MINIATURE POWER FILM RESISTORS MG SERIES - 1/2W & 1W FS SERIES - 1W, 2W, 3W RESISTORSCAPACITORSCOILSDELAY LINES RoHS Term.W is RoHS compliant & 260°C compatible FEATURES Industry’s smallest power film resistors! Miniature sizes enable significant space savings Replaces wirewound types at reduced cost 0.1Ω to 1 Meg, standard tolerances: ±1%, ±2%, ±5% (Series MG available to 0.1%) All sizes available on horizontal or vertical tape Increased power is achieved by a special film process and high grade alumina cores. The unique structure of these materials also achieves increased working voltages and superior pulse capability compared to typical film resistors. The low inductance inherent in film construction enables use at high frequencies thereby fulfilling a wider range of applications compared to wirewound resistors. Series MG are desgned for precision and semi-precision applications, with tolerances available to 0.1% and TC’s available to 25ppm. Series FS are designed for semi-precision and general purpose 1% to 5% applications (1% to 5% tolerance with typical TC stability of 100ppm). Series FS resistors also feature a flameproof coating as standard (optional on MG series). Marking is stamped or color banded. OPTIONS Options include increased voltages, custom marking, cut & formed leads, high pulse (Opt. P), molded version (Opt. 49), TC’s to 25ppm, Sn-Pb terminations, Military screening, etc. H L D d SPECIFICATIONS RCD Type Wattage Resistance Range Max Voltage Rating* Dielectric Strength L ± .025 [.8] D ± .025 [.6] d ± .003 [.08] H (Min.)** MG1/2 1/2W @ 25°C 1Ω to 1M 200V 250V .150 [3.81] .066 [1.68] .018 [.45] .945 [24] MG1 1W @ 25°C 0.1Ω to 1M 250V 500V .250 [6.35] .090 [2.3] .024 [.6] .945 [24] F 1S 1W @ 70°C 0.1Ω to 1M 350V 350V .250 [6.35] .090 [2.3] .024 [.6] .945 [24] F 2S 2W @ 70°C 0.1Ω to 1M 400V 500V .420 [10.67] .159 [4.0] .031 [.8] 1.25 [31.7] F 3S 3W @ 70°C 0.1Ω to 1M 500V 500V .580 [14.7] .200 [5.08] .031 [.8] 1.25 [31.7] (PR)1/2 * Working voltage determined by E= , E not to exceed Max Voltage Rating. Consult factory for short time overload or surge voltage capability. ** Lead length dimension is for bulk packaged parts, consult Taping specifications for parts supplied on Tape&Reel Specifications (1Ω-100K) Temperature Coefficient MG Series ±100ppm/°C typ., 25&50ppm avail. FS Series ±100ppm/°Ctyp. PERCENT OF RATED W & V DERATING TYPICAL PERFORMANCE 100 75 B 50 A 25 0 A= MG Series B= FS Series 25 50 75 100 125 150 175 200 AMBIENT TEMPERATURE (°C) Insulation Resis. (min.) 10,000 MΩ 10,000 MΩ Load Life (1000 hours) ±1% ±5% P/N DESIGNATION: Short-time Overload ±0.5% ±0.5% RCD Type Option Codes: Q, P, etc. (leave blank if std) Temperature Cycling ±0.5% ±1% Moisture Resistance ±1% ±2% Shock and Vibration ±0.2% ±0.2% Effect of Soldering ±0.5% ±0.5% Voltage Coefficient < .001%/V < .001%/V Operating Temp. Range -55°C to +175C -55°C to +200°C F1S - 102 - J T W Resis.Code 0.1% - 1%: 3 signif. digits & multiplier (R100=0.1Ω, 1R00=1Ω,10R0=10Ω,1000=100Ω, 1001=1K,1002=10K, 1003=100K,1004=1M) Resis.Code 2%-5%: 2 signif. figures & multiplier (R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, 105=1M) Tolerance Code: J=5%, G=2%, F=1%. In addition, tolerances of 0.5%(D), 0.25%(C), and 0.1%(B) are available on MG Series Packaging: B = Bulk, T = Tape & Reel Optional Temp. Coefficient: 25=25ppm, 50=50ppm, 101=100ppm, 201=200ppm (leave blank for standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA070B 65 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.