Pericom NX5031D 2.5/3.3v lvds xo Datasheet

Ultra Low Jitter LVDS Crystal Oscillator 5.0 x 3.2mm
NX503
2.5/3.3V LVDS XO
5.0 x 3.2mm Ceramic SMD
Package: (Scale: none, Dimensions are in mm)
Product Features
Recommended Land Pattern:
• Very low phase jitter - < 1.0ps RMS max.
• Wide frequency range - 5 ~ 1000MHz
• Thicker crystal for improved reliability
• Low supply current - 70mA max.
• Industrial Temperature Range
• Pb-free & RoHS compliant
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Product Description
The NX503 XO series is a high performance
LVDS crystal oscillator family with very
low jitter performance. It supports various
options including wider frequency range,
2.5/3.3 voltage, various stabilities, and
different package sizes. It is designed to
meet the clock source specifications for
communication systems, and other high
performance equipment.
Pin Functions:
Pin
Function
1
OE Function
2
N/C
3
Ground
4
Q
5
Q
6
VCC
Applications
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
• Networking systems
• Servers and storage systems
• Profession video equipments
• Test and measurement
Part Ordering Information:
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
NX 50 3 V
• FPGA/ASIC clock generation
A
Voltage:
1=+3.3V
2=+2.5V
SaRonix-eCera™ is a Pericom® Semiconductor company
•
I
B
FFFF.FFFFFF
C
Stability and Temp Range:
Stability
A = +/-20 ppm
B = +/-25 ppm
C = +/-50 ppm
D = +/-25 ppm
E = +/-50 ppm
Frequency:
Temp Range
-20/+70°C
-20/+70°C
-20/+70°C
-40/+85°C
-40/+85°C
US: +1-408-232-9100 TW: +886-3-4518888
FFFF.FFFFFF
MHz, “4 digits/decimal/6 digits” format
•
www.pericom.com
14-0028
All specifications are subject to change without notice.
NX503
Rev B
08/13/14
1
NX503
2.5/3.3V LVDS XO
Ultra Low Jitter LVDS Crystal Oscillator 5.0 x 3.2mm
Electrical Performance
Parameter
Min.
Typ.
Max.
Units
1000
MHz
3.135
3.3
3.465
2.375
2.5
2.625
Output Frequency
5
Supply Voltage
Supply Current, Output Enabled
V
70
Notes
See ordering options
mA
Supply Current, Output Disabled only
40
mA
Frequency Stability
±50
ppm
See ordering options
+85
°C
See ordering options
Operating Temperature Range
-40
Output Logic 0, VOL
0.9
1.1
V
1.43
Output Logic 1, VOH
Output Load
1.6
V
100Ω connected between outputs
Differential Output Voltage. VOD
Output requires termination
0.247
0.454
V
45
55
%
400
ps
Measured 20/80% of waveform
6
ps
20.000 adjacent periods
Duty Cycle
Rise and Fall Time
Jitter, Accumulated , RMS (1-σ)
Measured 50% VCC
< 40MHz
0.4
1
ps
12kHz to 5 MHz frequency band
40 to 1000MHz
0.4
1
ps
12kHz to 20 MHz frequency band
125MHz, 156.25MHz
0.4
0.6
ps
12kHz to 20 MHz frequency band
40
ps
100,000 random periods
Jitter, Phase, RMS
Jitter, pk-pk
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (1 year at 25°C average effective ambient temperature), shock and vibration.
2. Phase jitter typical value is depending on output frequencies.
3. For specifications other than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Min.
Input Voltage (pin 1), Output Enable
Typ.
Max.
Units
0.7 VCC
Input Voltage (pin 1), Output Disable (low power standby)
Notes
V
or open
Output is Hi-Z
0.3 VCC
V
Output Disable Delay
100
ns
Output Enable Delay
100
ns
Start up Time
10
ms
Absolute Maximum Ratings
Parameter
Storage Temperature
Min.
Typ.
-55
Max.
Units
+125
°C
Notes
For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/hiflex-xo/?part=NX503
For test circuit go to: http://www.pericom.com/pdf/sre/tc_lvds.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_5032_xo.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-232-9100 TW: +886-3-4518888
•
www.pericom.com
14-0028
All specifications are subject to change without notice.
NX503
Rev B
08/13/14
2
Similar pages