Aluminum Electrolytic Capacitors/ FK Surface Mount Type Series: FK Type: V ■ Features ● Endurance: 2000 h to 5000 h at 105 °C ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● AEC-Q200 qualified ✽ ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat –55 °C to +105 °C 6.3 V.DC to 100 V.DC 3.3 μF to 6800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list W.V. (V) 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours) Capacitance change ±30 % of initial measured value (Suffix “G” is 35 %) tan d < 200 % of initial specified value (Suffix “G” is 300 %) DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current 50, 60 0.70 Correction factor Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V V 35 V L Pressure Relief (010 and larger) Rated Voltage Mark Capacitance (μF) K ', Series identification Rated Voltage Mark H J K 2A 50 V 63 V 80 V 100 V (P) (I) A±0.2 K (Unit : mm) B±0.2 Series identification Mark for Lead-Free Products Black Dot (Square) – H 0D±0.5 Capacitance (μF) > 012.5 Lot number 0.3 max. K ', Lot number Negative polarity marking (–) 100 k to 1.00 ■ Dimensions in mm (not to scale) Example:6.3 V 22 μF, 6.3 V 3300 μF Marking color : BLACK < 010 Negative polarity marking (–) 10 k 0.95 + (I) ■ Marking Frequency (Hz) 1k 0.90 120 0.75 W ( ) Reference size Size code B D L A,B I W P K 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 +- 1.5 0.2 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 1.5 0.2 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 +- 1.5 0.2 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 H G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-41 – Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) Case size W.V. (V) Cap. (±20 %) (μF) 22 47 100 220 6.3 330 470 1000 1500 3300 6800 22 33 150 220 10 330 470 680 1000 2200 4700 6800 10 22 47 16 68 100 150 220 330 470 680 1500 3300 4700 10 22 33 47 68 100 25 150 220 330 470 1000 1500 2200 3300 Dia. Length (mm) 4 4 5 5 6.3 6.3 6.3 8 8 8 10 12.5 16 4 4 5 6.3 6.3 8 8 8 8 10 12.5 16 18 4 4 5 5 6.3 6.3 6.3 6.3 6.3 8 8 8 10 12.5 16 18 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 12.5 16 16 18 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code B (B) C (C) D D D8 E F F G H13 J16 B (B) C D D8 E F F F G H13 J16 K16 B (B) C (C) D D D D8 D8 E F F G H13 J16 K16 B C (C) D D D D8 E F F F G H13 J16 J16 K16 Ripple Impedance tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 90 1.35 0.26 EEEFK0J220R 90 1.35 0.26 EEEFK0J470UR 160 0.70 0.26 EEEFK0J470R 160 0.70 0.26 EEEFK0J101UR 240 0.36 0.26 EEEFK0J101P 240 0.36 0.26 EEEFK0J221P 280 0.34 0.26 EEEFK0J331XP 300 0.26 0.26 EEEFK0J331P 600 0.16 0.26 EEEFK0J471P 600 0.16 0.26 EEEFK0J102P 850 0.08 0.26 EEEFK0J152P 1100 0.06 0.30 EEVFK0J332Q 1800 0.035 0.36 EEVFK0J682M 90 1.35 0.19 EEEFK1A220R 90 1.35 0.19 EEEFK1A330UR 160 0.70 0.19 EEEFK1A330R 240 0.36 0.19 EEEFK1A151P 280 0.34 0.19 EEEFK1A221XP 300 0.26 0.19 EEEFK1A221P 600 0.16 0.19 EEEFK1A331P 600 0.16 0.19 EEEFK1A471P 600 0.16 0.19 EEEFK1A681P 850 0.08 0.19 EEEFK1A102P 1100 0.06 0.21 EEVFK1A222Q 1800 0.035 0.25 EEVFK1A472M 2060 0.033 0.29 EEVFK1A682M 90 1.35 0.16 EEEFK1C100R 90 1.35 0.16 EEEFK1C220UR 160 0.70 0.16 EEEFK1C220R 160 0.70 0.16 EEEFK1C470UR 240 0.36 0.16 EEEFK1C470P 240 0.36 0.16 EEEFK1C680P 240 0.36 0.16 EEEFK1C101P 280 0.34 0.16 EEEFK1C151XP 280 0.34 0.16 EEEFK1C221XP 300 0.26 0.16 EEEFK1C221P 600 0.16 0.16 EEEFK1C331P 600 0.16 0.16 EEEFK1C471P 850 0.08 0.16 EEEFK1C681P 1100 0.06 0.16 EEVFK1C152Q 1800 0.035 0.20 EEVFK1C332M 2060 0.033 0.22 EEVFK1C472M 90 1.35 0.14 EEEFK1E100R 160 0.70 0.14 EEEFK1E220R 160 0.70 0.14 EEEFK1E330UR 240 0.36 0.14 EEEFK1E330P 240 0.36 0.14 EEEFK1E470P 240 0.36 0.14 EEEFK1E680P 280 0.34 0.14 EEEFK1E101XP 300 0.26 0.14 EEEFK1E101P 600 0.16 0.14 EEEFK1E151P 600 0.16 0.14 EEEFK1E221P 600 0.16 0.14 EEEFK1E331P 850 0.08 0.14 EEEFK1E471P 1100 0.06 0.14 EEVFK1E102Q 1800 0.035 0.14 EEVFK1E152M 1800 0.035 0.16 EEVFK1E222M 2060 0.033 0.18 EEVFK1E332M Reflow (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) Taping (pcs) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 200 125 2000 2000 1000 1000 900 1000 500 500 500 500 200 125 125 2000 2000 1000 1000 1000 1000 1000 900 900 1000 500 500 500 200 125 125 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 200 125 125 125 ✽ Size code( ):Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-42 – Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) Case size W.V. (V) Cap. (±20 %) (μF) 4.7 10 22 33 47 68 35 100 150 220 330 470 680 1000 1500 4.7 10 22 33 47 50 100 150 220 330 390 470 560 680 1000 4.7 10 22 63 33 47 68 100 150 220 470 680 3.3 4.7 10 80 22 33 47 68 100 150 330 470 Dia. Length (mm) 4 4 5 5 6.3 6.3 6.3 6.3 8 8 8 10 12.5 12.5 16 16 4 5 6.3 6.3 6.3 8 6.3 8 8 10 10 12.5 12.5 16 16 16 16 5 6.3 6.3 8 8 8 8 10 12.5 12.5 16 18 5 6.3 6.3 8 8 8 10 12.5 12.5 12.5 16 18 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 7.7 6.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 13.5 13.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code B (B) C C D D D8 D8 F F F G H13 H13 J16 J16 B (C) D D D8 E D8 E F G G H13 H13 J16 J16 J16 J16 C D D8 E F F (F) G H13 H13 J16 K16 C D D8 E F F G H13 H13 H13 J16 K16 Ripple Impedance tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 90 1.35 0.12 EEEFK1V4R7R 90 1.35 0.12 EEEFK1V100UR 160 0.70 0.12 EEEFK1V100R 160 0.70 0.12 EEEFK1V220R 240 0.36 0.12 EEEFK1V330P 240 0.36 0.12 EEEFK1V470P 280 0.34 0.12 EEEFK1V680XP 280 0.34 0.12 EEEFK1V101XP 600 0.16 0.12 EEEFK1V101P 600 0.16 0.12 EEEFK1V151P 600 0.16 0.12 EEEFK1V221P 850 0.08 0.12 EEEFK1V331P 1100 0.06 0.12 EEVFK1V471Q 1100 0.06 0.12 EEVFK1V681Q 1800 0.035 0.12 EEVFK1V102M 1800 0.035 0.12 EEVFK1V152M 60 2.90 0.10 EEEFK1H4R7R 85 1.52 0.10 EEEFK1H100UR 165 0.88 0.10 EEEFK1H100P 165 0.88 0.10 EEEFK1H220P 195 0.68 0.10 EEEFK1H330XP 195 0.68 0.10 EEEFK1H330P 195 0.68 0.10 EEEFK1H470XP 195 0.68 0.10 EEEFK1H470P 350 0.34 0.10 EEEFK1H101P 670 0.18 0.10 EEEFK1H151P 670 0.18 0.10 EEEFK1H221P 900 0.12 0.10 EEVFK1H331Q 900 0.12 0.10 EEVFK1H391Q 1610 0.073 0.10 EEVFK1H471M 1610 0.073 0.10 EEVFK1H561M 1610 0.073 0.10 EEVFK1H681M 1610 0.073 0.10 EEVFK1H102M 50 3.00 0.08 EEEFK1J4R7R 80 1.50 0.08 EEEFK1J100P 120 1.20 0.08 EEEFK1J220XP 120 1.20 0.08 EEEFK1J220P 250 0.65 0.08 EEEFK1J330P 250 0.65 0.08 EEEFK1J470P 250 0.65 0.08 EEEFK1J680UP 400 0.35 0.08 EEEFK1J101P 800 0.16 0.08 EEVFK1J151Q 800 0.16 0.08 EEVFK1J221Q 1410 0.082 0.08 EEVFK1J471M 1690 0.08 0.08 EEVFK1J681M 25 5.00 0.08 EEEFK1K3R3R 40 3.00 0.08 EEEFK1K4R7P 60 2.40 0.08 EEEFK1K100XP 60 2.40 0.08 EEEFK1K100P 130 1.30 0.08 EEEFK1K220P 130 1.30 0.08 EEEFK1K330P 200 0.70 0.08 EEEFK1K470P 500 0.32 0.08 EEVFK1K680Q 500 0.32 0.08 EEVFK1K101Q 500 0.32 0.08 EEVFK1K151Q 793 0.17 0.08 EEVFK1K331M 917 0.153 0.08 EEVFK1K471M Reflow (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) Taping (pcs) 2000 2000 1000 1000 1000 1000 900 900 500 500 500 500 200 200 125 125 2000 1000 1000 1000 900 1000 900 1000 500 500 500 200 200 125 125 125 125 1000 1000 900 1000 500 500 500 500 200 200 125 125 1000 1000 900 1000 500 500 500 200 200 200 125 125 ✽ Size code( ):Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-43 – Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) Case size W.V. (V) 100 Cap. (±20 %) (μF) 22 33 47 68 100 150 220 330 Dia. Length (mm) 8 10 12.5 12.5 16 16 18 18 (mm) 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code F G H13 H13 J16 J16 K16 K16 Ripple Impedance tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 130 1.30 0.07 EEEFK2A220P 200 0.70 0.07 EEEFK2A330P 500 0.32 0.07 EEVFK2A470Q 500 0.32 0.07 EEVFK2A680Q 793 0.17 0.07 EEVFK2A101M 793 0.17 0.07 EEVFK2A151M 917 0.153 0.07 EEVFK2A221M 917 0.153 0.07 EEVFK2A331M Reflow (2) (2) (3) (3) (3) (3) (3) (3) Taping (pcs) 500 500 200 200 125 125 125 125 ✽ Size code( ):Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. ■ Endurace 5000 h Products Endurance : 105 °C 5000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (μF) 470 1000 1500 330 470 680 1000 330 470 680 150 220 330 470 100 150 220 330 100 150 220 Dia. Length (mm) 8 8 10 8 8 8 10 8 8 10 8 8 8 10 8 8 8 10 8 10 10 (mm) 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code F F G F F F G F F G F F F G F F F G F G G Ripple Impedance tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 600 0.16 0.26 EEEFK0J471GP 0.26 EEEFK0J102GP 600 0.16 850 0.08 0.26 EEEFK0J152GP 600 0.16 0.19 EEEFK1A331GP 600 0.16 0.19 EEEFK1A471GP 0.16 0.19 EEEFK1A681GP 600 850 0.08 0.19 EEEFK1A102GP 600 0.16 0.16 EEEFK1C331GP 600 0.16 0.16 EEEFK1C471GP 850 0.08 0.16 EEEFK1C681GP 600 0.16 0.14 EEEFK1E151GP 600 0.16 0.14 EEEFK1E221GP 600 0.16 0.14 EEEFK1E331GP 850 0.08 0.14 EEEFK1E471GP 600 0.16 0.12 EEEFK1V101GP 600 0.16 0.12 EEEFK1V151GP 600 0.16 0.12 EEEFK1V221GP 850 0.08 0.12 EEEFK1V331GP 350 0.34 0.10 EEEFK1H101GP 670 0.18 0.10 EEEFK1H151GP 670 0.18 0.10 EEEFK1H221GP Reflow (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) Taping (pcs) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-44 –