FM4001-M thru FM4007-M SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SOD-123 0.154(3.9) 0.138(3.5) 0.012(0.3) Typ . 0.071(1.8) 0.055(1.4) 0.126(3.2) 0.110(2.8 ) 0.067(1.7) 0.051(1.3) 0.035(0.9) Typ . 0.035(0.9) Typ . Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Ufizing Flame Retardant Epoxy Molding Compound. For surface mounted applications. Exceeds environmental standards of ML-S-19500/228 Low leakage current Case JEDEC SOD-123/MINI-SMA molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Indicated by cathode band Mounting Position Any Weight 0.04gram MAXIMUM RATINGS (at TA=25 C unless otherwise noted) o SYMBOL CONDITIONS PARAMETER Min. Typ. Max. UNITS Forward rectified current See Fig.2 IO 1.0 A Forward surge current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 A Reverse current VR=VRRM TA=250C IR 0 VR=VRRM TA=100 C Junction to ambient RthJA 60 Junction to case RthJC 30 Diode junction capacitance F=1MHz and applied 4vDC reverse voltage CJ 15 Thermal resistance Storage temperature TSTG *1 *2 -55 *3 VRRM (V) VRMS (V) A1 50 35 50 A2 100 70 100 FM4003-M A3 200 140 200 FM4004-M A4 400 280 400 FM4005-M A5 600 420 600 FM4006-M A6 800 560 800 FM4007-M A7 1000 700 1000 SYMBOLS MARKING CODE FM4001-M FM4002-M *1 Repetitive peak reverse peak reverse *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage www.paceleader.tw 1 VR (V) 5.0 A 50 A 0 C/W pF +150 *4 0 C VF (V) Operating Temperature (0C) 1.1 -55 to + 125 FM4001-M thru FM4007-M SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATING AND CHARACTERISTICS CURVES FM4001-M THRU FM4007-M www.paceleader.tw 2