HS3AB - HS3MB SURFACE MOUNT HIGH EFFICIENCY RECTIFIER DIODES VOLTAGE RANGE: 50 - 1000V CURRENT: 3.0 A Features ! Low cost ! Diffused junction ! Ultra fast switching for high efficiency ! Low reverse leakage current ! ! ! Low forward voltage drop B High current capability The plastic material carries UL recognition 94V-0 A Mechanical Data ! ! ! ! ! SMB(DO-214AA) Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Dim Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 C D J G E H Maximum Ratings and Electrical Characteristics All Dimensions in mm TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTICS SYMBOL HS3AB HS3BB HS3DB HS3GB HS3JB HS3KB HS3MB UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward @TA =55 ℃ Rectified Current I(AV) 3.0 A IFSM 150 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 3.0A DC(Note1) Maximum DC Reverse Current @TJ=25℃ at Rated DC Blocking Voltage @TJ=100℃ Maximum Reverse Recovery Time(Note 1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range VF 1.3 1.0 1.7 5.0 IR V uA 100 TRR 50 75 nS CJ 50 30 pF 20 ℃/W TJ -50 to +150 ℃ TSTG -50 to +150 ℃ R JA NOTES: 1.Measured with IF=0.5A，IR=1A ，IRR=0.25A 2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC 3.Thermal resistance junction to ambient 1 of 2 www.sunmate.tw FIG. 1 – FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT (AMPERES） AVERAGE FORWARD CURRENT AMPERES 3.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 200 150 100 50 SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 175 1 2 10 20 50 100 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE (℃) FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3 – TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT (AMPERES) 1000 HS3AB - HS3GB 100 CAPACITANCE (pF) 5 HS3JB - HS3MB 10 T J = 25°C f = 1 MHz HS 10 3GB HS3AB - HS3DB HS3JB-HS3MB 1.0 TJ = 25°C PULSE WIDTH 300us 0.1 1 0.1 1.0 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) REVERSE VOLTAGE (VOLTS) 2 of 2 www.sunmate.tw