8.0 Amp Glass Passivated Power Fast Recovery Rectifier Data Sheet Mechanical Dimensions .185(4.70) .175(4.44) MAX.412(10.5) DIA .140(3.56) .130(3.30) FRF80G~810G .113(2.87) .103(2.62) .594(15.1) .587(14.9) PIN 2 .037(0.94) .027(0.68) MAX.0.05(1.5) 1 .16(4.06) .14(3.56) .56(14.22) .53(13.46) .11(2.79) .10(2.54) .025(0.64) .014(0.35) .205(5.20) .195(4.95) 1 1.25(3.18) 1.15(2.92) .27(6.86) .23(5.84) Description 2 ITO-220AC Dimensions in inches and (millimeters) Mechanical Data ¬ Case: Molded plastic ITO-220AC ¬ Epoxy: UL 94V-0 rate flame retardant ¬ Terminals: Solderable per MIL-STD-202 method 208 ¬ Polarity:Color band denotes cathode ¬ Mounting position: Any ¬ Weight: 1.16 grams Features ¬ Fast switching for high efficiency ¬ Low forward voltage drop ¬ High current capability ¬ Low reverse leakage current ¬ High surge current capability MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL FRF 80G FRF 81G FRF 82G FRF 84G FRF 86G FRF 88G Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=100 C FRF UNIT 810G IF(AV) 8.0 A IFSM 150 A VF 1.3 V 10.0 uA 250 uA Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 8.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range 250 150 pF 65 R JC 2.2 TJ, TSTG -55 to + 150 NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to case. nS 500 o CW o C 8.0 Amp Glass Passivated Power Fast Recovery Rectifier Data Sheet RATINGS AND CHARACTERISTIC CURVES FRF80G THRU FRF810G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 125 100 75 50 25 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=125 C 100 10 o TJ=25 C 1 0.1 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 1.0 4.0 10 REVERSE VOLTAGE, VOLTS 100