DCMW10 SERIES 10 Watts DC/DC Converter Single & Dual Outputs Rev A FEATURES • • • • • 4:1 Wide Input Range SIP Package High Efficiency 100% Burned In Customized Solutions Available APPLICATIONS • Medical • Industrial • ITE Applications Size: 1.27in x 0.35in x 0.60in (32.2mm x 9mm x 15.2mm) • • • • Short Circuit Protection UL94V-0 Package Material RoHS Compliant Designed to Meet AAMI/CSA 60601-1, IEC/EN60601-1 3.1 Edition DESCRIPTION The DCMW10 series of DC/DC converters offers up to 10 watts of output power in a compact 1.27” x 0.35” x 0.60” SIP package. This series consists of single and dual output models with a wide 4:1 input range. Features of this series include high efficiency, short circuit protection, and UL94V-0 package material. This series is RoHS compliant, has been 100% burned-in and is designed to meet AAMI/CSA 606011, IEC/EN60601-1 3.1 edition. Please contact factory for order details. MODEL SELECTION TABLE Single Output Models Model Number DCMW10-24S03 DCMW10-24S05 DCMW10-24S12 DCMW10-24S15 DCMW10-48S03 DCMW10-48S05 DCMW10-48S12 DCMW10-48S15 Input Voltage Range 24VDC (9~36VDC) 48VDC (18~75) Output Voltage Output Current 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC 2500mA 2000mA 833mA 670mA 2500mA 2000mA 833mA 670mA Input Current No Load Max. Load 50mA 503mA 50mA 508mA 30mA 502mA 30mA 505mA 30mA 252mA 30mA 254mA 20mA 251mA 20mA 252mA Efficiency 82% 82% 83% 83% 82% 82% 83% 83% Output Power 10W 10W MODEL SELECTION TABLE Dual Output Models Model Number DCMW10-24D05 DCMW10-24D12 DCMW10-24D15 DCMW10-48D05 DCMW10-48D12 DCMW10-48D15 10/20/2017 Input Voltage Range 24VDC (9~36VDC) 48VDC (18~75) Output Voltage Output Current ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±1000mA ±420mA ±340mA ±1000mA ±420mA ±340mA Input Current No Load Max. Load 30mA 502mA 30mA 506mA 30mA 512mA 20mA 251mA 20mA 253mA 20mA 256mA Efficiency 83% 83% 83% 83% 83% 83% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Output Power 10W 10W Page 1 of 4 DCMW10 SERIES 10 Watts DC/DC Converter Single & Dual Outputs Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS 24VDC Nominal Input 48VDC Nominal Input Input Voltage Range Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation 9 18 24 36 48 75 Pi Network See Table ±2 ±0.5 ±0.5 ±0.5 ±5 See Table See Table 100 1 350 Full Load @Vin(nom.) Single Outputs Dual (Balanced Load) Dual (25% to 100% Load) Load Regulation Cross Regulation Output Power Output Current Ripple & Noise BW=DC to 20MHz Transient Response Setting Time PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage Isolation Resistance PHYSICAL SPECIFICATIONS Weight 25% Load Step Change 3-15VDC Output Models >15VDC Output Models VDC % % % % mVp-p % of Vout us Hiccup, Automatic Recovery With derating -40 -55 100 125 95 Free Air Convection Non-Condensing MIL-HDBK-217F@25ºC ºC ºC % 700,000 Hours See Table 400 3000 500VDC KHz VAC MΩ 1000 0.44oz (12.5g) 1.27in x 0.35in x 0.60in (32.2mm x 9mm x 15.2mm) Plastic Dimensions (L x W x H) Case Material SAFETY CHARACTERISTICS Safety Approvals Designed to Meet AAMI/CSA 60601-1 IEC/EN60601-1 3.1 Edition NOTES *Due to advances in technology, specifications subject to change without notice. DERATING CURVES 10/20/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 DCMW10 SERIES 10 Watts DC/DC Converter Single & Dual Outputs Rev A MECHANICAL DRAWINGS Pin 1 2 3 9 10 11 12 Pin Assignment Single Dual -Vin -Vin +Vin +Vin Remote ON/OFF Remote ON/OFF NC NC +Vout +Vout -Vout Common NC -Vin UNIT: mm Tolerances unless otherwise specified: ±0.25 RECOMMENDED TEST CIRCUIT Single Outputs Dual Outputs 10/20/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DCMW10 SERIES 10 Watts DC/DC Converter Single & Dual Outputs COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 10/20/2017 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4