® HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE WON-TOP ELECTRONICS Pb Features Glass Passivated Die Construction Low Leakage Low Cost High Surge Current Capability Typical IR less than 5.0µA C-Band Terminal Construction Anode + C Mechanical Data Dim D Case: 12mm Hitachi Type Press-Fit Terminals: Contact Areas Readily Solderable Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R) Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity Mounting Position: Any Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 B A 12mm Hitachi Min Max A 11.80 12.00 B 3.65 3.85 C 1.35 1.55 D (+)* 18.00 22.00 D (-)* 20.00 24.00 All Dimensions in mm (+)*: Standard Polarity (-)*: Reverse Polarity Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Unit VRRM VRWM VR 50 100 200 300 400 500 600 V VR(RMS) 35 70 140 210 280 350 420 V IO 25 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 300 A Forward Voltage @IF = 25A VFM 1.0 V @TA = 25°C @TA = 100°C IRM 5.0 500 µA CJ 300 pF RθJC 1.2 °C/W TJ, TSTG -65 to +175 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 120°C HD2500 HD2501 HD2502 HD2503 HD2504 HD2505 HD2506 Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled. © Won-Top Electronics Co., Ltd. Revision: April, 2012 www.wontop.com 1 ® HD2500 – HD2506 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity HD2500 12mm Hitachi Press-Fit 500 Units/Box HD2501 12mm Hitachi Press-Fit 500 Units/Box HD2502 12mm Hitachi Press-Fit 500 Units/Box HD2503 12mm Hitachi Press-Fit 500 Units/Box HD2504 12mm Hitachi Press-Fit 500 Units/Box HD2505 12mm Hitachi Press-Fit 500 Units/Box HD2506 12mm Hitachi Press-Fit 500 Units/Box 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, HD2500-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 2 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: April, 2012