ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Features 1. 2. 3. 4. 5. 6. RoHS compliant and lead-free EIA size 0402, 0603 Ultra-low capacitance (<0.2pF) and low leakage current (<0.05uA) Fast response time ( <1ns) Single-line, bi-directional device Rate for ESD protection and pass IEC 61000-4-2 level 4 test Recommended Applications 1. High-Speed Data Lines (HDMI, Serial ATA, USB, IEEE1394) 2. Antenna Circuit (Cellular phone, GPS…) 3. Digital Cameras 4. Set-Top Boxes 5. Printer Ports Part Number Code L C P 0 G 0 5 0 M 0 R 2 R 1 2 3 4 5 6 7 8 9 10 11 12 13 Product Type LCP Low Capacitance ESD Suppressor LCP Type Size 0 0402 1 0603 Max. Operating Voltage (VDC ) 050 5V 120 12V Max. Capacitance M0R2 0.2pF (@1MHZ, 1Vrms) Packaging R Reel Series Code G G Series THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 1 www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Structure and Dimensions (Unit : mm) Part No. Size (EIA) L1 W H L2 and L3 LCP0G 0402 1.00 ± 0.15 0.50 ± 0.10 0.35 ± 0.1 0.20 ± 0.10 LCP1G 0603 1.60 ± 0.15 0.80 ± 0.15 0.50 ± 0.15 0.35 ± 0.15 Electrical Characteristics Part No. Size LCP0G050M0R2R 0402 LCP1G050M0R2R 0603 LCP0G120M0R2 0402 LCP1G120M0R2 0603 Max. Operating Voltage Typical Trigger Voltage VDC (V) VT (V) 5 300 12 Max. Clamping Voltage Capacitance @8KV, 30ns @1MHZ, (*1) 1Vrms Vc (V) C Max. Min. ESD Leakage Pulse Current Withstand @VDC Insulation Resistance Operating Temperature Range R(MΩ) (℃) Typical Max. IL (µA) Times (pF) 0.2 30 100 0.05 1000 >100 -40 ~ +85 360 Note *1: The clamping voltage follows IEC 61000-4-2, level4 8 kV contact discharge and shall be measured at 30 ns after initiation of pulse. THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 2 www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Typical Application Circuit Eye Diagram USB 2.0 Protection SMD Varistor PPTC VBUS D+ USB Port DGND LCP Series Soldering Recommendation IR-Reflow Soldering Profile Preheating Peak temp Cooling 255~260℃ 60~150 sec Temperature 217℃ 150~200℃ Tamb 3℃/sec (max.) 3℃/sec (max.) 60~180 sec 20~40 sec 6℃/sec (max.) t 8 minutes max Time THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 3 www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Recommended Reworking Conditions with Soldering Iron Item Conditions Temperature of Soldering Iron-tip 360℃ ( max. ) Soldering Time 3 sec ( max. ) Diameter of Soldering Iron-tip Φ3mm ( max. ) Caution: Do not touch the component surface with soldering iron directly to prevent it from damage. Recommended Soldering Pad Dimensions X Y Size (EIA) Z (mm) G (mm) X (mm) Y (mm) 0402 1.7 0.5 0.6 0.6 0603 3.0 1.0 1.0 1.0 G Z Electrostatic Discharge-ESD Reliability * Follow IEC61000-4-2 THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 4 www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Reliability Item Standard Test conditions / Methods Specifications Resistance to Soldering Heat IEC 60068-2-58 260 ± 5 ℃, 10 ± 1 sec IL ≦10µA No visible damage High Temperature Load IEC 1051-1 85 ± 2 ℃, 1000 ± 24 hrs at VDC IL ≦10µA No visible damage Damp Heat Load, Steady State IEC 1051-1 40±2℃, 90-95%RH, 1000±24hrs, at VDC IL ≦10µA No visible damage The conditions shown below shall be repeated 5 cycles Rapid Change of Temperature IEC 1051-1 THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. Step 1 2 3 4 Temperature (℃) -40±5 Room temperature 85±5 Room temperature 5 Period (minutes) 30±3 5±3 30±3 5±3 IL ≦10µA No visible damage www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Packaging Taping Specification (Unit : mm) Type 0402 B0 A0 Index W E P1 F P2 P0 D0 K0 ±0.1 ±0.12 ±0.2 ±0.1 ±0.05 ±0.1 ±0.05 ±0.1 ±0.1 ±0.1 0.68 1.13 8 1.75 3.5 4 2 4 1.55 0.40 (Unit : mm) Index Type 0603 A0 B0 W E F P1 P2 P0 D0 K0 ±0.2 ±0.2 ±0.2 ±0.1 ±0.05 ±0.1 ±0.05 ±0.1 ±0.1 ±0.1 1.1 1.9 THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 8 1.75 3.5 4 6 2 4 1.55 0.59 www.thinking.com.tw 2011.06 ESD Protector： ：LCP Series Ultra-Low Capacitance ESD Suppressor for High-Speed Application Quantity Reel Packing Type Quantity (pcs/reel) 0402 10,000 0603 4,000 Storage Conditions of Products Storage Conditions : 1. Storage Temperature : -10℃~+40℃ 2. Relative Humidity : ≦75%RH 3. Keep away from corrosive atmosphere and sunlight. Period of Storage: 1 year. THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 7 www.thinking.com.tw 2011.06