SP4T RF Switch 50Ω 5 to 2700 MHz JSW4-272DR+ High Power 3W The Big Deal • • • • High Port count in super small size Single Positive Supply Voltage, 2.5 – 4.8V High Power P0.1dB, 3W typ. Low Insertion Loss, 0.6 dB at 1 GHz CASE STYLE: MT1817 Product Overview JSW4-272DR+ is a high power reflective SP4T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator. Its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense PCB layouts. Key Features Feature Advantages Wideband operation 5-2700 MHz Enables a single component to be used in a vast array of applications from VHF up to 2.7 GHz. High IIP3: 55 dBm typ. Results in little or negligible inter-modulation generation, meeting requirements for digital communication signals. Low Loss, 0.6 dB at 1 GHz High input power, 3W Low loss and high power capability enable a single switch to be used for a variety of applications, saving inventory. Built in negative voltage generator Operates with a single positive supply voltage; no need for DC blocking capacitors, unless external DC is present at the RF ports. Built-in CMOS driver No need for external driver, saving PCB space and cost. Tiny MCLP package 2 x 2mm, 14-lead Provides low inductance, repeatable transitions, and excellent thermal contact to PCB. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 7 SP4T RF Switch 50Ω 5-2700 MHz Reflective RF Switch with internal driver. Single Supply Voltage, +2.5V to +4.8V, High Power 3W Product Features • High Isolation, 37 dB typ. at 1 GHz • Low insertion loss, 0.6 dB typ. at 1 GHz • High IP3, 59 dBm typ. at 1 GHz • Low current consumption, 40 µA typ. • High Power, P0.1dB 3W typ. JSW4-272DR+ CASE STYLE: MT1817 Typical Applications +RoHS Compliant • CATV systems • SATCOM system • Automated Test Stations • Telecom systems The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications General Description JSW4-272DR+ is a high power 3W reflective SP4T switch with integral driver, operates with single positive supply voltage while consuming, 40 µA typical. It has been designed for very wideband operation of 5-2700 MHz. It is packaged in a tiny 14-lead 2mm x 2mm x 0.55mm package and is rated MSL1 and class 1B ESD. Simplified Schematic and Pad Description Ground Function Pad Number RF COM 13 RF1 RF2 Ground Function Pad Number RF Common/ SUM Port Control #1 7 Control IN #1 3 RF Out #1/In Port #1 Control #2 6 Control IN #2 9 RF Out #2/In Port #2 Control #3 5 Control IN #3 Ground 2 Ground Externally VDD 4 Supply Voltage Ground 10 Ground Externally Ground Paddle Ground Externally RF3 1 RF Out #5/In Port #5 Not Used 8,12,14 No Connection RF4 11 RF Out #6/In Port #6 Description Description Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M152719 JSW4-272DR+ RS/TH/CP 151105 Page 2 of 7 JSW4-272DR+ SP4T RF Switch RF Electrical Specifications(1), 5 - 2700 MHz, TAMB=25°C, VDD= +2.5 to 4.8V Parameter Condition (MHz) Frequency Range Typ. 5 (2) Insertion Loss Isolation between Common Port and RF1 to RF4 Ports (3) Return Loss (ON STATE) RF-COM, RF1 to RF4 Ports Input IP3 Min. VDD=2.5 to 4.8V VDD=3.0V 0.1dB Input Compression(4) Max. Units 2700 MHz 5 to 1000 — 0.6 0.8 1000 to 2000 — 0.6 0.8 2000 to 2700 — 0.6 0.8 5 to 1000 35 37 — 1000 to 2000 28 30 — 2000 to 2700 25 27 — 5 to 1000 — 15.5 — 1000 to 2000 — 14.2 — 2000 to 2700 — 14.3 — 5 to 500 — 55 — 1000 to 2700 — 59 — 5 to 2700 — 35 — dB dB dB dBm dBm DC Electrical Specifications Parameter VDD, Supply Voltage Min. Typ. Max. 2.5 3.0 4.8 Supply Current (VDD = 3V) Control Voltage Low Control Voltage High(5) Units V 40 µA 0 1.35 Control Current Shutdown Current at VDD = 3V 0.4 V 1.8 2.7 V 0.5 1.0 µA 5 µA Notes: 1. As measured in Mini-Circuit’s test board TB-724-4+ (see Characterization Test Circuit, Fig.1). 2. Insertion loss values are de-embedded from test board loss. 3. Isolations for other port combinations, see Tables 1 & 2 4. Do not exceed RF input power as shown in Absolute Maximum Rating table. 5. If VDD <2.7V, then Max Control Voltage high=VDD Switching Specifications Parameter Min. Rise/Fall Time (10 to 90% or 90 to 10% RF) — Switching Time, 50% CTRL to 90/10% RF — Video Feedthrough, (control 0 to 1.65V, freq.=10 KHz) — Typ. 0.42 (Rise Time) 0.84 (Fall Time) 1.9 (ON Time) 1.4 (OFF Time) 3.0 Max. Units — µSec — µSec — mVP-P Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 7 JSW4-272DR+ SP4T RF Switch Table 1. Isolation Matrix (RF-COM to RF1 to RF4 Ports) Isolation Typ. (dB) Frequency (GHz) RF Com to Port “ON” Port RF1 RF2 RF3 RF4 RF1 0.01-1.0 --- 49 53 49 RF1 1.0-2.0 --- 43 38 43 RF1 2.0-2.7 --- 40 34 39 RF2 0.01-1.0 48 --- 48 50 RF2 1.0-2.0 43 --- 42 38 RF2 2.0-2.7 39 --- 39 33 RF3 0.01-1.0 44 39 --- 40 RF3 1.0-2.0 33 34 --- 34 RF3 2.0-2.7 28 31 --- 31 RF4 0.01-1.0 39 41 40 --- RF4 1.0-2.0 33 32 34 --- RF4 2.0-2.7 31 28 31 --- Table 2. Isolation Matrix (Between Output Ports) Isolation Typ. (dB) Frequency (GHz) From Port “ON” Port & to Port RF1 RF2 RF3 RF4 RF1 0.01-1.0 --- 54 37 55 RF1 1.0-2.0 --- 45 32 46 RF1 2.0-2.7 --- 41 28 42 RF2 0.01-1.0 54 --- 55 37 RF2 1.0-2.0 44 --- 45 32 RF2 2.0-2.7 40 --- 41 29 RF3 0.01-1.0 44 58 --- 48 RF3 1.0-2.0 37 45 --- 40 RF3 2.0-2.7 32 42 --- 37 RF4 0.01-1.0 45 44 48 --- RF4 1.0-1.5 38 37 39 --- RF4 1.5-2.0 36 32 37 --- Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 7 JSW4-272DR+ SP4T RF Switch Absolute Maximum Ratings(6) Parameter Ratings Operating Temperature -40°C to +85°C Storage Temperature -55°C to 150°C VDD, Supply Voltage 5.0V Voltage Control -0.5V Min. 3.0 Max. RF input power(7) 5 Watt 6. Operation of this device above any of these conditions may cause permanent damage. 7. Derate linearly to 2.5W at 85°C. Truth Table(8) (State of control voltage selects the desired switch state) State of Control Voltages Control #1 Control #2 RF Common to Control #3 RF1 RF2 RF3 RF4 L L L ON — — — L L H — ON — — H L L — — ON — H L H — — — ON H H H Shutdown 8. Any control state not defined above, places the switch in an undefined state, but will not damage the switch. Characterization Test Circuit TB-724-4+ R1, R2, R3, R4=1KΩ Figure 1: Block Diagram Of Test Circuit Used For Characterization. (DUT soldered on Mini-Circuits’ TB-724-4+) Test Equipment: For Insertion loss, Isolation, Return loss: Agilent’s N5230A Network Analyzer , E3631A power supply. For Switching Time and Video Feed through Agilent’s HP81110A pulse generator, 54833A Oscilloscope, E3631A power supply. Agilent’s N9020A Spectrum Analyzer, E8257D Generator, E3631A power supply For Compression: R&S Network Analyzer ZVA24, E3631A power supply. Conditions: VDD= +2.5, +3.0 and +4.8V, Control= 0 and 1.35V. For Insertion loss, isolation and return loss: Pin=0 dBm For Input IP3: Pin=+10dBm/tone at VDD=3V Notes A. Performance and qualityFor attributes and conditions stated in this specification document are intended be excluded not form a part of this specification document. Switching time: not RFexpressly frequency: DC at 200mV, Control Frequency: 10toKHz and 0 and anddo+8V. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 7 JSW4-272DR+ SP4T RF Switch Product Marking 14 1 Black Body J6 Model Family Designation Recommended Application Circuit Fig. 2: Evaluation board includes case, connectors and components soldered to PCB. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 6 of 7 JSW4-272DR+ SP4T RF Switch Additional Detailed Technical Information additional information is available on our dash board. To access this information click Performance Data here Data Table Swept Graphs Case Style MT1817 Plastic package; Lead finish: Matte Tin Tape & Reel F108 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500, 1K or 3K devices Suggested Layout for PCB Design PL-462 Evaluation Board TB-724-4+ Environmental Ratings ENV75 ESD Rating Human Body Model (HBM): Class 1B (500 to < 1000V) in accordance with JESD22-A114 Machine Model (MM): Class A (Pass 100V) in accordance with JESD22-A115 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D MSL Test Flow Chart Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, Notes please Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp A. Performance and quality visit attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 7 of 7