Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com Features ● LARGE SIZE. ● 4.0 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● HIGH LIGHT OUTPUT. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MR (GaAlAs) Unit Reverse Voltage Per Segment Or (Dp) VR 20 (10) V Forward Current Per Segment Or (Dp) IF 60 (30) mA Forward Current (Peak) Per Segment Or (Dp) 1/10 Duty Cycle 0.1ms Pulse Width iFS 310(155) mA Power Dissipation Per Segment Or (Dp) PT 600(150) Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DMR100A Emitting Color Red Published Date : MAR 12,2008 mW °C 260°C For 3~5 Seconds Emitting Material GaAlAs Unit Forward Voltage (Typ.) Per Segment Or (Dp) (IF=10mA) VF 7.2 (3.6) V Forward Voltage (Max.) Per Segment Or (Dp) (IF=10mA) VF 10.0 (5.0) V Reverse Current Per Segment Or (Dp) (Max.) (VR=20(10)V) IR 20 (10) uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 660 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 640 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF Luminous Intensity (IF=10mA) ucd min. typ. 26000 104990 Drawing No : SDSA0764 MR (GaAlAs) Wavelength nm λP Description 660 Common Anode, Rt. Hand Decimal V5 Checked : Shin Chi P.1/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com MR Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.2/5 Part Number: 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com Published Date : MAR 12,2008 DMR100A Drawing No : SDSA0764 V5 Checked : Shin Chi P.3/5 Part Number: DMR100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com DMR100A Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 12,2008 Drawing No : SDSA0764 V5 Checked : Shin Chi P.4/5 Part Number: 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 12,2008 DMR100A Drawing No : SDSA0764 DMR100A V5 Checked : Shin Chi P.5/5