APL5883 300mA Low Dropout Linear Regulator of Adjustable and Fixed 2.85V , 3.3V • • Features • • • • • • General Description Output Voltage Accuracy ± 2.0% Line Regulation - 1mV (typ.) The APL5883 is a 3-pin low dropout linear regulator with 2.0% accuracy of output voltage over line, load and temperature variations. Dropout voltage at 300mA output current is less than 1.2V. Both output current limiting and thermal shutdown are built in to provide maximal protection to the APL5883 against fault conditions. The over current and thermal shutdown circuits become active when the current exceed 300mA, or the junction temperature reach 150°C. Normal operation is recovered when junction temperature drops below 130°C. Load Regulation - 6mV (typ.) Input Voltage Range up to 9V Internal Current Limiting and Thermal Shutdown Adjustable Output : 1.25V ~ 7.75V Available Output Voltages - Ajdustable , 2.85V and 3.3V • Various SOT-89 and TO-92 Packages Available Pin Configuration Applications • • • • Low Voltage Systems Low Dropout Voltage of 1.3V at 300mA Protections • • Portable Consumer Equipment Voltage Regulator for CD-ROM Drivers Voltage Regulator for LAN Cards Wireless Communication Systems 1 Portable Instrument 2 A D J / G N D V IN 3 V OUT 2 V IN 1 A D J/G N D 3 VOUT SOT-89 (Top View) TO-92 (Top View) Ordering and Marking Information P ackage C ode D : S O T -8 9 E : T O -9 2 Tem p. R ange C : 0 to 7 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & R eel V o lta g e C o d e 2 8 : 2 .8 5 V 3 3 : 3 .3 V B la n k : A d ju s ta b le V e r s io n L e a d F re e C o d e L : L e a d F r e e D e v ic e B la n k : O r ig in a l D e v ic e AP L5883L e a d F re e C o d e H a n d lin g C o d e Tem p. R ange P ackage C ode V o lta g e C o d e A P L5883 D : A P L5883 XXXXX XXXXX - D a te C o d e A P L5883 E : APL 5883 XXXXX XXXXX - D a te C o d e A P L 5 8 8 3 -2 8 D : A P L5883 XXXXX28 XXXXX - D a te C o d e A P L 5 8 8 3 -2 8 E : APL 5883 XXXXX28 XXXXX - D a te C o d e A P L 5 8 8 3 -3 3 D : A P L5883 XXXXX33 XXXXX - D a te C o d e A P L 5 8 8 3 -3 3 E : APL 5883 XXXXX33 XXXXX - D a te C o d e ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and drvise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 1 www.anpec.com.tw APL5883 Block Diagram V IN Thermal Shutdown Current Limit - + VOUT V REF GND Absolute Maximum Ratings Symbol VIN Parameter Input Voltage IOUT Output Current TA Operating Ambient Temperature Range TJ Rating 9 Unit V 300 mA 0 to 70 °C Operating Ambient Temperature Range -40 to +150 °C TSTG Storage Temperature Range -65 to +150 °C PD Power Dissipation Package Internal Limited θJA Thermal Resistance Electrical Characteristics Symbol VREF VIN VOUT Parameter Reference Voltage 180 TO- 92 180 Test Condition 1.5V≤( V I N - V O U T )≤ 7. 75 V 10 mA ≤I O U T ≤3 0 0 m A, T J =0 ~1 25 ° C Input Voltage IOUT=10mA VOUT=3.3V , ∆VOUT=2% ISC IQ Quiescent Current VIN=5V , No Load VOUT<0.4V Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 °C / W (TA=25°C, unless otherwise noted) Output Voltage Output Current Capability Short Circuit Current IOUT SOT-89 APL5883 Typ. Max. 1.225 1.250 1.275 V VOUT+1.3V 9 V 0.98 VOUT 1.02 VOUT V 300 mA 500 6 2 Unit Min. mA 10 mA www.anpec.com.tw APL5883 Electrical Characteristics cont. Symbol Parameter (TA=25°C, unless otherwise noted) APL5883 Test Condition Min. Typ. Unit Max. REGLINE Line Regulation IOUT=10mA , VIN=5V to 8V 1 6 mV REGLOAD Load Regulation IOUT=1mA~300mA 6 12 mV 1200 1300 mV VDROPOUT Dropout Voltage IOUT=300mA , ∆VOUT=1% Power Supply Rejection PSRR at 1kHz Ratio Over Temperature OTS Shutdown EN Output Noise Output Voltage TC Temperature Coefficient 55 dB 150 °C 100 µVrms 100 ppm/°C Application Schematic 1.25V to 7V Adjustable Regulator Fixed 2.85 and 3.3V Regulator A P L588 3 V IN IN APL5883 V OUT OUT ADJ IN R1 + R2 VOUT = 1.250V× V OU T O UT G ND + 1µF V IN 1µF 10µF 10µF R1+ R2 R1 Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 3 www.anpec.com.tw APL5883 Typical Characteristics Line Transient Response (CL=1µF, IOUT=1mA) 6 25 6 5 20 5 4 15 4 3 10 (CL=10µF, IOUT=10mA) 20 5 1 0 0 -5 0 10 20 30 40 50 60 70 80 90 100 V IN V OUT 2 0 -10 0 10 20 30 40 50 60 70 80 90100 Time (ns) Load Transient Response 30 15 2.5 10 2 -0.1 5 -0.2 0 -0.3 -5 600 1000 1400 -10 1800 Time (ns) Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 10mA 1mA 50mA Output Voltag (V) V OUT 200 3 20 V IN 0.1 -0.4 -200 3.5 25 0.3 Output Current (A) Output Voltage vs. Input Voltage (CL=10µF, VIN=5V) 0.4 0 0 1 Time (ns) 0.2 10 3 Input Voltage (V) V OUT 2 Output Voltage (mV) Input Voltage (V) V IN Output Voltage (mV) Line Transient Response 300mA 1.5 1 0.5 2 2.5 3 3.5 4 4.5 5 Input Voltage (V) 4 www.anpec.com.tw APL5883 Typical Characteristics (Cont.) Output Voltage vs. Input Voltage Input Current vs. Input Voltage 8 3.35 7 3.33 6 5 Input Current (mA) Output Voltage (V) 3.31 3.29 3.27 3.25 5 6 7 8 9 10 4 3 2 1 0 0 2 4 6 8 10 Input Voltage (V) Input Voltage (V) Short Current vs. Input Voltage Output Voltage vs. Output Current 700 3.35 600 3.33 500 3.31 Output Voltage (V) Short Current (mA) 400 300 200 100 0 0 2 4 6 8 10 3.27 3.25 0 100 200 300 Output Current (mA) Input Voltage (V) Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 3.29 5 www.anpec.com.tw APL5883 Typical Characteristics (Cont.) Short Current vs. Temperature Dropout Voltage vs. Output Current 550 1240 540 1220 1200 530 520 1160 Short Current (mA) Dropout Voltage (mV) 1180 1140 1120 1100 1080 1060 0 50 100 150 200 250 510 500 490 480 30 -50 100 150 Input Current vs. Temperature Output Voltage vs. Temperature 3 .3 5 9 3 .3 4 8 3 .3 7 3 .3 2 6 3 .3 1 5 Short Current (mA) 3 .3 0 Output Voltage (V) 50 Temperature ( ° C) Output Current (mA) 3 .2 9 3 .2 8 3 .2 7 3 .2 6 3 .2 5-5 0 0 0 50 100 150 3 2 1 0 -5 0 0 50 100 150 Temperature ( °C) Temperature (°C) Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 4 6 www.anpec.com.tw APL5883 Packaging Information TO-92 3 J e e1 2 D 1 L1 Q b2 b S L2 A S E L SEATING PLANE Dim Millimeters Min. Max. Inches Min. Max. A 4.58 5.33 0.170 0.210 φ b 0.41 0.53 0.160 0.021 φ b2 0.41 0.48 0.160 0.019 φ D E 4.96 5.20 0.175 0.205 3.94 4.19 0.125 0.165 e 2.42 2.66 0.095 0.105 e1 1.15 1.39 0.045 0.055 J 3.43 0.135 L 12.70 0.500 L1 1.27 L2 6.35 Q 2.93 S 2.42 Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 0.050 0.250 0 . 11 5 2.66 7 0.080 0.105 www.anpec.com.tw APL5883 Packaging Information SOT-89 (Reference EIAJ ED-7500A Reg stration SC-62) D D1 a E H 1 2 3 L C B1 B e e1 A a D im A B B1 C D D1 e e1 E H L α M illim eters M in. 1.40 0.40 0.35 0.35 4.40 1.35 Inches M ax. 1.60 0.56 0.48 0.44 4.60 1.83 M in. 0.055 0.016 0.014 0.014 0.173 0.053 1.50 B SC 3.00 B SC 2.29 3.75 0.80 Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 M ax. 0.063 0.022 0.019 0.017 0.181 0.072 0.059 BSC 0.118 B SC 2.60 4.25 1.20 10° 8 0.090 0.148 0.031 0.102 0.167 0.047 10° www.anpec.com.tw APL5883 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) tp TP C ritical Zone T L to T P T e m p e ra tu re R am p-up TL tL T sm ax T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Average ramp-up rate 3°C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100°C - Temperature Mix (Tsmax) 150°C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183°C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5°C Time within 5°C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6°C/second max. 6 minutes max. Time 25°C to Peak Temperature Pb-Free Assembly Large Body Small Body 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds 245 +0/-5°C 250 +0/-5°C 10-30 seconds 20-40 seconds 6°C/second max. 8 minutes max. Note: All temperatures refer to topside of the package. Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 9 www.anpec.com.tw APL5883 Reliability test Program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B, A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245° C , 5 SEC 1000 Hrs Bias @ 125 ° C 168 Hrs, 100 % RH , 121 ° C -65° C ~ 150 ° C , 200 Cycles VHBM > 2KV, VMM > 200V 10ms , Itr > 100mA Carrier Tape & Reel Dimensions t D P Po E P1 Bo F W Ao D1 Ko T2 J C A B T1 Application A B SOT-89 178 ±1 70 ± 2 Application F D SOT-89 5.5 ± 0.05 1.5± 0.1 C 13.5 ± 0.15 D1 1.5± 0.1 J T1 T2 3 ± 0.15 14 ± 2 1.3 ± 0.3 Po P1 Ao 4.0 ± 0.1 2.0 ± 0.1 4.8 ± 0.1 W 12 + 0.3 12 - 0.1 Bo P E 8 ± 0.1 1.75± 0.1 Ko t 4.5± 0.1 1.80± 0.1 0.3±0.013 (mm) Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 10 www.anpec.com.tw APL5883 Cover Tape Dimensions Application SOT- 89 Carrier Width 12 Cover Tape Width 9.3 Devices Per Reel 1000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. B.2 - Apr., 2003 11 www.anpec.com.tw