Rectron D45H8 10 amperes complementary silicon power transistors 60,80 volt Datasheet

10 AMPERES COMPLEMENTARY
SILICON POWER TRANSISTORS 60,80 VOLTS
NPN
D44H SERIES
PNP
D45H SERIES
FEATURES
* ...for general purpose power amplification and switching
such as output or driver stages in applications such as
switching regulators, converter and power ampifiers.
* Low Collector-Emitter Saturation Voltage
VCE(sat) = 1.0 V (max.) @8.0A
* Fast Switching Speeds
* Complementary Pairs Simplifies Designs
TO-220AB
.190 (4.82)
.147 (3.73)
.142 (3.61)
.405 (10.28)
.120 (3.04)
.100 (2.54)
.380 (9.66)
.160 (4.07)
.055 (1.39)
.045 (1.15)
4
.255 (6.47)
.235 (5.97)
.620 (15.75)
.570 (14.48)
.050 (1.27)
.000 (0.00)
1
2
3
.045 (1.15)
min.
.155 (3.93)
.110 (2.80)
.562 (14.27)
.060 (1.52)
.045 (1.15)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
O
Ratings at 25 C ambient temperature unless otherwise specified.
.500 (12.70)
.035 (0.88)
.025 (0.64)
.105 (2.66)
.095 (2.42)
.025 (0.64)
.018 (0.46)
.210 (5.33)
.190 (4.83)
1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
.110 (2.79)
.080 (2.04)
Dimensions in inches and (millimeters)
MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted )
RATINGS
Collector-Emitter voltage
SYMBOL
VCEO
D44H or D45H
8
10, 11
60
80
UNITS
V
VEB
5
V
Collector current-Continutious
-Peak (Note 1)
IC
10
20
A
Collector Power dissipation @TC=25OC
@TA=25OC
Pd
5.0
1.67
W
Emitter-Base voltage
Thermal Resistance
Lead Temperature for Soldering Purposes:
1/8" from case for 5 sec.
Operating and Storage Junction Temperature Range
Notes: 1. Pulse Width < 6.0mS, Duty Cycle < 50%
2. "Fully RoHS Compliant", "100% Sn Plating (Pb-free)".
RqJA
75
RqJC
2.5
TL
260
o
C
TJ, Tstg
-55 to +150
o
C
o
C/W
VD 2007-11
ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted )
CHARACTERISTICS
Collector cutoff current (VCE= Rated VCEO,VBE= 0)
Emitter cutoff current (VEB= 5Vdc)
SYMBOL
MIN
TYP
MAX
UNITS
ICES
-
-
10
uA
IEBO
DC current gain (VCE= 1.0V,IC= 2.0Adc)
DC current gain (VCE= 1.0V,IC= 4.0Adc)
Collector-emitter saturation voltage (IC= 8.0Adc,IB= 0.4Adc)
(IC= 8.0Adc,IB= 0.8Adc)
D44H10,D45H10
D44H8,11 D45H8,11
D44H10,D45H10
D44H8,11 D45H8,11
D44H/D45H8,11
D44H/D45H10
D44H Series
D45H Series
Gain Bandwidth Product (IC= 0.5Adc, VCE= 10Vdc, f=20 MHz)
D44H Series
D45H Series
Delay and Rise Times (IC= 5.0Adc, IB1= 0.5Adc)
D44H Series
D45H Series
Storage Time (IC= 5.0Adc, IB1=IB2= 0.5Adc)
D44H Series
D45H Series
Fall Time (IC= 5.0Adc, IB1=IB2= 0.5Adc)
hFE
VCE(sat)
VBE(sat)
Base-emitter saturation voltage (IC= 8.0Adc,IB= 0.8Adc)
Collector Capacitance (VCB= 10V, ftest= 1.0 MHz)
hFE
D44H Series
D45H Series
Ccb
fT
td + tr
ts
tf
-
-
100
uA
35
-
-
-
60
-
-
-
20
-
-
-
40
-
-
-
-
-
1.0
V
-
-
1.0
V
-
-
1.5
V
-
130
-
pF
-
230
-
pF
-
50
-
MHz
-
40
-
MHz
-
300
-
nS
-
135
-
nS
-
500
-
nS
-
500
-
nS
-
140
-
nS
-
100
-
nS
VD 2007-11
RATING AND CHARACTERISTICS CURVES (D44H and D45H Series)
IC, COLLECTOR CURRENT, (A)
200
100
TJ=150OC
50
1mS
20
10
100uS
5.0
2.0
1.0
10uS
TC < 70OC
DUTY CYCLE < 50%
0.5
0.2
1.0
DC
1.0uS
D44H/45H8
D44H/45H10,11
2.0
3.0
5.0 7.0
10
20
30
50
VCE, COLLECTOR-EMITTER VOLTAGE, (V)
70 100
Figure Maximum Rated Forward Bias
Safe Operating Area
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
Similar pages