Ironwood LS-BGA724A-05 Primary dimension units are millimeter Datasheet

PROPRIETARY AND CONFIDENTIAL - THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF IRONWOOD ELECTRONICS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF IRONWOOD ELECTRONICS, INC. IS PROHIBITED.
42.725
33.00
*Note: BGA pattern is not symmetrical
with respect to the mounting holes. It is
shifted 0.375 to the right of center.
2.7375
2.50
2.50
0.85 (x2)
2.363
16.3225
33.00
13.7825
ITEM NO.
2
TOP VIEW
18.8625
37.725
DESCRIPTION
QTY.
1
Thru Hole Adaptor Board
1
2
#0-80 internal Thread brass insert,
Press fit
8
3
0.8mm pitch terminal pin
736
1.00
typ
1
5.588
2.4130
0.20 typ
3
FRONT VIEW
Description: LS-BGA724A-05
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
LS-BGA724A-05 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 10.66
STATUS: Released
SHEET: 1 OF 1
REV. A
ENG: J. Vavra
DRAWN BY: M. Raske
SCALE: 2:1
FILE: LS-BGA724A-05 Dwg
DATE: 01/02/2015
Similar pages