Ordering number : ENN6909 CPH3314 P-Channel Silicon MOSFET CPH3314 Ultrahigh-Speed Switching Applications Features • • Package Dimensions Low ON-resistance. Ultrahigh-speed switching. 4V drive. unit : mm 2152A [CPH3314] 2.9 0.15 0.4 0.6 3 0.2 • 2 1 0.6 1.6 2.8 0.05 1.9 0.7 0.9 0.2 1 : Gate 2 : Source 3 : Drain Specifications SANYO : CPH3 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --30 V Gate-to-Source Voltage VGSS ±20 V ID --1.6 A Drain Current (DC) Drain Current (Pulse) IDP PD Allowable Power Dissipation PW≤10µs, duty cycle≤1% --6.4 A 1 W Mounted on a ceramic board (900mm2✕0.8mm) Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS Conditions typ Unit max ID=--1mA, VGS=0 VDS=--30V, VGS=0 VGS=±16V, VDS=0 --30 VGS(off) yfs VDS=--10V, ID=--1mA VDS=--10V, ID=--0.8A --1.2 RDS(on)1 RDS(on)2 ID=--0.8A, VGS=--10V ID=--0.4A, VGS=--4V 185 pF 30 pF 20 pF IDSS IGSS Input Capacitance Ciss Output Capacitance Coss VDS=--10V, f=1MHz VDS=--10V, f=1MHz Reverse Transfer Capacitance Crss VDS=--10V, f=1MHz Marking : JP Ratings min V 1.0 --1 µA ±10 µA --2.6 V 210 270 mΩ 360 500 mΩ 1.5 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 11801 TS IM TA-3064 No.6909-1/4 CPH3314 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Turn-ON Delay Time td(on) See specified Test Circuit 7 Rise Time tr td(off) See specified Test Circuit 4 ns See specified Test Circuit 22 ns Turn-OFF Delay Time Fall Time tf Qg Total Gate Charge See specified Test Circuit ns 8 ns VDS=--10V, VGS=--10V, ID=--1.6A 4.7 nC 0.8 nC Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd VDS=--10V, VGS=--10V, ID=--1.6A VDS=--10V, VGS=--10V, ID=--1.6A Diode Forward Voltage VSD IS=--1.6A, VGS=0 0.7 nC --0.9 --1.5 V Switching Time Test Circuit VDD= --15V VIN 0V --10V ID= --0.8A RL=18.7Ω VIN D VOUT PW=10µs D.C.≤1% G P.G CPH3314 50Ω S --1.8 V --4 --0.8 --0.6 --0.4 --0.2 --0.2 0 0 C 25° --0.4 °C --0.6 --1.0 5°C --0.8 --1.2 --25 V GS= --3V --1.4 Ta= 7 --1.2 --1.0 VDS= --10V --1.6 V --1.4 --1 0 Drain Current, ID -- A --1.6 ID -- VGS --2.0 Drain Current, ID -- A --8 V --1.8 --6 --5 V V ID -- VDS --2.0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V --0.9 0 --1.0 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 Gate-to-Source Voltage, VGS -- V RDS(on) -- VGS 800 --0.5 IT02665 --4.0 IT02666 RDS(on) -- Ta 600 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Ta=25°C 700 600 500 ID= --0.4A --0.8A 400 300 200 100 0 0 --1 --2 --3 --4 --5 --6 --7 --8 Gate-to-Source Voltage, VGS -- V --9 --10 IT02667 500 V --4 S= 400 , VG 0.4A -I D= V 300 0.8A, I D= -- --10 V GS= 200 100 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- °C 120 140 160 IT02668 No.6909-2/4 CPH3314 yfs -- ID 7 5° C 5 = Ta --2 °C 25 °C 75 3 2 3 2 --0.1 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 0 5 --1.2 --1.4 IT02670 f=1MHz 3 Ciss, Coss, Crss -- pF tf td(on) --1.0 5 td(off) 7 --0.8 7 2 10 --0.6 Ciss, Coss, Crss -- VDS 1000 7 --0.4 Diode Forward Voltage, VSD -- V VDD= --15V VGS= --10V 3 --0.2 IT02669 SW Time -- ID 100 Switching Time, SW Time -- ns --1.0 7 5 2 Drain Current, ID -- A 5 tr Ciss 2 100 7 5 3 3 Coss 2 2 Crss 1.0 10 3 5 7 --0.1 2 3 5 7 2 --1.0 Drain Current, ID -- A 3 0 --10 7 5 3 2 Drain Current, ID -- A --8 --4 --2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Total Gate Charge, Qg -- nC 5.0 IT02673 PD -- Ta 1.2 --20 --25 --30 IT02671 ASO IDP= --6.4A <10µs 10 1m 0µs s 10 ID= --1.6A ms 10 0m --1.0 7 5 DC --0.1 7 5 s op era Operation in this area is limited by RDS(on). 3 2 3 2 0 --15 Drain-to-Source Voltage, VDS -- V VDS= --10V ID= --1.6A --6 --10 --5 IT02672 VGS -- Qg --10 Gate-to-Source Voltage, VGS -- V 3 2 3 0.1 --0.01 Allowable Power Dissipation, PD -- W VGS=0 Ta=75 °C 25°C --25°C VDS= --10V 2 1.0 IF -- VSD --10 7 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 3 tio n Ta=25°C Single pulse Mounted on a ceramic board(900mm2✕0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Drain-to-Source Voltage, VDS -- V 2 3 5 IT02675 1.0 M ou nt 0.8 ed on ac er am ic 0.6 bo ar 0.4 d( 90 0m m2 ✕ 0.8 m 0.2 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT02674 No.6909-3/4 CPH3314 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2001. Specifications and information herein are subject to change without notice. PS No.6909-4/4