Air to Liquid Thermoelectric Assembly ATS PART# ATS-FW-72W-12-C ATS’ air to liquid heat exchanger is a thermoelectric assembly that has a tube attached to the cold side in order to remove heat from the fluid flow in the tube. The cooled fluid can be used to remove heat from areas wherethe TEC assembly does not fit into. FEATURES & BENEFITS » Compact and lightweight » Virtually maintenance free » Can be mounted in any orientation » Simple quick installation » No compressor » Uses thermoelectrics » Air to liquid heat exchanger SPECIFICATION Max Cooling power 72W @ ∆T = 0°C TEC Voltage 12 VDC TEC Current 9A Fan Voltage 24 VDC Fan Current 0.6A (each) For Illustration Purposes ONLY. APPLICATIONS » Electronics cooling » Medical, surgical and biological process cooling » Thermal management » Medical equipment » Laser diode coolers » Laboratory instruments » Gas steam dehumidification Product Detail Max Cooling Power TEC Voltage TEC Current 72W 12V 9A Hot Side Fan 92x92x25 mm 12V 0.2A Cold Side Fan Operational Temperature Dimensions (mm) Weight NA -10° – 70° 190x94x104.3 1.8 Kgs NOTES: 1. 2. 3. 4. 5. Please use 24 VDC power supply with the ripple less than 10% Please do not drop, or the TEC can get damaged. Please keep 10cm distance from walls for proper ventilation when mounting. Please do not use it when temperature of the assembly or environment is higher than 70°C. ∆T = Tinlet fluid - Tambient 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM