FDD6030BL N-Channel PowerTrenchTM MOSFET General Description Features This N-Channel Logic level MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize the onstate resistance and yet maintain low gate charge for superior switching performance. • RDS(ON) = 0.025 Ω @ VGS = 4.5 V. Applications • • 35 A, 30 V. RDS(ON) = 0.018 Ω @ VGS = 10 V • Low gate charge. • Fast switching speed. • High performance trench technology for extremely low RDS(ON). DC/DC converter Motor drives D D G G S TO-252 Absolute Maximum Ratings Symbol S o T C=25 C unless otherwise noted Parameter Ratings Units VDSS Drain-Source Voltage 30 V VGSS Gate-Source Voltage V ID Maximum Drain Current (Note 1) ±20 35 (Note 1a) 9 Maximum Drain Current PD TJ, T stg -Continuous -Pulsed A 100 Maximum Power Dissipation @ T C = 25oC (Note 1) 44 TA = 25oC (Note 1a) 2.8 T A = 25oC (Note 1b) W 1.3 -55 to +150 °C (Note 1) 2.8 (Note 1b) 96 °C/W °C/W Operating and Storage Junction Temperature Range Thermal Characteristics RθJC Thermal Resistance, Junction-to- Case RθJA Thermal Resistance, Junction-to- Ambient Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity FDD6030BL FDD6030BL 13’’ 16mm 2500 1999 Fairchild Semiconductor Corporation FDD6030BL Rev. A FDD6030BL April 1999 ADVANCE INFORMATION Symbol o TC=25 C unless otherwise noted Parameter Test Conditions Min Typ Max Units OFF CHARACTERISTICS BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA IDSS Zero Gate Voltage Drain Current VDS = 24 V, VGS = 0 V IGSSF Gate-Body Leakage, Forward VGS = 20 V, VDS = 0 V 100 µA nA IGSSR Gate-Body Leakage, Reverse VGS = -20 V, VDS = 0 V -100 nA 3 V 0.018 0.025 Ω ON CHARACTERISTICS 30 V 1 (Note 2) VGS(TH) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(ON) Static Drain-Source On-Resistance VGS = 10 V, ID = 9 A VGS = 4.5 V, ID = 7.5 A 1 DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS IS Maximum Continuous Drain-Source Diode Forward Current 2.3 A VSD Drain-Source Diode Forward Voltage 1.3 V VGS = 0 V, IS = 2.3 A Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient resistance where the case thermal reference is defined as the drain tab. RθJC is guaranteed by design while RθJA is determined by the user's board design. a) RθJA= 45oC/W when mounted on a b) RθJA= 96oC/W when mounted on a 1in2 pad of 2oz copper. minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% FDD6030BL Rev. A FDD6030BL Electrical Characteristics D-PAK (TO-252) Packaging Configuration: Figure 1.0 N Packaging Description: TO-252 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2500 units per 13” or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). This and some other options are further described in the Packaging Information table. EL ECT ROST AT IC SEN SIT IVE DEVICES DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms Antistatic Cover Tape ESD Label These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F63TNR Label FZ9935 FDD 6680 FZ9935 FDD 6680 FZ9935 FDD 6680 FZ9935 FDD 6680 D-PAK (TO-252) Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Standard (no flow code) TNR D-PAK (TO-252) Unit Orientation 2,500 13” Dia Reel Size Box Dimension (mm) 359x359x57 Max qty per Box 5,000 Weight per unit (gm) 0.300 Weight per Reel(kg) 1.200 359mm x 359mm x 57mm Standard Intermediate box ESD Label Note/Comments F63TNR Label sample F63TNR Label LOT: CBVK741B019 QTY: 2500 FSID: FDD6680 SPEC: CBVK741B019 FDD6680 D/C1: Z9942 D/C2: QTY1: QTY2: 3000 SPEC REV: CPN: N/F: F (F63TNR)3 TO-252 (D-PAK) Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 640mm minimum or 80 empty pockets Leader Tape 1680mm minimum or 210 empty pockets D-PAK (TO-252) Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type TO252 (24mm) A0 B0 6.90 +/-0.10 10.50 +/-0.10 W 16.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.5 +/-0.10 1.75 +/-0.10 F 14.25 min 7.50 +/-0.10 P1 P0 8.0 +/-0.1 4.0 +/-0.1 K0 2.65 +/-0.10 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). T Wc 0.30 +/-0.05 0.06 +/-0.02 0.9mm maximum 10 deg maximum Typical component cavity center line B0 13.0 +/-0.3 Tc 0.9mm maximum 10 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) D-PAK (TO-252) Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA W3 13” Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Size 164mm Reel Option 13” Dia Dim A Dim B 13.00 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 4.00 100 Dim W1 0.646 +0.078/-0.000 16.4 +2/0 Dim W2 0.882 22.4 Dim W3 (LSL-USL) 0.626 – 0.764 15.9 – 19.4 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. D