ILSI I731-3Q3-20.000 Surface mount oscillator, tcxo, tcvcxo ceramic package, 5 mm x 7 mm Datasheet

Surface Mount Oscillator, TCXO, TCVCXO
Ceramic Package, 5 mm x 7 mm
I531 / I731 Series *
Frequency
Output Level
Level
Output Load
Frequency Stability
Frequency Stability at +25° C
Aging
Supply Voltage
Current
Control Voltage (I731)
Slope
Temperature
Operating
Storage
Environmental
Package Information
10.000 MHz to 27.000 MHz
Clipped Sine
0.8 V p-p Min.
20K Ohms / 10 pF
See Frequency Stability Table
± 1 ppm (I531)
± 1 ppm / Year Max.
See Supply Voltage Table, tolerance ±5 %
2 mA Max.
1.5 VDC ± 1.0 VDC, ±5 ppm Min.
Positive
See Operating Temperature Table
-40° C to +85° C
See Appendix B for information
MSL = N.A., Termination = e4
* I531 = Clipped Sine TCXO, I731 = Clipped Sine TCVCXO
Part Number Guide
Package and Output
I531 I731 -
Sample Part Number:
I531 - 1Q3 - 20.000
Operating Temperature
Frequency Stability vs. Temperature
7 = 0° C to +50° C
**O = ±1.5 ppm
Supply Voltage
3 = 3.3 VDC
1 = 0° C to +70° C
**P = ±2.0 ppm
7 = 3.0 VDC
3 = -20° C to +70 C
Q = ±2.5 ppm
2 = 2.7 VDC
2 = -40° C to +85° C
R = ±3.0 ppm
J = ±5.0 ppm
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and Gnd (pin 2) to minimize power supply noise.
** Not available at all temperature ranges.
12/06
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
Specifications subject to change without notice
F4
Frequency
- 20.000 MHz
Similar pages