Type: LS−11S Article No.: 266105 Sales text Plunger,snap−action contact Basic unit Ordering information Description Expandable with operating heads Auxiliary contacts: = safety function, by positive opening to IEC/EN 60947−5−1 N/O = Normally open 1 N/O N/C = Normally closed 1 N/C Function Snap−action contact Housing Insulated material Terminal connection Cage Clamp Contact sequence Contact diagram 1 Colour of enclosure cover Note concerning the product EN 50047 Form B Notes concerning the table header Contact travel = contact closed = contact open = setting range Notes concerning the product group Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. General Standards IEC/EN 60947 Climatic proofing Damp heat, constant, to IEC 60068−2−78; damp heat, cyclical, to IEC 60068−2−30 Ambient temperature °C ... 25...+70 Mounting position As required Protection type IP66, IP67 Terminal capacity of screw terminal and Cage Clamp mm2 1 × (0.5 – 2.5) mm 2 1 × (0.5 – 1.5) Uimp V AC 4000 Ui V 400 Solid Flexible with ferrules to DIN 46228 Contacts/switching capacity Rated impulse withstand voltage Rated insulation voltage 2 Overvoltage category/pollution degree III/3 Rated operational current AC–15 24 V Ie A 6 230 V/240 V Ie A 6 400 V/415 V Ie A 4 24 V Ie A 3 110 V Ie A 0,8 220 V Ie A 0,3 DC−13 Control circuit reliability at 24 V DC/5 mA HF Fault < 10 −7, < 1 fault in 107 probability operations at 5 V DC/1 mA HF Fault < 10−6, < 1 failure at 5 × probability 106 operations Supply frequency Hz max. 400 Short−circuit rating to IEC/EN 60947−5−1 max. fuse A gG/gL Repetition accuracy mm 6 0,02 Mechanical variables Lifespan Standard−action contact Snap−action contact Operations × 106 8 Operations 6 8 Contact temperature of roller head × 10 °C 100 Mechanical shock resistance (half−sinusoidal shock, 20 ms) Standard−action contact Operating frequency g Operations/h 25 6000 Actuation Mechanical Actuating force at beginning/end of stroke Basic units N 1.0/8.0 LS(M)−XP N 1.0/8.0 LS(M)−XL N 1.0/8.0 LS(M)−XLA N 1.0/8.0 Actuating torque of rotary drives 3 Nm 0,2 Max. operating speed with DIN cam Basic units for angle of actuation = 0°/30° m/s 1/0.5 LS(M)−XRL for angle of actuation = 0° m/s 1,5 = 30°, L = 125 mm m/s 1,5 L = 130 mm m/s 1,5 LS(M)−XL for angle of actuation = 30°/45° m/s 1 LS(M)−XLA for angle of actuation = 30°/45° m/s 1 LS(M)−XP for angle of actuation = 0°/30° m/s 1/1 LS(M)−XRLA for angle of actuation LS(M)−XRR for Notes Notes Cage Clamp is a registered trademark of Wago Kontakttechnik, 32423 Minden, Germany. Accessories for the Cage Clamp terminals from Wago: Jumper insert, grey, Wago article no. 264−402 Tightening torque of cover screws: 0.8 Nm ±0.2 Nm only with LS (insulated version) Fixing screws 2 x M4 30 MA = 1.5 Nm Dimensions Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn E−Mail: [email protected], Internet: www.moeller.net, http://catalog.moeller.net Copyright 2006 by Moeller GmbH. HPL−C2007G V2.1 4