Miniature Aluminum Electrolytic Capacitors NRE-SW Series SUPER-MINIATURE, RADIAL LEADS, POLARIZED FEATURES • HIGH PERFORMANCE IN LOW PROFILE (7mm) HEIGHT • GOOD 100KHz PERFORMANCE CHARACTERISTICS • WIDE TEMPERATURE -55 TO + 105OC Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current After 1 minutes Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test 1,000 @ 105°C includes all homogeneous materials *See Part P Number N b System S for f Details D il CHARACTERISTICS Max. Tan δ at 120Hz/20°C RoHS Compliant 6.3 ~ 50VDC 1.0 ~ 330μF -55°C ~ +105°C ±20% (M) .01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ at 120Hz Z-40°C/Z+20°C Z-55°C/Z+20°C Δ Capacitance Δ Tan δ Δ LC 6.3 8 0.24 4 6 10 16 25 35 13 20 32 44 0.21 0.18 0.14 0.12 3 2 2 2 5 4 3 3 Within ±25% of initial measured value Less than 200% of specified value Less than specified value STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm) Cap. (μF) Code 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 1R0 2R2 3R3 4R7 100 220 330 470 101 221 331 6.3 4x7 5x7 5x7 6.3x7 6.3x7 6.3x7 Working Voltage (Vdc) 10 16 25 35 4x7 4x7 4x7 5x7 5x7 5x7 5x7 6.3x7 6.3x7 5x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 - 50 63 0.10 2 3 LEAD SPACING & DIAMETER (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α Dim. β 50 4x7 4x7 4x7 5x7 6.3x7 6.3x7 6.3x7 6.3x7 - 4 0.45 1.5 5 0.45 2.0 0.5 1.0 6.3 0.45 2.5 DIMENSIONS (mm) Polarity Marking Sleeve + dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α Drawing is representative of parts as supplied in bulk or straight lead format, please see taping specification for details on taped format packaging. PART NUMBER SYSTEM NRE-SW 100 M 35V 5x5 TB F RoHS Compliant Tape and Box* Size (D∅xL) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Miniature Aluminum Electrolytic Capacitors NRE-SW Series STANDARD VALUES, SPECIFICATIONS AND CASE SIZES (mm) Part Number NRE-SW220M6.3V4x7F NRE-SW330M6.3V5x7F NRE-SW470M6.3V5x7F NRE-SW101M6.3V6.3x7F NRE-SW221M6.3V6.3x7F NRE-SW331M6.3V6.3x7F NRE-SW220M10V5x7F NRE-SW330M10V5x7F NRE-SW470M10V6.3x7F NRE-SW101M10V6.3x7F NRE-SW221M10V6.3x7F NRE-SW100M16V4x7F NRE-SW220M16V5x7F NRE-SW330M16V6.3x7F NRE-SW470M16V6.3x7F NRE-SW101M16V6.3x7F NRE-SW221M16V6.3x7F NRE-SW4R7M25V4x7F NRE-SW100M25V5x7F NRE-SW220M25V6.3x7F NRE-SW330M25V6.3x7F NRE-SW470M25V6.3x7F NRE-SW101M25V6.3x7F NRE-SW4R7M35V4x7F NRE-SW100M35V5x7F NRE-SW220M35V6.3x7F NRE-SW330M35V6.3x7F NRE-SW470M35V6.3x7F NRE-SW101M35V6.3x7F NRE-SW1R0M50V4x7F NRE-SW2R2M50V4x7F NRE-SW3R3M50V4x7F NRE-SW4R7M50V5x7F NRE-SW100M50V6.3x7F NRE-SW220M50V6.3x7F NRE-SW330M50V6.3x7F NRE-SW470M50V6.3x7F Cap. (μF) 22 33 47 100 220 330 22 33 47 100 220 10 22 33 47 100 220 4.7 10 22 33 47 100 4.7 10 22 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 W.V. (Vdc) 6.3 10 16 25 35 50 Dissipation Factor Ripple Current Rating (mA) +20°C/120Hz +105°C/100KHz 0.24 50 0.24 85 0.24 85 0.24 120 0.24 120 0.24 120 0.21 85 0.21 85 0.21 120 0.21 120 0.21 120 0.18 50 0.18 85 0.18 120 0.18 120 0.18 120 0.18 120 0.14 50 0.14 85 0.14 120 0.14 120 0.14 120 0.14 120 0.12 40 0.12 70 0.12 100 0.12 100 0.12 100 0.12 100 0.10 30 0.10 35 0.10 40 0.10 70 0.10 100 0.10 100 0.10 100 0.10 100 Max. ESR (Ω) +20°C/100KHz 4.2 2.0 2.0 1.2 1.2 1.2 4.2 2.0 1.2 1.2 1.2 4.2 2.0 1.2 1.2 1.2 1.2 4.2 2.0 1.2 1.2 1.2 1.5 6.0 3.1 1.6 1.6 1.6 1.6 10.0 7.8 6.2 3.1 1.6 1.6 1.6 1.6 Load Life Hours @+105°C 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 RIPPLE CURRENT CORRECTION FACTORS Frequency (Hz) 4x7 5x7 6.3x7 2 120 0.50 0.60 0.70 1K 0.70 0.80 0.85 10K 0.93 0.93 0.93 <100K 1.00 1.00 1.00 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com