Wall DTSPU60-111 60 watt single output ac/dc desktop power supply Datasheet

DTSPU60 Series
Rev A
60 Watt
Single Output
AC/DC Desktop Power Supply
FEATURES
● Splash Proof
● 2 Year Warranty
● Class I Insulation
● IEC-320-C14 Input Inlet
● Optional Output Connector
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● Output Voltage Protection (Crowbar Design)
● Output Voltage Available from 3VDC thru 50VDC
SPECIFICATIONS: DTSPU60 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Nom
Max
INPUT (Vin)
Operating Voltage Range
Input Frequency
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current
Start-Up Time
OUTPUT (Vo)
Output Voltage Range
Load Regulation
Line Regulation
Output Power
Output Current Range
*Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
PROTECTION
Over Voltage Protection
Over Current Protection
GENERAL
Efficiency
Dielectric Withstanding Voltage
For Primary to Secondary
Dielectric Withstanding Voltage
For Primary to Ground
Isolation Resistance
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
Temperature Coefficient
PHYSICAL
Weight
Dimensions
Warranty
SAFETY
EMI Requirements for CISPR-22
EMI Requirements for FCC PART-15
90
47
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 100VAC
0.3
12
26
0.5
1
264
63
1.6
1.0
15
30
0.75
2
See Rating Chart
3
7
0.5
1
0
60
See Rating Chart
0.5
1
4
16
Vin = 230VAC
Io = Full Load
Vin = 90 to 264VAC
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 110VAC
112
110
Io = Full Load, Vin = 230VAC
70
132
150
83
88
Unit
VAC
Hz
A
A
A
A
mA
s
VDC
%
%
W
A
%
ms
ms
%
%
%
Primary to Secondary
4242
VDC
Primary to Ground
2121
VDC
50
MΩ
Test Voltage = 500VDC
Derate linearly from 100% Load at 40°C to 50% load at 70°C
All Outputs
0
-40
5
-0.04
+70
+85
95
+0.04
Approximately 340
4.65 x 2.05 x 1.36
2
Vin = 220VAC
Vin = 110VAC
*Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
B
B
°C
°C
%
%/°C
grams
inches
years
Class
Class
DTSPU60 Series
60 Watt
Single Output
AC/DC Desktop Power Supply
Rev A
OUTPUT VOLTAGE / CURRENT RATING CHART
Preset Voltage
Output
Voltage Range
Output Current
Total Regulation
Maximum
Output Power
DTSPU60-101
3 VDC
3 ~ 5 VDC
6.60 ~ 4.00 A
7%
20W
DTSPU60-102
5 VDC
5 ~ 6 VDC
6.00 ~ 5.00 A
5%
30W
DTSPU60-103
6 VDC
6 ~ 8 VDC
5.83 ~ 4.37 A
5%
35W
DTSPU60-104
8 VDC
8 ~ 11 VDC
5.00 ~ 3.63 A
5%
40W
DTSPU60-105
11 VDC
11 ~ 13 VDC
4.54 ~ 3.84 A
5%
50W
DTSPU60-105-1
12 VDC
11 ~ 13 VDC
5.45 ~ 4.61
5%
60W
*DTSPU60-106
13 VDC
13 ~ 16 VDC
4.23 ~ 3.43 A
5%
55W
*DTSPU60-107
16 VDC
16 ~ 21 VDC
3.75 ~ 2.85 A
5%
60W
*DTSPU60-108
21 VDC
21 ~ 27 VDC
2.85 ~ 2.22 A
5%
60W
*DTSPU60-109
27 VDC
27 ~ 33 VDC
2.22 ~ 1.81 A
5%
60W
*DTSPU60-110
33 VDC
33 ~ 40 VDC
1.81 ~ 1.50 A
3%
60W
*DTSPU60-111
40 VDC
40 ~ 50 VDC
1.50 ~ 1.20 A
3%
60W
Model Number
NOTES
1. The asterisk “ * ” next to the model number indicates PSE approval.
2. The output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing
different is requested. Please contact factory for ordering details.
3. Models with output voltages from 15VDC ~ 30VDC have been approved by TUV/PSE. Models with output voltages from
30VDC ~ 50VDC have been approved by JET/PSE.
4. Optional output connectors are available (see “DC Output Plug Selector List” link located at the bottom of the “Desktop”
category page). Please call factory for ordering details.
DERATING CURVE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
DTSPU60 Series
Rev A
60 Watt
Single Output
AC/DC Desktop Power Supply
MECHANICAL DRAWING
Unit: inches [mm]
NOTES
1. Dimensions are shown in inches [mm]
2. Weight: Approximately 265 ~ 280 grams.
3. Optional output connectors available:
(“DC Output Plug Selector List”)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Similar pages