VER:03 1 / 2 • 1.5 WATTS REGULATED OUTPUT POWER • LOW OUTPUT RIPPLE & NOISE • PI TYPE INPUT FILTER • 500VDC ISOLATION VOLTAGE • HIGH EFFICIENCY UP TO 55% • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • FIVE-SIDED EMI SHIELD The DR1P5 series offer 1.5 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible to MKC03 series. DR1P5 series have input voltage of 4.5-5.5, 10.8-13.2 and 21.6-26.4VDC. DR1P5 features 500VDC of isolation voltage. A safety designed meet to EN60950-1 and UL60950-1. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Output power 1.5 Watts max Voltage accuracy Full load and nominal Vin ± 4% Minimum load 0% Line regulation LL to HL at Full Load D05 output others Load regulation 25% to 100% FL Cross regulation Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Temperature coefficient See table Isolation voltage 500VDC, min Isolation resistance 10 ohms, min 9 ± 0.3% Isolation capacitance 30pF, max ± 1.5% ± 0.5% Switching frequency 20KHz, min ± 5% Design meet safety standard IEC60950-1, UL60950-1,EN60950-1 50mVp-p Case material Nickel-coated copper ±0.02% / ºC, max Base material Non-conductive black plastic Short circuit protection Short term Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 16g (0.55oz) 18g (0.62oz) Dimensions INPUT SPECIFICATIONS 5V nominal input 12V nominal input 24V nominal input Input voltage range Efficiency 4.5 – 5.5VDC 10.8 – 13.2VDC 21.6 – 26.4VDC Input filter Pi type Weight DIP SMD 6 MTBF (Note 1) 5.531 x 10 hrs ENVIRONMENTAL SPECIFICATIONS Operating temperature range -25ºC ~ +71ºC Maximum case temperature +100ºC OUTPUT POWER (%) Storage temperature range -55ºC ~ +105ºC Thermal impedance DR1P5-24S05 Derating Curve Nature convection Thermal shock 100 10~55Hz, 10G, 30minutes along X,Y and Z Relative humidity 50 0 -40 -25 -10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (ºC) Conducted emissions EN55022 Class A Radiated emissions EN55022 Class A ESD EN61000-4-2 Perf. Criteria B Radiated immunity EN61000-4-3 Perf. Criteria A Fast transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted immunity EN61000-4-6 Perf. Criteria A RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS 5% to 95% RH EMC CHARACTERISTICS Nature convection 25 RSG MIL-STD-810D Vibration 75 20ºC/watt ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■ VER:03 (3) 2 / 2 Model Number Input Range Output Voltage Output Current Input Current (2) Eff (%) Capacitor Load max(4) DR1P5-05S05 DR1P5-05S12 DR1P5-05S15 DR1P5-05D05 DR1P5-05D12 DR1P5-05D15 DR1P5-12S05 DR1P5-12S12 DR1P5-12S15 DR1P5-12D05 DR1P5-12D12 DR1P5-12D15 DR1P5-24S05 DR1P5-24S12 DR1P5-24S15 DR1P5-24D05 DR1P5-24D12 DR1P5-24D15 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 600mA 625mA 588mA 682mA 613mA 600mA 245mA 260mA 245mA 278mA 255mA 250mA 125mA 130mA 123mA 142mA 128mA 125mA 54 52 55 48 51 54 55 52 55 49 51 54 54 52 55 48 51 54 470uF 330uF 330uF 330uF 110uF 110uF 470uF 330uF 330uF 330uF 110uF 110uF 470uF 330uF 330uF 330uF 110uF 110uF Note 1.00(25.4) 0.01 x 0.02 (0.25 x 0.50) 20 Pin Area 0.04 x 0.02 (1.0 x 0.5) 0.60(15.2) 0.40 (10.2) 1 BOTTOM 0.43(10.9) 5 VIEW 1. All dimensions in Inches (mm) 16 9 13 12 0.80(20.3) 0.25 (6.35) 10 11 12 0.15 (3.8) 24 0.44(11.2) 1.26 (32.0) 0.02(0.5) 0.90 (22.9) 15 14 13 0.10 (2.5) 1 2 3 24 23 22 0.15 (3.81) 0.92(23.4) Rectangular Pin 0.08(2.0) 0.10 (2.54) BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Suffix-SMD Test by minimum Vin and constant resistive load. 1.25 (31.8) 1. 2. 3. 4. Tolerance x.xx±0.02(x.x±0.5) 0.80(20.3) x.xxx±0.01(x.xx±0.25) 2. Pin pitch tolerance ±0.014(0.35) DIP PIN CONNECTION SMD PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL 1 2 3 10 11 12 + INPUT NC NC -OUTPUT +OUTPUT - INPUT + INPUT - OUTPUT COMMON COMMON +OUTPUT - INPUT 24 23 22 15 14 13 + INPUT NC NC - OUTPUT +OUTPUT - INPUT + INPUT - OUTPUT COMMON COMMON +OUTPUT - INPUT RSG PIN ELECTRONIC COMPONENTS DUAL PIN SINGLE RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ SINGLE DUAL 1 + INPUT + INPUT 24 + INPUT + INPUT 2 NC - OUTPUT 23 NC - OUTPUT 3 NC COMMON 22 NC COMMON 15 -OUTPUT COMMON 10 -OUTPUT COMMON 11 +OUTPUT +OUTPUT 14 +OUTPUT +OUTPUT 12 - INPUT - INPUT 13 - INPUT - INPUT Others NC NC Others NC NC ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■