Document 352-1 SMT Power Inductors - LPO3310 • Only 1.0 mm high, 3.3 mm square • Handles current up to 2.8 Amps Designer’s Kit C375 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 28.0 – 31.3 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +110°C with derated current Storage temperature Component: –40°C to +110°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: ≤1.65 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. 1. When ordering, please specify termination and packaging codes: Part number1 L2 DCR3 SRF4 ±20% max typ (µH) (Ohms) (MHz) Isat5 (A) Irms6 (A) LPO3310-301ML_ LPO3310-471ML_ LPO3310-701ML_ LPO3310-102ML_ LPO3310-152ML_ LPO3310-222ML_ LPO3310-332ML_ LPO3310-472ML_ LPO3310-682ML_ LPO3310-822ML_ LPO3310-103ML_ LPO3310-153ML_ LPO3310-223ML_ LPO3310-333ML_ LPO3310-473ML_ 0.30 0.47 0.70 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 22 33 47 2.8 2.3 1.9 1.6 1.4 1.1 0.95 0.80 0.66 0.65 0.57 0.45 0.37 0.30 0.25 2.8 2.3 1.9 1.6 1.4 1.1 0.95 0.80 0.66 0.65 0.57 0.45 0.37 0.30 0.25 0.040 0.042 0.068 0.076 0.12 0.15 0.20 0.28 0.36 0.50 0.52 0.80 1.20 1.78 2.15 420 310 200 180 153 112 91 80 68 58 52 36 34 27 22 LPO3310-473MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at which the inductance drops 10% (typ) from its value without current. 6. Current that causes a 25°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 352-1 Revised 10/14/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 352-2 SMT Power Inductors - LPO3310 Series Typical L vs Frequency Typical L vs Current 100 100 47 µH 10 µH 10 Inductance (µH) Inductance (µH) 47 µH 1.0 µH 1 10 10 µH 1 1.0 µH 0.3 µH 0.3 µH 0.1 0.1 0.01 1 0.1 10 0.01 1 0.1 Frequency (MHz) 10 Current (A) Irms Derating 0.130 ±0.008 3,3 ±0,2 120 XXX X 110 90 Dash number 80 70 Internal code 0.130 ±0.008 3,3 ±0,2 60 0.040 ±0.004 1,0 ± 0,1 50 Recommended Land Pattern 0.056 1,42 40 25°C Percent of rated Irms 100 Winding direction 30 20 0.148 3,76 10 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature (°C) 0.040 ±0.05 1,02 ±0,127 Dimensions are in 0.106 2,68 inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 352-2 Revised 10/14/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.