T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps HP SunPower Series HLMP-ELxx HLMP-EJxx HLMP-EHxx HLMP-EGxx Technical Data Features Applications • Well Defined Spatial Radiation Patterns • Viewing Angles: 6°, 15°, 23°, 30° • High Luminous Output • Colors: 590 nm Amber 605 nm Orange 615 nm Reddish-Orange 626 nm Red • High Operating Temperature: TJ LED = +130°C • Superior Resistance to Moisture • Package Options: With or Without Lead StandOffs • Traffic Management: Traffic Signals Pedestrian Signals Work Zone Warning Lights Variable Message Signs • Commercial Outdoor Advertising: Signs Marquees • Automotive: Exterior and Interior Lights Benefits • Viewing Angles Match Traffic Management Sign Requirements • Colors Meet Automotive and Pedestrian Signal Specifications • Superior Performance in Outdoor Environments • Suitable for Autoinsertion onto PC Boards Description These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology. These LED lamps are untinted, nondiffused, T-13/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130°C enables high temperature operation in bright sunlight conditions. The package epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight. These lamps are available in two package options to give the designer flexibility with device mounting. The HLMP-Exxx Series replace the HLMP-Dxxx and HLMP-Uxxx series products. A cross reference is found on page 10 of this data sheet. 2 Part Numbering Scheme HLMP-E(1)(2)(3)(4)(5)(6)(7)(8) where (1) = Color “L” =592 nm Amber “J” =605 nm Orange “H” =615 nm Reddishorange “G” =626 nm Red where (2)(3) = Viewing Angle and Lead Standoffs “08” =6 degree without lead standoffs “10” =6 degree with lead standoffs “15” =15 degree without lead standoffs “17” =15 degree with lead standoffs “24” =23 degree without lead standoffs “26” =23 degree with lead standoffs “30” =30 degree without lead standoffs “32” =30 degree with lead standoffs where (4) = Minimum Intensity Bin (refer to table on page 9) where (5) = Maximum Intensity Bin (refer to table on page 9) where (6) = Color Bin Selection “0” = no color bin limitation “K” =amber color bins 2 and 4 only (refer to table on page 9) “4” =amber color bin 4 only (refer to table on page 9) where (7)(8) = Mechanical or Packaging Option “00” =bulk packaging, minimum increment 500/bag “DD”=ammo pack, minimum increment 2000/box. Available for products shown in BOLD in selection guide. Refer to the device selection guides for available combinations. Device Selection Guide Typical Viewing Angle 2θ 1/ 2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EL08-SV000 HLMP-EL10-SV000 1650 6300 HLMP-EL08-TW000 HLMP-EL10-TW000 2170 8300 HLMP-EL08-UW000 2750 8300 HLMP-EL08-UWK00* 2750 8300 2750 10700 HLMP-EL08-UXK00* 2750 10700 HLMP-EL08-VW000 3600 8300 HLMP-EL08-VWK00* 3600 8300 HLMP-EL08-VX000 3600 10700 HLMP-EL08-VX400** 3600 10700 HLMP-EL08-VXK00* 3600 10700 3600 13800 3600 13800 HLMP-EL08-UX000 6°[5] Amber 590 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. Lamps Without Standoffs on Leads (Outline Drawing A) HLMP-EL08-VY000 HLMP-EL08-VYK00* Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. HLMP-EL10-UX000 HLMP-EL10-VY000 Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 3 Device Selection Guide (Continued) Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Orange 605 Red-Orange 615 6°[5] Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EJ08-TW000 HLMP-EJ10-TW000 2170 8300 HLMP-EJ08-UX000 HLMP-EJ10-UX000 2750 10700 HLMP-EJ08-VY000 HLMP-EJ10-VY000 3600 13800 HLMP-EJ08-WZ000 HLMP-EJ10-WZ000 4700 18400 HLMP-EH08-SV000 HLMP-EH10-SV000 1650 6300 HLMP-EH08-TW000 HLMP-EH10-TW000 2170 8300 HLMP-EH08-UX000 HLMP-EH10-UX000 2750 10700 HLMP-EH08-VY000 HLMP-EH10-VY000 3600 13800 HLMP-EG08-SV000 HLMP-EG10-SV000 1650 6300 HLMP-EG08-TW000 HLMP-EG10-TW000 2170 8300 2750 8300 HLMP-EG08-UW000 Red 626 Amber 590 HLMP-EG08-UX000 2750 10700 HLMP-EG08-VW000 3600 8300 HLMP-EG08-VX000 3600 10700 HLMP-EG10-UX000 HLMP-EG08-VY000 HLMP-EG10-VY000 3600 13800 HLMP-EL15-PS000 HLMP-EL17-PS000 765 2900 HLMP-EL15-QR000 1000 2200 HLMP-EL15-QRK00* 1000 2200 HLMP-EL15-QS000 1000 2900 HLMP-EL15-QS400** 1000 2900 HLMP-EL15-QSK00* 1000 2900 1000 3700 HLMP-EL15-QT000 15° HLMP-EL17-QT000 HLMP-EL15-QTK00* Orange 605 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. Lamps Without Standoffs on Leads (Outline Drawing A) 1000 3700 HLMP-EL15-RU000 HLMP-EL17-RU000 1300 4800 HLMP-EL15-SV000 HLMP-EL17-SV000 1650 6300 HLMP-EJ15-PS000 HLMP-EJ17-PS000 765 2900 HLMP-EJ15-QT000 HLMP-EJ17-QT000 1000 3700 HLMP-EJ15-RU000 HLMP-EJ17-RU000 1300 4800 HLMP-EJ15-SV000 HLMP-EJ17-SV000 1650 6300 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 4 Device Selection Guide (Continued) Typical Viewing Angle 2θ 1/ 2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Red-Orange 615 15° Red 626 Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EH15-PS000 HLMP-EH17-PS000 765 2900 HLMP-EH15-QT000 HLMP-EH17-QT000 1000 3700 HLMP-EH15-RU000 HLMP-EH17-RU000 1300 4800 HLMP-EH15-SV000 HLMP-EH17-SV000 1650 6300 HLMP-EG15-PS000 HLMP-EG17-PS000 765 2900 HLMP-EG15-QT000 HLMP-EG17-QT000 1000 3700 HLMP-EG15-RU000 HLMP-EG17-RU000 1300 4800 HLMP-EG15-SV000 HLMP-EG17-SV000 1650 6300 HLMP-EL24-LP000 HLMP-EL26-LP000 345 1330 HLMP-EL24-MQ000 HLMP-EL26-MQ000 450 1730 590 1730 HLMP-EL24-NQ000 HLMP-EL24-NQK00* 590 1730 590 2200 HLMP-EL24-NRK00* 590 2200 HLMP-EL24-PQ000 765 1730 HLMP-EL24-PQK00* 765 1730 HLMP-EL24-PR000 765 2200 HLMP-EL24-PR400** 765 2200 HLMP-EL24-PRK00* 765 2200 765 2900 765 2900 HLMP-EL24-NR000 Amber 590 HLMP-EL24-PS000 23° HLMP-EL26-NR000 HLMP-EL26-PS000 HLMP-EL24-PSK00* Orange 605 Red-Orange 615 Red 626 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. Lamps Without Standoffs on Leads (Outline Drawing A) HLMP-EJ24-MQ000 HLMP-EJ26-MQ000 450 1730 HLMP-EJ24-NR000 HLMP-EJ26-NR000 590 2200 HLMP-EJ24-PS000 HLMP-EJ26-PS000 765 2900 HLMP-EJ24-QT000 HLMP-EJ26-QT000 1000 3700 HLMP-EH24-LP000 HLMP-EH26-LP000 345 1330 HLMP-EH24-MQ000 HLMP-EH26-MQ000 450 1730 HLMP-EH24-NR000 HLMP-EH26-NR000 590 2200 HLMP-EH24-PS000 HLMP-EH26-PS000 765 2900 HLMP-EG24-LP000 HLMP-EG26-LP000 345 1330 HLMP-EG24-MQ000 HLMP-EG26-MQ000 450 1730 HLMP-EG24-NR000 HLMP-EG26-NR000 590 2200 HLMP-EG24-PS000 HLMP-EG26-PS000 765 2900 5 Device Selection Guide (Continued) Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EL30-LP000 HLMP-EL32-LP000 345 1330 HLMP-EL30-MQ000 HLMP-EL32-MQ000 450 1730 HLMP-EL30-NQ000 590 1730 HLMP-EL30-NQK00* 590 1730 590 2200 HLMP-EL30-NRK00* 590 2200 HLMP-EL30-PQ000 765 1730 HLMP-EL30-PQK00* 765 1730 HLMP-EL30-PR000 765 2200 HLMP-EL30-PR400** 765 2200 HLMP-EL30-PRK00* 765 2200 HLMP-EL30-NR000 Amber 590 HLMP-EL30-PS000 HLMP-EL32-NR000 HLMP-EL32-PS000 HLMP-EL30-PSK00* 30° Orange 605 Red-Orange 615 765 2900 765 2900 HLMP-EJ30-MQ000 HLMP-EJ32-MQ000 450 1730 HLMP-EJ30-NR000 HLMP-EJ32-NR000 590 2200 HLMP-EJ30-PS000 HLMP-EJ32-PS000 765 2900 HLMP-EJ30-QT000 HLMP-EJ32-QT000 1000 3700 HLMP-EH30-KN000 HLMP-EH32-KN000 270 1000 HLMP-EH30-LP000 HLMP-EH32-LP000 345 1330 HLMP-EH30-MQ000 HLMP-EH32-MQ000 450 1730 HLMP-EH30-NR000 HLMP-EH32-NR000 590 2200 HLMP-EG30-KN000 HLMP-EG32-KN000 270 1000 345 1000 345 1330 HLMP-EG30-MN000 450 1000 HLMP-EG30-MP000 450 1330 HLMP-EG30-LN000 HLMP-EG30-LP000 Red 626 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. Lamps Without Standoffs on Leads (Outline Drawing A) HLMP-EG32-LP000 HLMP-EG30-MQ000 HLMP-EG32-MQ000 450 1730 HLMP-EG30-NR000 HLMP-EG32-NR000 590 2200 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 6 Package Dimensions 5.00 ± 0.20 (0.197 ± 0.008) A 8.71 ± 0.20 (0.343 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) B 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD 1.00 MIN. (0.039) CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS. 4. RECOMMENDED PC BOARD HOLE DIAMETERS: • LAMP PACKAGE A WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF LAMP PACKAGE = 1.143/1.067 (0.044/0.042). • LAMP PACKAGE B WITH STAND-OFFS: MOUNTING AT LEAD STAND-OFFS = 0.965/0.889 (0.038/0.035). 5. FOR DOME HEIGHTS ABOVE LEAD STAND-OFF SEATING PLANE, d, LAMP PACKAGE B, SEE TABLE. 2.54 ± 0.38 (0.100 ± 0.015) PART NO. d HLMP-XX10 12.37 ± 0.25 (0.487 ± 0.010) HLMP-XX17 12.42 ± 0.25 (0.489 ± 0.010) HLMP-XX26 12.52 ± 0.25 (0.493 ± 0.010) HLMP-XX32 11.96 ± 0.25 (0.471 ± 0.010) 7 Absolute Maximum Ratings at TA = 25°C DC Forward Current[1,2,3] ............................................................ 50 mA Peak Pulsed Forward Current [2,3] .............................................. 100 mA Average Forward Current[3] ......................................................... 30 mA Reverse Voltage (I R = 100 µA) ......................................................... 5 V LED Junction Temperature .......................................................... 130°C Operating Temperature .............................................. -40°C to +100°C Storage Temperature .................................................. -40°C to +120°C Dip/Drag Soldering Temperature ........................... 260°C for 6 seconds Through-the-Wave Preheat Temperature ...................................... 145°C Through-the-Wave Solder Temperature ................. 245°C for 3 seconds [1.59 mm (0.060 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to HP Application Brief I-024 (5966-3087E). 3. Please contact your Hewlett-Packard sales representative about operating currents below 10 mA. Electrical/Optical Characteristics at TA = 25°C Parameter Forward Voltage Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) Reverse Voltage Peak Wavelength: Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) Spectral Halfwidth Symbol Min. Typ. 5 2.02 1.98 1.94 1.90 20 VF VR Max. Units 2.4 V V ∆λ1/2 592 609 621 635 17 Speed of Response τs 20 ns Capacitance Thermal Resistance C RθJ-PIN 40 240 pF °C/W Luminous Efficacy[1] Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) λPEAK ηv 480 370 260 150 nm nm lm/W Test Conditions IF = 20 mA IF = 100 µA Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA Exponential Time Constant, e -t/τ s VF = 0, f = 1 MHz LED Junction-to-Cathode Lead Emitted Luminous Power/Emitted Radiant Power Note: 1. The radiant intensity, Ie, in watts per steradian, may be found from the equation I e = Iv/ηv, where I v is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 8 1.0 RELATIVE INTENSITY ORANGE IF – FORWARD CURRENT – mA RED-ORANGE AMBER RED 0.5 50 40 RθJA = 585° C/W 30 RθJA = 780° C/W 20 10 0 0 550 600 650 700 0 WAVELENGTH – nm 100 60 80 100 100 90 RELATIVE INTENSITY – % 90 80 CURRENT – mA 40 Figure 4. Maximum Forward Current vs. Ambient Temperature. Derating Based on T JMAX = 130 °C. Figure 1. Relative Intensity vs. Peak Wavelength. 70 60 RED 50 40 AMBER 30 20 10 80 70 60 50 40 30 20 10 0 1.0 1.5 2.0 2.5 0 -25 3.0 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES VF – FORWARD VOLTAGE – V Figure 5. Representative Spatial Radiation Pattern for 6 ° Viewing Angle Lamps. Figure 2. Forward Current vs. Forward Voltage. 100 3.0 90 RELATIVE INTENSITY – % RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 20 TA – AMBIENT TEMPERATURE – °C 2.5 2.0 1.5 1.0 0.5 0 80 70 60 50 40 30 20 10 0 20 40 IF – DC FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. Forward Current. 60 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES Figure 6. Representative Spatial Radiation Pattern for 15° Viewing Angle Lamps. 9 100 RELATIVE INTENSITY – % 90 80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES Figure 7. Representative Spatial Radiation Pattern for 23° Viewing Angle Lamps. 100 RELATIVE INTENSITY – % 90 80 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES Figure 8. Representative Spatial Radiation Pattern for 30° Viewing Angle Lamps. Intensity Bin Limits (mcd at 20 mA) HLMP-xLxx Color Bin Limits (nm at 20 mA) Bin Name Min. Max. Bin Name Min. Max. K 310 400 1 584.5 587.0 L M 400 520 520 680 2 587.0 589.5 4 589.5 592.0 N 680 880 6 592.0 594.5 P Q 880 1150 1150 1500 R 1500 1900 S T 1900 2500 2500 3200 U 3200 4200 V 4200 5500 W X 5500 7200 7200 9300 Y 9300 12000 Z 12000 16000 Tolerance for each bin limit is ± 15%. Tolerance for each bin limit is ± 0.5 nm. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 10 Part Number Cross Reference Hewlett-Packard Precision Optical Performance T-13/4 AlInGaP II lamps part numbers are changing. The advantages of the new part numbering system include: - specification of maximum intensities - for comparison/substitution purposes, easier recognition of parts which are the same color and viewing angle, but differ only in intensity and/or color bin selection In each case, except for HLMP-DL24 and DL26, the new part number is an exact replacement for the old part number. Old Part Number New Part Number HLMP-DG08 HLMP-DG10 HLMP-EG08-UX000 HLMP-EG10-UX000 HLMP-DG15 HLMP-EG15-RU000 HLMP-DG17 HLMP-EG17-RU000 HLMP-DG24 HLMP-DG26 HLMP-EG24-PS000 HLMP-EG26-PS000 HLMP-DG30 HLMP-EG30-MQ000 HLMP-DG32 HLMP-DH08 HLMP-EG32-MQ000 HLMP-EH08-UX000 HLMP-DH10 HLMP-EH10-UX000 HLMP-DH15 HLMP-DH17 HLMP-EH15-RU000 HLMP-EH17-RU000 HLMP-DH24 HLMP-EH24-PS000 HLMP-DH26 HLMP-EH26-PS000 HLMP-DH30 HLMP-DH32 HLMP-EH30-MQ000 HLMP-EH32-MQ000 HLMP-DJ08 HLMP-EJ08-WZ000 HLMP-DJ10 HLMP-DJ15 HLMP-EJ10-WZ000 HLMP-EJ15-RU000 HLMP-DJ17 HLMP-EJ17-RU000 HLMP-DJ24 HLMP-EJ24-QT000 HLMP-DJ26 HLMP-DJ30 HLMP-EJ26-QT000 HLMP-EJ30-PS000 HLMP-DJ32 HLMP-EJ32-PS000 HLMP-DL08 HLMP-DL10 HLMP-EL08-VY000 HLMP-EL10-VY000 HLMP-DL15 HLMP-EL15-SV000 HLMP-DL17 HLMP-DL24 HLMP-EL17-SV000 HLMP-EL25-QT000 or HLMP-EL24-PS000* HLMP-DL26 HLMP-EL27-QT000 or HLMP-EL26-PS000* HLMP-DL30 HLMP-EL30-PS000 HLMP-DL32 HLMP-EL32-PS000 *The new parts are not exact replacements for HLMP-DL2x. HLMP-EL2x-QT000 are AlInGaP II lamps of equivalent intensity. HLMP-EL2x-PS000 are AlInGaP lamps of slightly lower intensity. 11 Old Part Number New Part Number HLMP-UG06 HLMP-UG07 HLMP-EG08-SV000 HLMP-EG10-SV000 HLMP-UG13 HLMP-EG15-PS000 HLMP-UG14 HLMP-EG17-PS000 HLMP-UG22 HLMP-UG23 HLMP-EG24-LP000 HLMP-EG26-LP000 HLMP-UG28 HLMP-EG30-KN000 HLMP-UG29 HLMP-UH06 HLMP-EG32-KN000 HLMP-EH08-SV000 HLMP-UH07 HLMP-EH10-SV000 HLMP-UH13 HLMP-UH14 HLMP-EH15-PS000 HLMP-EH17-PS000 HLMP-UH22 HLMP-EH24-LP000 HLMP-UH23 HLMP-EH26-LP000 HLMP-UH28 HLMP-UH29 HLMP-EH30-KN000 HLMP-EH32-KN000 HLMP-UJ06 HLMP-EJ08-TW000 HLMP-UJ07 HLMP-UJ13 HLMP-EJ10-TW000 HLMP-EJ15-PS000 HLMP-UJ14 HLMP-EJ17-PS000 HLMP-UJ22 HLMP-EJ24-MQ000 HLMP-UJ23 HLMP-UJ28 HLMP-EJ26-MQ000 HLMP-EJ30-MQ000 HLMP-UJ29 HLMP-EJ32-MQ000 HLMP-UL06 HLMP-UL07 HLMP-EL08-SV000 HLMP-EL10-SV000 HLMP-UL13 HLMP-EL15-PS000 HLMP-UL14 HLMP-UL22 HLMP-EL17-PS000 HLMP-EL24-MQ000 HLMP-UL23 HLMP-EL26-MQ000 HLMP-UL28 HLMP-EL30-LP000 HLMP-UL29 HLMP-EL32-LP000 www.hp.com/go/led For technical assistance or the location of your nearest Hewlett-Packard sales office, distributor or representative call: Americas/Canada: 1-800-235-0312 or 408-654-8675 Far East/Australasia: Call your local HP sales office. Japan: (81 3) 3335-8152 Europe: Call your local HP sales office. Data subject to change. Copyright © 1999 Hewlett-Packard Co. Obsoletes 5968-2279E (10/98) 5968-3820E (1/99)