home THX Cinema 5.1
Channel Post-Processor code.
• THX8 - Home THX Cinema™ 7.1 Channel
Post-Processor offers: Re-Eq™, Timbre
Matching™, Adaptive Decorrelation™ THX
Bass Peak Limiter™, Loudspeaker Position
Time Synchronization™ (all-channel delays),
in addition to tone control and parametric
equalization. THX8 differs from the THX code
in the sense that it can post process
multichannel sources that have more than 5.1
discrete channels, such as DTS-ES Discrete 6.1
streams.
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel (Sb). The parametric EQ
can not be changed after kickstart. Delays are all
channel. Please refer to AN163O for more
information about the Home THX Cinema 7.1
Channel Post-Processor code.
DS339AM3
•
TEX - THX Surround EX™ 5.1 Channel PostProcessor offers all of the post-processing
features of the THX code, however TEX also
offers the Surround EX module. The Surround
EX module performs a matrix decode on Ls and
Rs, using a Dolby Pro Logic decoder in 3
Channel Stereo mode, to create an additional
back surround channel. This surround back
channel is then copied to the output channels of
Sbl and Sbr in order to give a 7.1 channel
output.
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. Surround EX decoding should only be
enabled when material is Dolby Surround EX
encoded. Please refer to AN163H for more
information about the THX Surround EX 5.1
Channel Post-Processor code.
• TEXO - THX Surround EX™ 5.1 Channel
Post-Processor offers all of the post-processing
features of the TEX code, however TEXO also
offers extended all channel delays (up to 105ms
on all channels).
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. A 1MBit External SRAM (70nS) is
required to be connect to the CS49330 in order
for this code to function. Surround EX decoding
should only be enabled when material is Dolby
Surround EX encoded. Please refer to AN163H
for more information about the THX Surround EX
5.1 Channel Post-Processor code.
7
CS4932X/CS49330
•
TEXO_2MB - THX Surround EX™ 5.1
Channel Post-Processor offers all of the postprocessing features of the TEX code, however
TEXO_2MB also offers extended all channel
delays (up to 221ms on all channels).
•
TEXO8 - THX Surround EX™ 7.1 Channel
Post-Processor offers all of the post-processing
features of the TEX code, however TEXO8
also offers extended all channel delays (up to
105ms on all channels).
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. A 2MBit External SRAM (70nS) is
required to be connect to the CS49330 in order
for this code to function. Surround EX decoding
should only be enabled when material is Dolby
Surround EX encoded. Please refer to AN163H
for more information about the THX Surround EX
5.1 Channel Post-Processor code.
• TEX8 - THX Surround EX™ 7.1 Channel Post-
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. A 1MBit External SRAM (70nS) is
required to be connect to the CS49330 in order
for this code to function. Surround EX decoding
should only be enabled when material is Dolby
Surround EX encoded. Please refer to AN163O
for more information about the THX Surround EX
7.1 Channel Post-Processor code.
• TEXO8_2MB - THX Surround EX™ 7.1
Processor offers all of the post-processing
features of the THX8 code, however TEX also
offers the Surround EX module. The Surround
EX module performs a matrix decode on Ls and
Rs, using a Dolby Pro Logic decoder in 3
Channel Stereo mode, to create an additional
back surround channel. This surround back
channel is then copied to the output channels of
Sbl and Sbr in order to give a 7.1 channel
output. TEX8 differs from the TEX code in the
sense that it can post process multichannel
sources that have more than 5.1 discrete
channels, such as DTS-ES Discrete 6.1
streams.
Channel Post-Processor offers all of the postprocessing features of the TEX code, however
TEXO8_2MB also offers extended all channel
delays (up to 221ms on all channels).
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. A 2MBit External SRAM (70nS) is
required to be connect to the CS49330 in order
for this code to function. Surround EX decoding
should only be enabled when material is Dolby
Surround EX encoded. Please refer to AN163O
for more information about the THX Surround EX
7.1 Channel Post-Processor code.
Note: The tone control includes basic bass and treble
control for each full bandwidth channel, including
Surround Back channel. The parametric EQ can
not be changed after kickstart. Delays are all
channel. Surround EX decoding should only be
enabled when material is Dolby Surround EX
encoded. Please refer to AN163O for more
information about THX Surround EX 7.1 Channel
Post-Processor code.
8
DS339AM3
DS339AM3
Part(ROMID)
ACEQ
AC3
AC3_CES
AC3_PROL2
AC3_PL2_CES
AC3_PL2_REEQ
AC3D
AC3I
AC3R
AC3X
CAR
CS
CS2
CS49325(3)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II) and Crystal Ware
CS49326(3)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II), DTS and Crystal Ware
Y
Y
Y
Y
Y
Y
Y
Y
Y
CS49329(2)
AAC
AAS_PROL2
Y
Y
CS49330(2)
Y
Y
Y
Y
Y
Y
DPP
DPP8
Licensing Required to Receive Samples/Production Quantities of IC
Dolby Digital (with or without Pro Logic II), DTS, AAC and Crystal Ware
Y
Y
Crystal Ware
Table 1. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes
available through the Crystal Ware Licensing Program
Part(ROMID)
DTEQ
DTS
DTS_6DOT1
DTS_CES
DTS_NEO6
DTS_PL2
DTS_PL2_REEQ
DTSI
DTSR
DVDA_BASS_MGR
EFF
EFF_REEQ
EFFI
HDC
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II)
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II) and DTS
CS49325(3)
CS49326(3)
Y
Y
Y
Y
Y
Y
Y
CS49329(2)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
CS49330(2)
Licensing Required to Receive Samples/Production Quantities of IC
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II), DTS, and AAC
Y
Y
Y
Y
License-Free Part
Table 2. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes
available through the Crystal Ware Licensing Program (Continued)
Part(ROMID)
LG7 LG7_7DOT1 MPEQ
MPG_CES
MPG_PL2
MPGR
MP3
PDF
PL2_2FS
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II)
CS49326(3)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Dolby Digital (with or without Pro Logic II) and DTS
Y
Y
CS49329(2)
Y
Y
Y
Y
Y
Y
Y
Y
CS49330(2)
Y
Y
Y
Y
Y
Y
Y
Y
TEX
TEX8
TEXO
TEXO_2MB
TEXO8
TEXO8_2MB
THX
THX8
Licensing Required to Receive Samples/Production Quantities of IC
Dolby Digital (with or without Pro Logic II), DTS, and AAC
Y
Y
Y
Y
Y
Y
Y
Y
License-Free Part
Table 3. CS4932X/CS49330: AVR/Outboard Decoder Application Subfamily and Associated AVR/Outboard Decoder-based Application Codes
available through the Crystal Ware Licensing Program (Continued)
9
CS4932X/CS49330
MPG
CS49325(3)
10
Code
Name
Required
Licensing
(in addition
to signing of
Crystal Ware
Licensing
Agreements)
Documentation
Required in
Addition to
CS49300 Data
Sheet and
AN163
Playable
Input
AAC
Dolby
N/A
AAS_PL2
Dolby
AN163M
Tone
Control
Re-EQ/
Graphic
EQ/
Parametric
EQ
Dual-Precision
Bass Manager
Karaoke
Delays
Contains
Crystal Extra
Surround
which offers
6.1/7.1 channel
matrix
decoded
output
N/A
No
No
Yes
No
No. Delays only
available when
in Pro Logic mode
No
Yes
32K x 8,
70ns
N/A
No
No
Yes
No
Yes
No
No
Yes
Capable,
no mixing
Yes
No
No
Yes
Capable,
no mixing
Yes
No
No
Yes
Capable,
no mixing
Yes
Yes
No
Yes
Capable,
no mixing
Yes
No
No
Yes
Yes
No
Autodetection
Dolby
Pro Logic
or
Dolby Pro
Logic II
Virtualizer
Module
Downmix
Dualzone
Output
Pink
Noise
Automatic
Fs/
Coefficient
Change for
Deemphasis
(for 32kHz to
48kHz)
AAC
(ADTS, LC)
5.1 Channel
Normal
Pro Logic
N/A
Yes
Yes
No
AAC
(ADTS, LC)
2 Channel
Normal
Pro Logic II
N/A
Yes
Yes
No
ACEQ
Dolby
AN163K
AC3 + PCM
Normal
Pro Logic
N/A
Yes
Yes
Yes
Automatic
No
5 Channel,
5-Band
Graphic
AC3
Dolby
N/A
AC3 + PCM
Normal
Pro Logic
N/A
Yes
Yes
Yes
Automatic
Yes
No
AC3_CES
AC3_PROL2
AC3_PL2_CES
AC3_PL2_REEQ
AC3D
Dolby
AN163R
Dolby
AN163M
Dolby
AN163M,
AN163R
Dolby
AN163M,
AC3_PL2_REEQ
Release Notes
Dolby
AN163A
AC3 + PCM
AC3 + PCM
AC3 + PCM
AC3 + PCM
Normal
Normal
Normal
Normal
Dolby
AC3R
Dolby &
SRS Labs
AN163F
AC3 + PCM
AC3X
Dolby &
Harman
AN163B
AC3 + PCM
CAR
Only Crystal
Ware
AN160
M/C +
Stereo PCM
None
SRS Labs
CS2
SRS Labs
DPP
Only Crystal
Ware
DPP8
Only Crystal
Ware
AN163C
AC3 + PCM
Normal
AC3I
CS
N/A
AC3 + PCM
PCM
AN163T
PCM
AN163G
M/C +
Stereo PCM
AN163Q
M/C +
Stereo PCM
Normal
Pro Logic
Pro Logic II
Pro Logic II
N/A
N/A
N/A
Pro Logic II
N/A
Pro Logic
Dolby
Virtualizer
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Automatic
Automatic
Automatic
Automatic
No
No
No
No
No
Yes
Capable,
no mixing
No
Re-EQ
(only on
L, C, R
Channels)
Yes
Capable,
no mixing
Yes
No
No
Yes
Capable,
no mixing
Yes
No
No
Yes
Capable,
no mixing
Yes
No
No
No
Pro Logic
Yes
Yes
Yes
Automatic
No
No
Yes
Yes
No
No
Pro Logic
Harman
VMAx
Yes
Yes
Yes
Automatic
No
No
Yes
Capable,
no mixing
Yes
No
No
No
N/A
No
No
No
N/A
Yes
Multiband
Parametric
Yes
No
Yes
No
No
No
Yes,
Pass-through
No
Automatic
Yes
No
Yes
No
Yes
No
No
No
Yes,
Pass-through
No
Automatic
Yes
No
Yes
No
Yes
No
No
Yes
5Channel,
3-Band
Parametric
Yes
Capable,
with mixing
Yes
No
No
Yes
5Channel,
3-Band
Parametric
Yes
Capable,
with mixing
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
None
None
No
No
N/A
N/A
N/A
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
No
DTEQ
DTS
AN163K
DTS
Normal
Pro Logic
N/A
Yes
Yes
No
N/A
Yes
5 Channel,
5-Band
Graphic
DTS
DTS
N/A
DTS
Normal
Pro Logic
N/A
Yes
Yes
No
N/A
Yes
No
DTS_6DOT1
DTS
AN163L
DTS, DTS-ES
Normal
No
N/A
Yes
No
No
N/A
No
No
Yes
Yes
Yes
No
DTS_CES
DTS
AN163K
DTS, DTS-ES
Normal
No
N/A
No
No
No
N/A
No
No
Yes
Yes
Yes
Yes
No
DTS_NEO6
DTS
AN163N
PCM
Normal
No
N/A
No
No
No
Automatic
No
No
Yes
No
Yes
No
No
No
DS339AM3
DTS_PL2
DTS, Dolby
N/A
DTS
Normal
Pro Logic II
N/A
Yes
Yes
No
N/A
No
No
Yes
Yes
Yes
No
DTS_PL2_REEQ
DTS
N/A
DTS
Normal
Pro Logic II
N/A
Yes
Yes
No
N/A
No
Re-EQ
Yes
Yes
Yes
No
No
DTSI
DTS
N/A
DTS
Normal
No
N/A
Yes
Yes
No
N/A
No
No
Yes
Yes
Yes
No
No
DTSR
DTS &
SRS Labs
AN163F
DTS
Normal
Pro Logic
SRS
TruSurround
Yes
Yes
No
N/A
Yes
No
Yes
Yes
Yes
No
No
DVDA_BASS_
MGR
Only Crystal
Ware
AN163U
M/C +
Stereo PCM
None
No
N/A
Yes
Yes
Yes
N/A
Yes
No
Yes
No
Yes
No
No
EFF
Only Crystal
Ware
N/A
No.
See notes
Yes,
Pass-through
No
Automatic
Yes
No
Yes
Yes
Yes
No
No
N/A
PCM
Normal
No
Table 4. CS4932X/CS49330: AVR/Outboard Decoder Application Code Functionality and Feature Overview
CS4932X/CS49330
Normal
Normal
No
No
No
Capable,
no mixing
Normal
Manual
No
N/A
N/A
Yes
Automatic
SRS
TruSurround
No
Yes
No
Pro Logic
Normal
Yes
No
External
SRAM
Required
DS339AM3
Code
Name
Required
Licensing
(in addition
to signing of
Crystal Ware
Licensing
Agreements)
Documentation
Required in
Addition to
CS49300 Data
Sheet and
AN163
Playable
Input
EFF_REEQ
Only Crystal
Ware
N/A
PCM
EFFI
Only Crystal
Ware
HDC
Pacific
Microsonics
AN163D
PCM
See Notes
No
LG7
Lexicon
AN163E
PCM
Normal
No
LG7_7DOT1
Lexicon
AN163S
PCM
Normal
MP3
Only Crystal
Warea
N/A
MPEG.
See Notes
See Notes
N/A
PCM
Tone
Control
Re-EQ/
Graphic
EQ/
Parametric
EQ
Dual-Precision
Bass Manager
Karaoke
Delays
Contains
Crystal Extra
Surround
which offers
6.1/7.1 channel
matrix
decoded
output
Automatic
Yes
Re-EQ
Yes
Yes
Yes
No
No
No
Manual
No
No
Yes
No
Yes
No
No
No
Automatic
No
No
Yes
No
Yes
No
No
No
Automatic
No
No
Yes
No
Yes
No
No
No
No
Automatic
No
No
Yes
No
Yes
No
No
Yes
No
N/A
No
No
Yes
No
Yes
No
No
N/A
No
5 Channel,
5-Band
Graphic
Yes
No
Yes
No
No
Autodetection
Dolby
Pro Logic
or
Dolby Pro
Logic II
Virtualizer
Module
Downmix
Dualzone
Output
Pink
Noise
Automatic
Fs/
Coefficient
Change for
Deemphasis
(for 32kHz to
48kHz)
Normal
No
N/A
No.
See notes
Yes,
Pass-through
No
N/A
No.
See notes
Yes,
Pass-through
N/A
No
Yes,
Pass-through
N/A
No
Yes,
Pass-through
No
N/A
No
No
N/A
Yes
Normal
No
External
SRAM
Required
MPEQ
Only Crystal
Ware
AN163K
MPEG.
See Notes
Normal
Pro Logic
N/A
Yes
Yes
MPG
Only Crystal
Ware
N/A
MPEG.
See Notes
Normal
Pro Logic
N/A
Yes
Yes
No
N/A
Yes
No
Yes
No
Yes
No
No
MPG_CES
Only Crystal
Ware
N/A
MPEG.
See Notes
Normal
Pro Logic
N/A
No
No
No
N/A
No
No
Yes
No
Yes
Yes
No
N/A
MPEG.
See Notes
Normal
Pro Logic II
N/A
Yes
Yes
No
N/A
No
No
Yes
No
Yes
No
No
AN163F
MPEG.
See Notes
Pro Logic
SRS
TruSurround
Yes
Yes
No
N/A
No
No
Yes
No
Yes
No
No
Yes
Yes,
Pass-through
/Upsampled
No
Automatic
No
No
Yes
No
Yes
No
No
No
Automatic
No
No
Yes
No
Yes
No
No
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes
No
No
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes
No
No
MPG_PL2
MPGR
PDF
PL2_2FS
TEX
TEX8
TEXO
Dolby
SRS Labs
Dolby
Dolby
THX
THX
THX
AN163I
PCM
Normal
Normal
Pro Logic
N/A
No
AN163P
PCM
Normal
Pro Logic II
N/A
Yes
Yes,
Pass-through
/Upsampled
AN163H
M/C +
Stereo PCM
Mixer Input
(5.1 + 2)
None
No
N/A
Yes
Yes
AN163O
M/C +
Stereo PCM
Input (7.1)
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
AN163H
M/C +
Stereo PCM
Mixer Input
(5.1 + 2)
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes (105ms on all
channels)
No
Yes
128K x 8,
70ns
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes (221ms on all
channels)
No
Yes
256K x 8,
70ns
THX
AN163H
TEXO8
THX
AN163O
M/C +
Stereo PCM
Input (7.1)
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes (105ms on all
channels)
No
Yes
128K x 8,
70ns
TEXO8_2MB
THX
AN163O
M/C +
Stereo PCM
Input (7.1)
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes (221ms on all
channels)
No
Yes
256K x 8,
70ns
AN163H
M/C +
Stereo PCM
Mixer Input
(5.1 + 2)
None
No
N/A
Yes
Yes
Yes + THX
N/A
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes
No
No
AN163O
M/C +
Stereo PCM
Input (7.1)
Yes
3-Band
Parametric
+ Re-EQ
Yes +
THX Bass
Limiter
Capable,
no mixing
Yes
No
No
THX
THX8
THX
THX
None
No
N/A
Yes
Yes
Yes + THX
N/A
Table 4. CS4932X/CS49330: AVR/Outboard Decoder Application Code Functionality and Feature Overview (Continued)
a.The associated licensing fees for using MPEG, Layer 3 technology licensed from Fraunhofer IIS and THOMSON multimedia are covered by the Crystal Ware Licensing Program. No additional contracts need be signed by the OEM or end-customer in order to use the MP3 firmware.
11
CS4932X/CS49330
TEXO_2MB
M/C +
Stereo PCM
Mixer Input
(5.1 + 2)
Similar pages